Skip Nav Destination
Proceedings Papers
In This Volume
Volume 7B: Structures and Dynamics
Bearing and Seal Dynamics
Rotordynamic Characterization of Labyrinth Seals in Steam Turbines: Effects of Thermal and Mechanical Loads
Filippo Cangioli, Steven Chatterton, Paolo Pennacchi, Leonardo Nettis, Lorenzo Ciuchicchi, Andrea Vania, Giuseppe Vannini
GT 2018; V07BT34A001https://doi.org/10.1115/GT2018-75009
Topics:
Steam turbines
,
Stress
,
Flow (Dynamics)
,
Machinery
,
Stability
,
Annulus
,
Centrifugal force
,
Clearances (Engineering)
,
Geometry
,
Heat transfer
Degradation Feature Extraction of Rolling Bearings Based on Optimal Ensemble Empirical Mode Decomposition and Improved Composite Spectrum Analysis
GT 2018; V07BT34A002https://doi.org/10.1115/GT2018-75041
Topics:
Composite materials
,
Emission spectroscopy
,
Feature extraction
,
Rolling bearings
,
Spectroscopy
,
Bearings
,
Signals
,
Vibration
,
Turbomachinery
,
Algorithms
Rotordynamic Characterization of a Staggered Labyrinth Seal: Experimental Test Data and Comparison With Predictions
Filippo Cangioli, Giuseppe Vannini, Paolo Pennacchi, Lorenzo Ciuchicchi, Leonardo Nettis, Steven Chatterton
GT 2018; V07BT34A003https://doi.org/10.1115/GT2018-75072
Topics:
Clearances (Engineering)
,
Compressors
,
Dynamics (Mechanics)
,
Flow (Dynamics)
,
Fluids
,
Gas turbines
,
High pressure (Physics)
,
Kinetic energy
,
Leakage
,
Pressure
Leakage and Rotordynamic Force Coefficients of a Three-Wave (Air in Oil) Wet Annular Seal: Measurements and Predictions
GT 2018; V07BT34A004https://doi.org/10.1115/GT2018-75200
Topics:
Leakage
,
Waves
,
Clearances (Engineering)
,
Flow (Dynamics)
,
Pumps
,
Stiffness
,
Damping
,
Pressure
,
Rotors
,
Collapse
Leakage and Dynamic Force Coefficients for Two Labyrinth Gas Seals: Teeth-on-Stator and Interlocking Teeth Configurations — A CFD Approach to Their Performance
GT 2018; V07BT34A005https://doi.org/10.1115/GT2018-75205
Topics:
Computational fluid dynamics
,
Leakage
,
Stators
,
Pressure
,
Rotors
,
Damping
,
Flow (Dynamics)
,
Stiffness
,
Whirls
,
Cavities
Validation of CFD Analysis Method for Seal Dynamic Coefficients With Various Labyrinth Seal Types
Makoto Iwasaki, Kenichi Murata, Rimpei Kawashita, Yasunori Tokimasa, Kazuyuki Matsumoto, Makoto Kamishita
GT 2018; V07BT34A006https://doi.org/10.1115/GT2018-75251
Topics:
Computational fluid dynamics
,
Rotors
,
Fins
,
Stators
,
Steam turbines
,
Whirls
,
Accelerometers
,
Air flow
,
Coating processes
,
Coatings
Tilting-Pad Journal Bearing in Hybrid Operation: A Numerical and Experimental Investigation
GT 2018; V07BT34A007https://doi.org/10.1115/GT2018-75256
Topics:
Journal bearings
,
Bearings
,
Deformation
,
Load bearing capacity
,
Hydrostatic pressure
,
Hydrostatics
,
Turbines
,
Viscosity
,
Film thickness
,
Lubricants
Design and Evaluation of Hybrid Magnetic Bearings for Turbo Compressors
GT 2018; V07BT34A008https://doi.org/10.1115/GT2018-75273
Topics:
Compressors
,
Design
,
Magnetic bearings
,
Turbochargers
,
Sensors
,
Thrust
,
Vibration
,
Machinery
,
Rotors
,
Stress
Static and Rotordynamic Characteristics of Liquid Annular Seals With a Circumferentially-Grooved Stator and Smooth Rotor Using Three Levels of Circumferential Inlet-Fluid Rotation
GT 2018; V07BT34A009https://doi.org/10.1115/GT2018-75325
Topics:
Fluids
,
Rotation
,
Rotors
,
Stators
,
Stiffness
,
Damping
,
Pumps
,
Clearances (Engineering)
,
Flowmeters
,
Geometry
Experimental Study of the Leakage and Rotordynamic Coefficients of a Long Smooth Seal With Two-Phase, Mainly-Oil Mixtures
GT 2018; V07BT34A010https://doi.org/10.1115/GT2018-75328
Topics:
Leakage
,
Flow (Dynamics)
,
Stiffness
,
Damping
,
Fluids
,
Rotors
,
Bubbles
,
Clearances (Engineering)
,
Friction
,
Pressure
On the Design, Manufacture and Premature Failure of a Metal Mesh Thrust Bearing: How Concepts That Work on Paper, Actually Do Not
GT 2018; V07BT34A012https://doi.org/10.1115/GT2018-75340
Topics:
Design
,
Failure
,
Metals
,
Thrust bearings
,
Bearings
,
Rotors
,
Damping
,
Foil bearings
,
Stress
,
Coating processes
Ultra-High Temperature Compliant Foil Bearings: The Journey to 870°C and Application in Gas Turbine Engines — Experiment
GT 2018; V07BT34A016https://doi.org/10.1115/GT2018-75555
Topics:
Foil bearings
,
Gas turbines
,
Temperature
,
Bearings
,
Ceramics
,
High temperature
,
Testing
,
Turbochargers
,
Air Force
,
Automotive engines
Development of High Specific Load and Low Mechanical Loss Journal Bearing With Two Pads of Tilting Supported Type
GT 2018; V07BT34A017https://doi.org/10.1115/GT2018-75593
Topics:
Journal bearings
,
Stress
,
Bearings
,
Rotors
,
Turbines
,
Design
,
Steam turbines
,
Blades
,
Construction
,
Countermeasures
Nonlinear Analysis of Rotordynamic Fluid Forces in the Annular Plain Seal by Using Extended Bulk-Flow Analysis: Influence of Static Eccentricity and Whirling Amplitude
GT 2018; V07BT34A020https://doi.org/10.1115/GT2018-75645
Topics:
Flow (Dynamics)
,
Fluids
,
Whirls
,
Machinery
,
Design
,
Rotors
,
Stress
,
Turbomachinery
,
Vibration
Potentials and Limitations of an Extended Approximation Method for Nonlinear Dynamic Journal and Thrust Bearing Forces
GT 2018; V07BT34A022https://doi.org/10.1115/GT2018-75662
Topics:
Approximation
,
Thrust bearings
,
Bearings
,
Simulation
,
Algorithms
,
Cavitation
,
Journal bearings
,
Differential equations
,
Errors
,
Modeling
Comparison of Modelling Approaches for Bump-Type Foil Thrust Bearings Operating With CO2
GT 2018; V07BT34A023https://doi.org/10.1115/GT2018-75705
Topics:
Carbon dioxide
,
Modeling
,
Thrust bearings
,
Computational fluid dynamics
,
Deformation
,
Rotors
,
Separation (Technology)
,
Stress
,
Deflection
,
Heating
Hydrodynamic Journal Bearings Optimization Considering Rotor Dynamics Restrictions
GT 2018; V07BT34A024https://doi.org/10.1115/GT2018-75790
Topics:
Journal bearings
,
Optimization
,
Rotordynamics
,
Bearings
,
Design
,
Rotors
,
Film thickness
,
Simulation
,
Clearances (Engineering)
,
Electromagnetic induction
Measurements of the Leakage and Rotordynamic Performance of Interlocking Labyrinth Seals
GT 2018; V07BT34A025https://doi.org/10.1115/GT2018-75885
Topics:
Leakage
,
Cavities
,
Pressure
,
Rotors
,
Stators
,
Brakes
,
Damping
,
Magnetic bearings
,
Clearances (Engineering)
,
Stability
Numerical Investigation for Characteristics and Oil-Air Distributions of Oil Film in a Tilting-Pad Journal Bearing
GT 2018; V07BT34A027https://doi.org/10.1115/GT2018-75888
Topics:
Journal bearings
,
Cavitation
,
Shear stress
,
Bearings
,
Pressure
,
Rotors
,
Stress
,
Air flow
,
Computer simulation
,
High pressure (Physics)
Effect of Circumferential Location of Radial Injection on Rotordynamic Performance of Hybrid Air Foil Bearings
GT 2018; V07BT34A029https://doi.org/10.1115/GT2018-75983
Topics:
Foil bearings
,
Rotors
,
Orifices
,
Stability
,
Bearings
,
Damping
,
Film thickness
,
High temperature
,
Modal analysis
,
Simulation
Improvement of Low Frequency Vibration Isolation Capability of AMB Using a Cascade PID Controller
GT 2018; V07BT34A030https://doi.org/10.1115/GT2018-76023
Topics:
Cascades (Fluid dynamics)
,
Control equipment
,
Vibration isolation
,
Rotors
,
Vibration
,
Simulation
,
Bearings
,
Damping
,
Design
,
Displacement
Experimental Force Coefficients for Two Sealed Ends Squeeze Film Dampers (Piston Rings and O-Rings): An Assessment of Their Similarities and Differences
GT 2018; V07BT34A032https://doi.org/10.1115/GT2018-76224
Topics:
Dampers
,
Piston rings
,
Seals
,
Pressure
,
Damping
,
Lubricants
,
Inertia (Mechanics)
,
Bearings
,
Cavitation
,
Flow (Dynamics)
Effect of Axial Force on Rotordynamics of a Rigid Rotor Supported by Foil Bearings
GT 2018; V07BT34A033https://doi.org/10.1115/GT2018-76261
Topics:
Foil bearings
,
Rotordynamics
,
Rotors
,
Bearings
,
Stability
,
Modal analysis
,
Simulation
,
Stiffness
,
Damping
,
Degrees of freedom
A Feasibility Study of Controllable Gas Foil Bearings With Piezoelectric Materials via Rotordynamic Model Predictions
GT 2018; V07BT34A034https://doi.org/10.1115/GT2018-76273
Topics:
Foil bearings
,
Piezoelectric materials
,
Bearings
,
Clearances (Engineering)
,
Lubrication
,
Shapes
,
Damping
,
Film thickness
,
Fluid films
,
Gas bearings
Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments
GT 2018; V07BT34A035https://doi.org/10.1115/GT2018-76308
Topics:
Dampers
,
Damping
,
Cavitation
,
Flow (Dynamics)
,
Gas bearings
,
Stiffness
,
Clearances (Engineering)
,
Bearings
,
Cavities
,
Density
Compliant Hybrid Gas Bearing Using Modular Hermetically-Sealed Squeeze Film Dampers
GT 2018; V07BT34A036https://doi.org/10.1115/GT2018-76312
Topics:
Dampers
,
Gas bearings
,
Bearings
,
Damping
,
Stress
,
Flow (Dynamics)
,
Testing
,
Bearing design
,
Carbon
,
Cavities
Vibration Isolation of Rotating Machinery by Parameters Switched Magnetic Bearing and High Static Low Dynamic Stiffness Supports
GT 2018; V07BT34A038https://doi.org/10.1115/GT2018-76535
Topics:
Machinery
,
Magnetic bearings
,
Stiffness
,
Vibration isolation
,
Vibration
,
Bearings
,
Rotors
,
Design
,
Damping
,
Displacement
A CFD Based Approach for Estimation of Rotor Dynamic Coefficients for Liquid Annular Seals in Turbomachinery
GT 2018; V07BT34A039https://doi.org/10.1115/GT2018-76634
Topics:
Computational fluid dynamics
,
Rotors
,
Turbomachinery
,
Fluids
,
Flow (Dynamics)
,
Leakage
,
Stability
,
Clearances (Engineering)
,
Curve fitting
,
Damping
Floating Shock Platform Testing of a Magnetic Bearing Supported Chiller Compressor: Measurements and Simulation Results
GT 2018; V07BT34A042https://doi.org/10.1115/GT2018-77031
Topics:
Compressors
,
Magnetic bearings
,
Shock (Mechanics)
,
Simulation results
,
Testing
,
Bearings
,
Engines
,
Motors
,
Navy
,
Rotors
A High Speed Test Rig Capable of Running at 190,000rpm to Characterize Gas Foil Thrust Bearings
GT 2018; V07BT34A043https://doi.org/10.1115/GT2018-77111
Topics:
Thrust bearings
,
Stress
,
Bearings
,
Testing
,
Design
,
Energy consumption
,
Film thickness
,
Instrumentation
,
Temperature
,
Test facilities
Development of a Non-Contacting Mechanical Seal for High Performance Turbocharger Applications
GT 2018; V07BT34A044https://doi.org/10.1115/GT2018-77126
Topics:
Turbochargers
,
Pressure
,
Design
,
Tribology
,
Wear
,
Automotive engines
,
Bearings
,
Compressors
,
Computational fluid dynamics
,
Durability
Development and Validation of Test Rig for Measurements of Leakage and Rotordynamic Performance of Interlocking Labyrinth Seals
GT 2018; V07BT34A045https://doi.org/10.1115/GT2018-77131
Topics:
Leakage
,
Cavities
,
Damping
,
Pressure
,
Rotors
,
Stators
,
Stiffness
,
Pressure measurement
,
Turbomachinery
,
Waves
On the Leakage, Torque and Dynamic Force Coefficients of an Air in Oil (Wet) Annular Seal: A CFD Analysis Anchored to Test Data
GT 2018; V07BT34A046https://doi.org/10.1115/GT2018-77140
Topics:
Computational fluid dynamics
,
Leakage
,
Torque
,
Stiffness
,
Drag (Fluid dynamics)
,
Pumps
,
Clearances (Engineering)
,
Damping
,
Flow (Dynamics)
,
Pressure
A Thermoelastohydrodynamic Analysis for the Static Performance of High-Speed Heavy Load Tilting-Pad Journal Bearing Operating in the Turbulent Flow Regime and Comparisons to Test Data
GT 2018; V07BT34A047https://doi.org/10.1115/GT2018-77151
Topics:
Journal bearings
,
Stress
,
Turbulence
,
Temperature
,
Bearings
,
Pressure
,
Deformation
,
Flow (Dynamics)
,
Rotors
,
Clearances (Engineering)
Predictions for Non-Contacting Mechanical Face Seal Vibration With External Excitation From Pump Vibration: Part I — Flexibly Mounted Stator
GT 2018; V07BT34A048https://doi.org/10.1115/GT2018-77198
Topics:
Excitation
,
Pumps
,
Stators
,
Vibration
,
Flexible manufacturing systems
,
Seals
,
Stability
,
Damping
,
Fluid films
,
Inertia (Mechanics)
Predictions for Non-Contacting Mechanical Face Seal Vibration With External Excitation From Pump Vibration: Part II — Flexibly Mounted Rotor
GT 2018; V07BT34A049https://doi.org/10.1115/GT2018-77200
Topics:
Excitation
,
Pumps
,
Rotors
,
Vibration
,
Seals
,
Fluid films
,
Clearances (Engineering)
,
Damping
,
Failure
,
Inertia (Mechanics)
Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing With Hermetically Sealed Squeeze Film Damper Modules
GT 2018; V07BT34A050https://doi.org/10.1115/GT2018-77212
Topics:
Bearings
,
Dampers
,
Damping
,
Design
,
Rotors
,
Gas bearings
,
Metals
,
Stiffness
,
Stress
,
Turbomachinery