Reduction of CO2 emissions is strongly linked with the improvement of engine specific fuel consumption, as well as the reduction of engine nacelle drag and weight. Conventional turbofan designs however that reduce CO2 emissions — such as increased OPR designs — can increase the production of NOx emissions. In the present work, funded by the European Framework 6 collaborative project NEWAC, an aero engine multidisciplinary design tool, TERA2020, has been utilised to study the potential benefits from introducing heat-exchanged cores in future turbofan engine designs. The tool comprises of various modules covering a wide range of disciplines: engine performance, engine aerodynamic and mechanical design, aircraft design and performance, emissions prediction and environmental impact, engine and airframe noise, as well as production, maintenance and direct operating costs. Fundamental performance differences between heat-exchanged cores and a conventional core are discussed and quantified. Cycle limitations imposed by mechanical considerations, operational limitations and emissions legislation are also discussed. The research work presented in this paper concludes with a full assessment at aircraft system level that reveals the significant potential performance benefits for the inter-cooled and intercooled recuperated cycles. An intercooled core can be designed for a significantly higher OPR and with reduced cooling air requirements, providing a higher thermal efficiency than could otherwise be practically achieved with a conventional core. Variable geometry can be implemented to optimise the use of the intercooler for a given flight mission. An intercooled recuperated core can provide high thermal efficiency at low OPR values and also benefit significantly from the introduction of a variable geometry low pressure turbine. The necessity of introducing novel lean-burn combustion technology, to reduce NOx emissions, at cruise as well as for the landing and take-off cycle, is demonstrated for both heat-exchanged cores and conventional designs. Significant benefits in terms of NOx reduction are predicted from the introduction of a variable geometry low pressure turbine in an intercooled core with lean-burn combustion technology.
- International Gas Turbine Institute
Assessment of Future Aero Engine Designs With Intercooled and Intercooled Recuperated Cores
- Views Icon Views
- Share Icon Share
- Search Site
Kyprianidis, KG, Gro¨nstedt, T, Ogaji, SOT, Pilidis, P, & Singh, R. "Assessment of Future Aero Engine Designs With Intercooled and Intercooled Recuperated Cores." Proceedings of the ASME Turbo Expo 2010: Power for Land, Sea, and Air. Volume 3: Controls, Diagnostics and Instrumentation; Cycle Innovations; Marine. Glasgow, UK. June 14–18, 2010. pp. 909-920. ASME. https://doi.org/10.1115/GT2010-23621
Download citation file: