The complex flow field in the tip region of a turbomachine rotor, including the tip leakage flow and tip leakage vortex (TLV), has been studied for decades. Yet many associated phenomena are still not understood. This paper provides detailed data on the instantaneous and phase averaged inner structure of the tip flow, and evolution of the TLV. Observations are based on series of high resolution planar particle image velocimetry measurements performed in a transparent waterjet pump fitted into an optical refractive index matched test facility. Velocity distributions and turbulence statistics are obtained in several meridional planes inside the rotor. We observe that the instantaneous TLV structure is composed of several unsteady vortex filaments that propagate into the blade passage. These filaments are first embedded into a vortex sheet generated at the suction side of the blade tip, and then they wrap around each other and roll up into the TLV. These vortices do not have sufficient time to merge into a single compact structure within the blade passage. We also find that the leakage vortex induces flow separation at the casing endwall and entrains the casing boundary layer with its counter-rotating vorticity. As it propagates in the rotor passage, the TLV migrates towards the pressure side of the neighboring blade. Unsteadiness associated with observed vortical structures is also investigated. We notice that, at early stages of the TLV evolution, turbulence is elevated in the vortex sheet, in the flow entrained from the endwall, and near the vortex core. Interestingly, the turbulence observed around the core is not consistent with the local distribution of turbulent kinetic energy production rate. This mismatch indicates that, given a TLV section, production likely occurs at preceding stages of the vortex evolution. Then, the turbulence is convected to the core of the TLV, and we suggest that this transport has substantial component along the vortex. Because we observe that the meandering of vortex filaments dominate the flow in the passage, we decompose the unsteadiness surrounding the TLV core to contributions from interlaced vortices and broadband turbulence. Results of this decomposition show that the two contributions are of the same order of magnitude. The TLV is investigated also beyond the trailing edge of the rotor blade. During these late stages of its evolution, the TLV approaches the pressure side of the neighboring blade and vortex breakdown occurs, causing rapid broadening of the phase average core, with little change in overall circulation. Associated turbulence occupies almost half the width of the blade passage and turbulence production there is also broadly distributed. Proximity of the TLV to the pressure side of the neighboring blade also affects entrainment of flow into the incoming tip region.
Skip Nav Destination
ASME Turbo Expo 2010: Power for Land, Sea, and Air
June 14–18, 2010
Glasgow, UK
Conference Sponsors:
- International Gas Turbine Institute
ISBN:
978-0-7918-4402-1
PROCEEDINGS PAPER
The Internal Structure of the Tip Leakage Vortex Within the Rotor of an Axial Waterjet Pump Available to Purchase
Rinaldo L. Miorini,
Rinaldo L. Miorini
Universita` degli Studi di Bergamo, Dalmine, BG, Italy
Search for other works by this author on:
Huixuan Wu,
Huixuan Wu
Johns Hopkins University, Baltimore, MD
Search for other works by this author on:
Joseph Katz
Joseph Katz
Johns Hopkins University, Baltimore, MD
Search for other works by this author on:
Rinaldo L. Miorini
Universita` degli Studi di Bergamo, Dalmine, BG, Italy
Huixuan Wu
Johns Hopkins University, Baltimore, MD
Joseph Katz
Johns Hopkins University, Baltimore, MD
Paper No:
GT2010-23056, pp. 403-419; 17 pages
Published Online:
December 22, 2010
Citation
Miorini, RL, Wu, H, & Katz, J. "The Internal Structure of the Tip Leakage Vortex Within the Rotor of an Axial Waterjet Pump." Proceedings of the ASME Turbo Expo 2010: Power for Land, Sea, and Air. Volume 7: Turbomachinery, Parts A, B, and C. Glasgow, UK. June 14–18, 2010. pp. 403-419. ASME. https://doi.org/10.1115/GT2010-23056
Download citation file:
24
Views
Related Articles
The Internal Structure of the Tip Leakage Vortex Within the Rotor of an Axial Waterjet Pump
J. Turbomach (May,2012)
Tip Clearance Effects in a Turbine Rotor: Part II—Velocity Field and Flow Physics
J. Turbomach (April,2001)
Related Chapters
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Introduction
Design and Analysis of Centrifugal Compressors
Introduction
Mixed-flow Pumps: Modeling, Simulation, and Measurements