Skip Nav Destination
Proceedings Papers
Volume 2B: Turbomachinery
Axial Flow Turbine Aerodynamics
Aerodynamic Interaction Between Incoming Vortex and Tip Leakage Flow in a Turbine Cascade
GT 2018; V02BT41A002https://doi.org/10.1115/GT2018-75138
Topics:
Cascades (Fluid dynamics)
,
Leakage flows
,
Turbines
,
Vortices
,
Leakage
,
Swirling flow
,
Flow (Dynamics)
,
Generators
,
Vorticity
,
Analytical methods
A High Fidelity Quality Assessment of High Pressure Turbine Blades Using Surface Curvature and Gradient-Based Adjoint
GT 2018; V02BT41A003https://doi.org/10.1115/GT2018-75157
Topics:
Airfoils
,
Gas turbines
,
High pressure (Physics)
,
Manufacturing
,
Shape optimization
,
Surface quality
,
Turbine blades
The Effect of Turbulent Scales on Low-Pressure Turbine Aerodynamics: Part A — An Optimized Turbulent Boundary-Condition
GT 2018; V02BT41A004https://doi.org/10.1115/GT2018-75162
Topics:
Aerodynamics
,
Boundary-value problems
,
Pressure
,
Turbines
,
Turbulence
,
Inflow
,
Simulation
,
Acoustics
,
Cascades (Fluid dynamics)
,
Compressible flow
The Effect of Tip Shroud Geometries on Last Turbine Stage Efficiency
GT 2018; V02BT41A006https://doi.org/10.1115/GT2018-75416
Topics:
Turbines
,
Damping
,
Blades
,
Design
,
Flow (Dynamics)
,
Resonance
,
Rotors
,
Boundary-value problems
,
Diffusers
,
Fins
Interaction Phenomena of High Frequency Pulsed Blowing in LP Turbine-Like Boundary Layers at High Speed Test Conditions
GT 2018; V02BT41A007https://doi.org/10.1115/GT2018-75475
Topics:
Boundary layers
,
Turbines
,
Flow (Dynamics)
,
Actuators
,
Flow control
,
Pressure
,
Suction
,
Flat plates
,
Flow separation
,
Mach number
Aerodynamic and Mechanical Analyses on Manufacturing Variations of a Turbine Blade Row
GT 2018; V02BT41A008https://doi.org/10.1115/GT2018-75536
Topics:
Manufacturing
,
Turbine blades
,
Hardware
,
Durability
,
Geometry
,
Inspection
,
Machining
,
Design
,
Solid models
,
Airfoils
Surface Roughness Impact on Secondary Flow and Losses in a Turbine Exhaust Casing
GT 2018; V02BT41A009https://doi.org/10.1115/GT2018-75541
Topics:
Exhaust systems
,
Flow (Dynamics)
,
Surface roughness
,
Turbines
,
Pressure
,
Probes
,
Reynolds number
,
Suction
,
Boundary layers
,
Computational fluid dynamics
Steady CFD Simulation of a High Pressure Turbine Rotor With Hub and Shroud Purge Flow
Wolfgang Sanz, Stefan Zerobin, Manfred Egger, Pascal Bader, Paul Pieringer, Emil Göttlich, Franz Heitmeir
GT 2018; V02BT41A010https://doi.org/10.1115/GT2018-75642
Topics:
Computational fluid dynamics
,
Flow (Dynamics)
,
High pressure (Physics)
,
Rotors
,
Simulation
,
Turbines
,
Vortices
,
Leakage
,
Vorticity
,
Boundary layers
Investigation of Thermal Effect on Bypass Transition on a High-Pressure Turbine Guide Vane
GT 2018; V02BT41A012https://doi.org/10.1115/GT2018-75676
Topics:
Guide vanes
,
High pressure (Physics)
,
Temperature effects
,
Turbines
,
Temperature
,
Heat flux
,
Mach number
,
Airfoils
,
Analog circuits
,
Chords (Trusses)
Using Turbulence Intensity and Reynolds Number to Predict Flow Separation on a Highly Loaded, Low-Pressure Gas Turbine Blade at Low Reynolds Numbers
GT 2018; V02BT41A015https://doi.org/10.1115/GT2018-75976
Topics:
Blades
,
Flow separation
,
Gas turbines
,
Pressure
,
Reynolds number
,
Turbulence
,
Flow (Dynamics)
,
Turbines
,
Temperature
,
Turbine blades
Aero Derivative Mechanical Drive Gas Turbines: The Design of Intermediate Pressure Turbines
Alberto Scotti Del Greco, Vittorio Michelassi, Stefano Francini, Daniele Di Benedetto, Mahendran Manoharan
GT 2018; V02BT41A016https://doi.org/10.1115/GT2018-76036
Topics:
Design
,
Gas turbines
,
Mechanical drives
,
Pressure
,
Turbines
,
Engines
,
Aircraft engines
,
Compressors
,
Flow (Dynamics)
,
Liquefied natural gas
Non-Axisymmetric Endwall Profiling of a Stator Row in the Presence of the Rotor in a High Pressure Turbine
GT 2018; V02BT41A017https://doi.org/10.1115/GT2018-76070
Topics:
High pressure (Physics)
,
Rotors
,
Stators
,
Turbines
,
Design
,
Flow (Dynamics)
,
Optimization
,
Artificial neural networks
,
Axial flow
,
Computer software
The Influence of Different Endwall Contouring Locations on the Secondary Flow Losses in a Highly Loaded Low Pressure Turbine
GT 2018; V02BT41A018https://doi.org/10.1115/GT2018-76159
Topics:
Flow (Dynamics)
,
Pressure
,
Turbines
,
Airfoils
,
Bubbles
,
Cascades (Fluid dynamics)
,
Separation (Technology)
,
Suction
Large Eddy Simulations of Separated Boundary Layer With Pressure Gradient and Heat Transfer
GT 2018; V02BT41A021https://doi.org/10.1115/GT2018-76338
Topics:
Boundary layers
,
Heat transfer
,
Large eddy simulation
,
Pressure gradient
,
Vortices
,
Pressure
,
Bubbles
,
Separation (Technology)
,
Suction
,
Turbine blades
Aerodynamic Measurements and Analysis in a First Stage Nozzle Guide Vane Passage With Combustor Liner Cooling, Slot Film Cooling and Endwall Contouring
GT 2018; V02BT41A022https://doi.org/10.1115/GT2018-76345
Topics:
Combustion chambers
,
Cooling
,
Film cooling
,
Nozzle guide vanes
,
Flow (Dynamics)
,
Coolants
,
Cascades (Fluid dynamics)
,
Vorticity
,
Turbines
,
Turbulence
An Experimental and Numerical Study of Tip-Leakage Flows in an Idealized Turbine Tip Gap at High Mach Numbers
GT 2018; V02BT41A023https://doi.org/10.1115/GT2018-76366
Topics:
Flow (Dynamics)
,
Leakage
,
Mach number
,
Turbines
,
Blades
,
Shock (Mechanics)
,
Clearances (Engineering)
,
Leakage flows
,
Organic Rankine cycle
,
Vortices
LES and RANS Analysis of the End-Wall Flow in a Linear LPT Cascade With Variable Inlet Conditions: Part II — Loss Generation
Michele Marconcini, Roberto Pacciani, Andrea Arnone, Vittorio Michelassi, Richard Pichler, Yaomin Zhao, Richard Sandberg
GT 2018; V02BT41A024https://doi.org/10.1115/GT2018-76450
Numerical Study of a Linear Cascade With Upstream Cavity Using Various Rim-Seal Geometries and Purge Rates
GT 2018; V02BT41A025https://doi.org/10.1115/GT2018-76615
Topics:
Cascades (Fluid dynamics)
,
Cavities
,
Flow (Dynamics)
,
Geometry
,
Blades
,
Clearances (Engineering)
,
Pressure
,
Annulus
,
Dampers
,
Gas turbines
Tip Leakage Flow Reduction of a Linear Turbine Cascade Using String-Type DBD Plasma Actuators
GT 2018; V02BT41A026https://doi.org/10.1115/GT2018-76680
Topics:
Actuators
,
Cascades (Fluid dynamics)
,
Leakage flows
,
Plasmas (Ionized gases)
,
String
,
Turbines
,
Blades
,
Electrodes
,
Reynolds number
,
Displacement
Shrouded CMC Rotor Blades for High Pressure Turbine Applications
GT 2018; V02BT41A028https://doi.org/10.1115/GT2018-76827
Topics:
Blades
,
Ceramic matrix composites
,
High pressure (Physics)
,
Rotors
,
Turbines
,
Stress
,
Pressure
,
Density
,
Clearances (Engineering)
,
Metals
Turbopump Booster Turbine Performance: Comparison Between Monophase and Multiphase Flows Using CFD
GT 2018; V02BT41A029https://doi.org/10.1115/GT2018-76879
Topics:
Computational fluid dynamics
,
Multiphase flow
,
Turbines
,
Cavitation
,
Simulation
,
Design
,
Engines
,
Propellants
,
Blades
,
Clearances (Engineering)
An Experimental Study of Using Vortex Generators As Tip Leakage Flow Interrupters in an Axial Flow Turbine Stage
GT 2018; V02BT41A030https://doi.org/10.1115/GT2018-76994
Topics:
Axial flow
,
Generators
,
Leakage flows
,
Turbines
,
Vortices
,
Leakage
,
Suction
,
Blades
,
Flow (Dynamics)
,
Turbine blades
Scaling Sealing Effectiveness in a Stator-Rotor Cavity for Differing Blade Spans
Reid A. Berdanier, Iván Monge-Concepción, Brian F. Knisely, Michael D. Barringer, Karen A. Thole, Eric A. Grover
GT 2018; V02BT41A031https://doi.org/10.1115/GT2018-77105
Topics:
Arches
,
Blades
,
Cavities
,
Rotors
,
Sealing (Process)
,
Stators
,
Flow (Dynamics)
,
Engines
,
Airfoils
,
Compressors
Implicit-LES Simulation of Variable-Speed Power Turbine Cascade for Low Free-Stream Turbulence Conditions
GT 2018; V02BT41A032https://doi.org/10.1115/GT2018-77120
Topics:
Cascades (Fluid dynamics)
,
Simulation
,
Turbines
,
Turbulence
,
Flow (Dynamics)
,
Blades
,
Pressure
,
Reynolds number
,
Design
,
Separation (Technology)
Redistribution of Total Temperature Through an Annular Turbine Nozzle Cascade
Joshua Szczudlak, Sara Rostami, Arman Mirhashemi, Scott Morris, Greg Sluyter, Kirk Gallier, Greg Laskowski, Jon Slepski
GT 2018; V02BT41A033https://doi.org/10.1115/GT2018-77281
Topics:
Cascades (Fluid dynamics)
,
Nozzles
,
Temperature
,
Turbines
,
Flow (Dynamics)
,
Pressure
,
Turbulence
,
Blades
,
Combustion chambers
,
Engineering simulation
Noise, Ducts, and Interactions
Study of Combustion Noise Generation in a Realistic Turbine Stage Configuration
GT 2018; V02BT43A001https://doi.org/10.1115/GT2018-75062
Topics:
Combustion
,
Noise (Sound)
,
Turbines
,
Temperature
,
Energy resources
,
Fluctuations (Physics)
,
Combustion chambers
,
Engines
,
Entropy
,
Inlet guide vanes
Compressive Sensing Approach for Aeroengine Fan Noise Mode Detection
GT 2018; V02BT43A002https://doi.org/10.1115/GT2018-75141
Topics:
Noise (Sound)
,
Sensors
,
Testing
,
Ducts
,
Flow (Dynamics)
,
Probability
,
Spin (Aerodynamics)
,
Spinning (Textile)
,
Test facilities
,
Wind tunnels
Beamforming and Compressive Sensing Mode Detection of Duct Acoustic Source by Sensor Array
GT 2018; V02BT43A004https://doi.org/10.1115/GT2018-75260
Topics:
Acoustics
,
Ducts
,
Sensors
,
Testing
,
Noise (Sound)
,
Design
,
Commercial air transport
,
Computer simulation
,
Electromagnetic scattering
,
Jets
Effects of Cavity Purge Flow on Intermediate Turbine Duct Flowfield
GT 2018; V02BT43A005https://doi.org/10.1115/GT2018-76324
Topics:
Cavities
,
Ducts
,
Flow (Dynamics)
,
Turbines
,
Engines
,
Design
,
Pressure
,
Blades
,
Diffusion (Physics)
,
Experimental methods
Numerical Flow Field Analysis in a Highly Bent Intake Duct
GT 2018; V02BT43A007https://doi.org/10.1115/GT2018-76633
Topics:
Ducts
,
Flow (Dynamics)
,
Engines
,
Flow separation
,
Shapes
,
Vortices
,
Aerodynamics
,
Aircraft
,
Compressors
,
Computational fluid dynamics
Numerical and Experimental Study on Bleed Impact on Intermediate Compressor Duct Performance
GT 2018; V02BT43A008https://doi.org/10.1115/GT2018-76649
Topics:
Compressors
,
Ducts
,
Pressure
,
Computational fluid dynamics
,
Engineering simulation
,
Flow (Dynamics)
,
Pipes
,
Simulation
,
Aerospace industry
,
Aircraft engines
APU-Noise Reduction by Novel Muffler Concepts
GT 2018; V02BT43A009https://doi.org/10.1115/GT2018-76762
Topics:
Noise (Sound)
,
Silencers
,
Cavities
,
Design
,
Flow (Dynamics)
,
Absorption
,
Acoustics
,
Damping
,
Ducts
,
Microphones
Impact of Impeller Casing Treatment on the Acoustics of a Small High Speed Centrifugal Compressor
GT 2018; V02BT43A010https://doi.org/10.1115/GT2018-76815
Topics:
Acoustics
,
Compressors
,
Impellers
,
Blades
,
Design
,
Flow (Dynamics)
,
Aerodynamic noise
,
Delays
,
Dipoles (Electromagnetism)
,
Ducts
Continuous-Scan Phased Array Measurement Methods for Turbofan Engine Acoustic Testing
GT 2018; V02BT43A012https://doi.org/10.1115/GT2018-77033
Topics:
Acoustics
,
Engines
,
Testing
,
Turbofans
,
Sensors
,
Algorithms
,
Noise (Sound)
,
Data acquisition systems
,
Delays
,
Density
Radial Turbomachinery Aerodynamics
Variable Geometry Turbine Nozzle Design for High Expansion Ratios
GT 2018; V02BT44A001https://doi.org/10.1115/GT2018-75013
Topics:
Design
,
Geometry
,
Nozzles
,
Turbines
,
Shock (Mechanics)
,
Engines
,
Flow (Dynamics)
,
High cycle fatigue
,
Optimization
,
Shock waves
Design of a Transonic High Flow Coefficient Centrifugal Compressor by Using Advanced Design Methods
GT 2018; V02BT44A002https://doi.org/10.1115/GT2018-75024
Topics:
Compressors
,
Design
,
Design methodology
,
Flow (Dynamics)
,
Blades
,
Diesel
,
Turbochargers
,
Diffusers
,
Computational fluid dynamics
,
Design engineering
A Numerical and Experimental Investigation of the Impact of Mixed Flow Turbine Inlet Cone Angle and Inlet Blade Angle
GT 2018; V02BT44A003https://doi.org/10.1115/GT2018-75096
Topics:
Blades
,
Flow (Dynamics)
,
Turbines
,
Rotors
,
Design
,
Computer simulation
,
Geometry
,
Transients (Dynamics)
,
Automotive engines
,
Computational fluid dynamics
The Interaction Between Inlet Guide Vanes and the Impeller Recirculating Flow in a Centrifugal Compressor and the Resulting Impact on Flow Range
GT 2018; V02BT44A004https://doi.org/10.1115/GT2018-75097
Topics:
Compressors
,
Flow (Dynamics)
,
Impellers
,
Inlet guide vanes
,
Surges
,
Inflow
,
Computational fluid dynamics
,
Diffusers
,
Engineering simulation
,
Pressure
Influences of Tip Leakage Flows Discharged From Main and Splitter Blades on Flow Field in Transonic Centrifugal Compressor Stage
GT 2018; V02BT44A006https://doi.org/10.1115/GT2018-75345
Topics:
Blades
,
Compressors
,
Flow (Dynamics)
,
Leakage flows
,
Vortices
,
Clearances (Engineering)
,
Leakage
,
Diffusers
,
Impellers
,
Suction
Experimental Application of a Boundary Layer Control Strategy in a Radial Vaned Diffuser
GT 2018; V02BT44A007https://doi.org/10.1115/GT2018-75365
Topics:
Boundary layers
,
Diffusers
,
Suction
,
Compressors
,
Design
,
Surges
,
Engines
Axial Turbine Design for a Twin-Turbine Heavy-Duty Turbocharger Concept
GT 2018; V02BT44A008https://doi.org/10.1115/GT2018-75453
Topics:
Design
,
Turbines
,
Turbochargers
,
Engines
,
Flow (Dynamics)
,
Simulation
,
Durability
,
Geometry
,
Blades
,
Computational fluid dynamics
The Impact of Inlet Distortion and Reduced Frequency on the Performance of Centrifugal Compressors
GT 2018; V02BT44A009https://doi.org/10.1115/GT2018-75494
Topics:
Compressors
,
Flow (Dynamics)
,
Design
,
Impellers
,
Liquefied natural gas
,
Aerodynamics
,
Blades
,
Databases
,
Theoretical analysis
,
Turbines
Performance Characterization of a Twin Scroll Volute for Turbocharging Applications
GT 2018; V02BT44A010https://doi.org/10.1115/GT2018-75522
Topics:
Computational fluid dynamics
,
Computer simulation
,
Databases
,
Design
,
Engines
,
Modeling
,
Optimization
,
Performance characterization
,
Rotors
,
Turbines
Design Point Efficiency of Radial Turbines
GT 2018; V02BT44A011https://doi.org/10.1115/GT2018-75533
Topics:
Design
,
Turbines
,
Flow (Dynamics)
,
Mach number
,
Blades
,
Databases
,
Wheels
,
Cavities
,
Computational fluid dynamics
,
Geometry
3D Computational Analysis of a Compressor for Heavy Duty Truck Engine Turbochargers
Matthias Abel, Peter Newton, Ricardo F. Martinez-Botas, Michael Wöhr, Markus Müller, Johannes Leweux
GT 2018; V02BT44A012https://doi.org/10.1115/GT2018-75688
Topics:
Compressors
,
Engines
,
Trucks
,
Turbochargers
,
Computational fluid dynamics
,
Diffusers
,
Pressure
,
Steady state
,
Flow (Dynamics)
,
Fuel consumption
Investigation on the Stall Inception Circumferential Position and Stall Process Behavior in a Centrifugal Compressor With Volute
GT 2018; V02BT44A013https://doi.org/10.1115/GT2018-75765
Topics:
Compressors
,
Stall inception
,
Pressure
,
Impellers
,
Vortices
,
Blades
,
Engineering simulation
,
Flow (Dynamics)
,
Simulation
,
Clearances (Engineering)
A Study on Matching Between Centrifugal Compressor Impeller and Low Solidity Diffuser and its Extension to Vaneless Diffuser
GT 2018; V02BT44A014https://doi.org/10.1115/GT2018-75902
Topics:
Compressor impellers
,
Diffusers
,
Vaneless diffusers
,
Flow (Dynamics)
,
High pressure (Physics)
,
Pressure
,
Surges
,
Compressors
,
Design
,
Flow visualization
1D and 3D-Design Strategies for Pressure Slope Optimization of High-Flow Transonic Centrifugal Compressor Impellers
GT 2018; V02BT44A016https://doi.org/10.1115/GT2018-76154
Topics:
Compressor impellers
,
Design
,
Flow (Dynamics)
,
Optimization
,
Pressure
,
Impellers
,
Computational fluid dynamics
,
Compressors
,
Databases
,
Blades
Characterization and Impact of Secondary Flows in a Discrete Passage Centrifugal Compressor Diffuser
GT 2018; V02BT44A017https://doi.org/10.1115/GT2018-76231
Topics:
Compressors
,
Diffusers
,
Flow (Dynamics)
,
Vortices
,
Separation (Technology)
,
Pressure
,
Boundary layers
,
Suction
,
Computation
,
Flow separation
Measurement of Unsteady Pressure Field in a Turbocharger Compressor Using Pressure-Sensitive Paint
Takaaki Kitamura, Masaharu Kameda, Wataru Watanabe, Kazutaka Horimoto, Kenta Akimoto, Akihito Akahori
GT 2018; V02BT44A018https://doi.org/10.1115/GT2018-76267
Topics:
Compressors
,
Paints
,
Pressure
,
Turbochargers
,
Impellers
,
Diffusers
,
Flow (Dynamics)
,
Signals
,
Temperature
,
Blades
Optimization of Fuel Two-Stage Screw Centrifugal Pump of Rocket Powerful Turbopump Unit
GT 2018; V02BT44A020https://doi.org/10.1115/GT2018-76400
Topics:
Centrifugal pumps
,
Fuels
,
Optimization
,
Rockets
,
Screws
,
Pumps
,
Ducts
,
Pressure
,
Flow (Dynamics)
,
Geometry
Critical Suction Peformance Test of Turbopump Assembly for a Liquid-Propellant Rocket Engine
GT 2018; V02BT44A021https://doi.org/10.1115/GT2018-76430
Topics:
Manufacturing
,
Propellants
,
Rocket engines
,
Suction
,
Pumps
,
Cavitation
,
Pressure
,
Water
,
Design
,
Nitrogen
Effect of Impeller Outlet Flow Affected by Casing Treatment on Rotating Stall in Vane-Less Diffuser in Centrifugal Turbomachinery
GT 2018; V02BT44A022https://doi.org/10.1115/GT2018-76461
Topics:
Diffusers
,
Flow (Dynamics)
,
Impellers
,
Turbomachinery
,
Pressure
,
Compressors
,
Vibration
,
Bearings
,
Blades
,
Fluctuations (Physics)
Non-Uniform Tip Clearance Effects on Turbocharger Compressor Performance
GT 2018; V02BT44A023https://doi.org/10.1115/GT2018-76837
Topics:
Clearances (Engineering)
,
Compressors
,
Turbochargers
,
Diffusers
,
Flow (Dynamics)
,
Impellers
,
Experimental design
,
Design
,
Diffusion (Physics)
,
Fluid dynamics
Unsteady Responses of the Impeller of a Centrifugal Compressor Exposed to Pulsating Backpressure
GT 2018; V02BT44A024https://doi.org/10.1115/GT2018-76851
Topics:
Compressors
,
Impellers
,
Flow (Dynamics)
,
Engines
,
Simulation
,
Turbochargers
,
Airfoils
,
Boundary-value problems
,
Computational fluid dynamics
,
Cylinders
Analytical and Experimental Results of a Novel Single-Stage Centrifugal Compressor With Economizer Injection
GT 2018; V02BT44A026https://doi.org/10.1115/GT2018-76967
Topics:
Compressors
,
Cycles
,
Design
,
HVAC equipment
,
Water
,
Air conditioning
,
Computational fluid dynamics
,
Condensers (steam plant)
,
Diffusers
,
Energy consumption
Investigation Into the Impact of Span-Wise Flow Distribution on the Performance of a Mixed Flow Turbine
GT 2018; V02BT44A027https://doi.org/10.1115/GT2018-76992
Topics:
Flow (Dynamics)
,
Turbines
,
Blades
,
Engineering simulation
,
Engines
,
Fibers
,
Simulation
,
Turbochargers
,
Automotive industry
,
Axial flow
Assessment of Flow Control Strategies for Improving Centrifugal Compressor Efficiency
GT 2018; V02BT44A029https://doi.org/10.1115/GT2018-77022
Topics:
Compressors
,
Flow control
,
Diffusers
,
Flow (Dynamics)
,
Impellers
,
Pipes
,
Aircraft engines
,
Axial flow
,
Computational fluid dynamics
,
Engineering simulation
Large Eddy Simulations in a Transonic Centrifugal Compressor
Jérôme Dombard, Florent Duchaine, Laurent Gicquel, Gabriel Staffelbach, Nicolas Buffaz, Isabelle Trébinjac
GT 2018; V02BT44A030https://doi.org/10.1115/GT2018-77023
Topics:
Compressors
,
Large eddy simulation
,
Rotors
,
Surges
,
Blades
,
Diffusers
,
Leakage
,
Boundary layers
,
Computation
,
Flow (Dynamics)