An experimental study was conducted to investigate the heat transfer characteristics of film cooling on a rotating turbine blade model with a single cylindrical injection hole. As an important supplement to the study of Tao et al. [Z. Tao, Z.M. Zhao, S.T. Ding, G.Q. Xu, B. Yang and H.W. Wu, Experimental investigation of film cooling on a rotating turbine blade model: Part I. Effect of blowing ratio on heat transfer coefficients], the effects of Reynolds number ReD and rotation number Rt on local heat transfer coefficient distributions are presented in this paper. A steady-state thermochromic liquid crystal technique was employed to measure the temperature distribution of test surface on the blade model, and a telemetering data acquisition system was used to collect the signals from the rotating blade model by wireless approach. During the experiments, the Reynolds number based on the mainstream velocity and film hole diameter varies from 1841 to 4296, and the rotation number ranges from 0 to 0.0249. Both the air and CO2 are used as coolant, yielding the averaged density ratio of DR = 1.02 and 1.53, respectively. Experimental results show that the rotational effect has a significant influence on the heat transfer coefficient distributions. The profiles of h/h0, which is the ratio of heat transfer coefficient with film cooling to that without film cooling, will deflect towards the high-radius locations due to the strong centrifugal effect as Rt increases, and the deflective tendency of h/h0 is more apparent on the suction surface. The h/h0 values augment with the incremental ReD on the pressure surface, but decline firstly and then increase again on the suction surface. Furthermore, the averaged values of h/h0 for CO2 injection presents lower magnitudes as compared to the air injection.
Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part II—Effects of Reynolds Number and Rotation Number
- Views Icon Views
- Share Icon Share
- Search Site
Wu, H, Xu, G, Yang, B, Tao, Z, Ding, S, & Zhao, Z. "Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part II—Effects of Reynolds Number and Rotation Number." Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea, and Air. Volume 4: Heat Transfer, Parts A and B. Berlin, Germany. June 9–13, 2008. pp. 533-541. ASME. https://doi.org/10.1115/GT2008-50535
Download citation file: