Volumes | Turbo Expo: Power for Land, Sea, and Air | American Society of Mechanical Engineers Digital Collection

Topics: Rotors , Stability , Steam turbines , Bearings , Dynamic response , Stiffness , Computational fluid dynamics , Computer simulation , Dimensions , Dynamic models

Damping and Inertia Coefficients for Two End Sealed Squeeze Film Dampers With a Central Groove: Measurements and Predictions

Luis San Andrés, Sanjeev Seshagiri

GT 2013; V07BT30A005doi:https://doi.org/10.1115/GT2013-94273

Abstract

View Article

PDF

Topics: Dampers , Damping , Inertia (Mechanics) , Flow (Dynamics) , Stress , Lubricants , Piston rings , Rotors , Clearances (Engineering) , Aircraft engines

Approximate Analytical Model for Oil Film Force of Finite Length Squeeze Film Damper Under Low Reynolds Number

Yongliang Wang, Yu Gao, Jingjun Zhong, Ling Yang, Huawei Lu

GT 2013; V07BT30A006doi:https://doi.org/10.1115/GT2013-94296

Abstract

View Article

PDF

Topics: Dampers , Reynolds number

Measurements of Rotordynamic Response and Temperatures in a Rotor Supported on Metal Mesh Foil Bearings

Thomas Abraham Chirathadam, Luis San Andrés

GT 2013; V07BT30A007doi:https://doi.org/10.1115/GT2013-94321

Abstract

View Article

PDF

Topics: Foil bearings , Metals , Rotors , Temperature , Bearings , Air flow , Damping , Dynamic response , Energy generation , Gas bearings

Leakage and Rotordynamic Coefficients of Brush Seals With Zero Cold Clearance Used in an Arrangement With Labyrinth Fins

Manuel Gaszner, Alexander O. Pugachev, Christos Georgakis, Paul Cooper

GT 2013; V07BT30A008doi:https://doi.org/10.1115/GT2013-94342

Abstract

View Article

PDF

Topics: Clearances (Engineering) , Fins , Leakage , Stiffness , Sealing (Process) , Damping , Computational fluid dynamics , Whirls , Actuators , Gas flow

CFD Investigation on the Rotordynamic Characteristics of Shroud Leakage Flow in High Pressure Steam Turbine

Noriyo Nishijima, Akira Endo, Kazuyuki Yamaguchi

GT 2013; V07BT30A009doi:https://doi.org/10.1115/GT2013-94357

Abstract

View Article

PDF

Topics: Computational fluid dynamics , High pressure (Physics) , Leakage flows , Steam turbines , Flow (Dynamics) , Rotors , Turbines , Cascades (Fluid dynamics) , Fins , Guide vanes

Investigation of Flow and Mixing Phenomena in an Oil Supply Pocket of a Heavy Duty Gas Turbine Journal Bearing

Stephan Uhkoetter, Stefan aus der Wiesche, Franz Joos

GT 2013; V07BT30A010doi:https://doi.org/10.1115/GT2013-94364

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Gas turbines , Journal bearings , Computational fluid dynamics , Eddies (Fluid dynamics) , Shear (Mechanics) , Bearings , Engineering simulation , Flow visualization , Geometry

Efficient Techniques for the Computation of the Nonlinear Dynamics of a Foil-Air Bearing Rotor System

Hai Pham, Philip Bonello

GT 2013; V07BT30A011doi:https://doi.org/10.1115/GT2013-94389

Abstract

View Article

PDF

Topics: Computation , Foil bearings , Nonlinear dynamics , Rotors , Bearings , Dynamic response , Dynamics (Mechanics) , Errors , Turbomachinery

A Novel Weldless Foils-Case Attachment for Gas Foil Bearings

Marcelo H. Di Liscia, Jose A. Matute, Gabriela S. Diaz, Sergio E. Diaz

GT 2013; V07BT30A012doi:https://doi.org/10.1115/GT2013-94402

Abstract

View Article

PDF

Topics: Foil bearings , Bearings , Stiffness , Cycles , Damage , Failure , Fluids , Machinery , Manufacturing , Pressure

The Role of Pivot Stiffness on the Dynamic Force Coefficients of Tilting Pad Journal Bearings

Luis San Andrés, Yujiao Tao

GT 2013; V07BT30A013doi:https://doi.org/10.1115/GT2013-94403

Abstract

View Article

PDF

Topics: Journal bearings , Stiffness , Bearings , Stress , Fluid films , Damping , Excitation , Manufacturing , Algorithms , Bridges (Structures)

Partial Arc Steam Admission Optimization in Order to Reduce Vibration of Steam Turbine With Tilting-Pad Journal Bearings

Alexander Nekrasov

GT 2013; V07BT30A014doi:https://doi.org/10.1115/GT2013-94429

Abstract

View Article

PDF

Topics: Journal bearings , Optimization , Steam , Steam turbines , Vibration , Bearings , Turbines , Valves , Flow (Dynamics) , Stress

An Improved Catcher Bearing Model and an Explanation of the Forward Whirl/Whip Phenomenon Observed in Active Magnetic Bearing Transient Drop Experiments

Jason Wilkes, Giuseppe Vannini, Jeff Moore, David Ransom

GT 2013; V07BT30A015doi:https://doi.org/10.1115/GT2013-94594

Abstract

View Article

PDF

Topics: Bearings , Magnetic bearings , Transients (Dynamics) , Whirls , Rotors , Engineering simulation , Friction , Simulation , Compressors , Finite element analysis

Two Phase CFD Modelling of a Spiral Bevel Gear Using Particle Injections and a Wall Film Model

A. Turner, H. P. Morvan, K. Simmons

GT 2013; V07BT30A016doi:https://doi.org/10.1115/GT2013-94735

Abstract

View Article

PDF

Topics: Computational fluid dynamics , Modeling , Particulate matter , Spiral bevel gears , Drops , Momentum , Flow (Dynamics) , Gears , Geometry , Computation

A New Approach for the Stability Analysis of Rotors Supported by Gas Bearings

Mohamed Amine Hassini, Mihai Arghir

GT 2013; V07BT30A017doi:https://doi.org/10.1115/GT2013-94802

Abstract

View Article

PDF

Topics: Gas bearings , Rotors , Stability , Poles (Building) , Transfer functions , Eigenvalues , Bearings , Differential equations , Dynamic models , Excitation

Elastomer O-Rings as Centering Spring in Squeeze Film Dampers: Application to Turbochargers

Saeid Dousti, Jason A. Kaplan, Feng He, Paul E. Allaire

GT 2013; V07BT30A018doi:https://doi.org/10.1115/GT2013-94923

Abstract

View Article

PDF

Topics: Dampers , Elastomers , Seals , Springs , Turbochargers , Damping , Fluid-dynamic forces , Rotors , Stress , Transients (Dynamics)

Measurement and Prediction of the Static Operating Conditions of a Large Turbine Tilting-Pad Bearing Under High Circumferential Speeds and Heavy Loads

Thomas Hagemann, Sebastian Kukla, Hubert Schwarze

GT 2013; V07BT30A019doi:https://doi.org/10.1115/GT2013-95004

Abstract

View Article

PDF

Topics: Bearings , Stress , Turbines , Temperature , Pressure , Clearances (Engineering) , Computer software , Deformation , Film thickness , Flow (Dynamics)

Measurement and Prediction of the Dynamic Characteristics of a Large Turbine Tilting-Pad Bearing Under High Circumferential Speeds

Sebastian Kukla, Thomas Hagemann, Hubert Schwarze

GT 2013; V07BT30A020doi:https://doi.org/10.1115/GT2013-95074

Abstract

View Article

PDF

Topics: Bearings , Turbines , Stress , Theoretical analysis , Clearances (Engineering) , Elasticity , Fluid films , Fourier analysis , Generators , Pressure

Practical Controller Design for Rotors on Magnetic Bearings by Means of an Efficient Simulation Tool

Joachim Schmied, Alexander Kosenkov

GT 2013; V07BT30A021doi:https://doi.org/10.1115/GT2013-95075

Abstract

View Article

PDF

Topics: Control equipment , Design , Magnetic bearings , Rotors , Simulation , Bearings , Filters , Hardware , Optimization , Poles (Building)

On the Effect of Pad Clearance and Preload Manufacturing Tolerances on Tilting Pad Bearings Rotordynamic Coefficients

Jose L. Gomez, Saira Pineda, Sergio E. Diaz

GT 2013; V07BT30A022doi:https://doi.org/10.1115/GT2013-95214

Abstract

View Article

PDF

Topics: Bearings , Clearances (Engineering) , Manufacturing , Stress , Finite element methods , Rotors , Turbomachinery

Enhanced Groove Geometry for Herringbone Grooved Journal Bearings

J. Schiffmann

GT 2013; V07BT30A023doi:https://doi.org/10.1115/GT2013-95464

Abstract

View Article

PDF

Topics: Geometry , Journal bearings , Stability , Bearings , Clearances (Engineering) , Manufacturing , Rotors , Compressibility , Design , Gas bearings

A Numerical Study of Squeeze Film Dampers

Praneetha Boppa, Gerald L. Morrison, Aarthi Sekaran

GT 2013; V07BT30A024doi:https://doi.org/10.1115/GT2013-95547

Abstract

View Article

PDF

Topics: Dampers , Rotors , Steady state , Bearings , Computer simulation , Damping , Dynamic stability , Turbomachinery , Vibration , Whirls

Actively Lubricated Bearings Applied as Calibrated Shakers to Aid Parameter Identification in Rotordynamics

Ilmar Ferreira Santos, Alejandro Cerda Varela

GT 2013; V07BT30A025doi:https://doi.org/10.1115/GT2013-95674

Abstract

View Article

PDF

Topics: Bearings , Rotordynamics , Fluid films , Pressure , Rotors , Servomechanisms , Valves , Lubrication , Signals , Experimental characterization

Experimental Identification of Force Coefficients of Large Hybrid Air Foil Bearings

Yu Ping Wang, Daejong Kim

GT 2013; V07BT30A026doi:https://doi.org/10.1115/GT2013-95765

Abstract

View Article

PDF

Topics: Foil bearings , Impulse (Physics)

Rotor Drop Simulations and Validation With Focus on Internal Contact Mechanisms of Hybrid Ball Bearings

Jens Anders, Peter Leslie, Lars-Erik Stacke

GT 2013; V07BT30A027doi:https://doi.org/10.1115/GT2013-95816

Abstract

View Article

PDF

Topics: Ball bearings , Rotors , Simulation , Bearings , Machinery , Magnetic bearings , Testing , Transients (Dynamics) , Computers , Deformation

Hydrodynamic Analysis of Hydrostatic Bearings With Runner Misalignment and Pad Damage

Timothy Dimond, David Barnes

GT 2013; V07BT30A028doi:https://doi.org/10.1115/GT2013-95951

Abstract

View Article

PDF

Topics: Bearings , Damage , Hydrostatics , Film thickness , Flow (Dynamics) , Pressure , Stress , Thrust bearings , Finite element analysis , Rotors

Performance Characteristics of Metal Mesh Foil Bearings: Predictions vs. Measurements

Luis San Andrés, Thomas Abraham Chirathadam

GT 2013; V07BT30A029doi:https://doi.org/10.1115/GT2013-95975

Abstract

View Article

PDF

Topics: Foil bearings , Metals , Performance characterization , Bearings , Damping , Machinery , Stiffness , Stress , Design , Drag (Fluid dynamics)

Structural Mechanics and Vibration

Mistuning Modeling and its Validation for Small Turbine Wheels

David Hemberger, Dietmar Filsinger, Hans-Jörg Bauer

GT 2013; V07BT31A001doi:https://doi.org/10.1115/GT2013-94019

Abstract

View Article

PDF

Topics: Modeling , Turbines , Wheels , Blades , Finite element model , Compressors , Computer simulation , Degrees of freedom , Dimensions , Electromagnetic scattering

Study on Transient Vibration of Mistuned Bladed Disk Passing Through Resonance

Yasutomo Kaneko

GT 2013; V07BT31A002doi:https://doi.org/10.1115/GT2013-94052

Abstract

View Article

PDF

Topics: Disks , Resonance , Transients (Dynamics) , Vibration , Blades , Engines , Vibration analysis , Damping , Frequency response , Modal analysis

Forced Response Analysis of a Mistuned Compressor Blisk

Bernd Beirow, Arnold Kühhorn, Thomas Giersch, Jens Nipkau

GT 2013; V07BT31A003doi:https://doi.org/10.1115/GT2013-94142

Abstract

View Article

PDF

Topics: Blades , Compressors , Damping , Design , Disks , Displacement , Engines , Flow (Dynamics) , Fluid structure interaction , Genetic algorithms

Exact Solution of Radial Displacement and Stress of Rotating Elastic Interference Fits

Sheng Feng, Haipeng Geng, Baisong Yang, Lie Yu, Lihua Yang, Jian Zhou, Shiquan Zhao

GT 2013; V07BT31A004doi:https://doi.org/10.1115/GT2013-94270

Abstract

View Article

PDF

Topics: Displacement , Press fits , Stress , Temperature , Couplings , Hoop stress , Numerical analysis , Shear stress

Geometric Mistuning Reduced Order Models for Integrally Bladed Rotors With Mistuned Disk-Blade Boundaries

Joseph A. Beck, Jeffrey M. Brown, Charles J. Cross, Joseph C. Slater

GT 2013; V07BT31A005doi:https://doi.org/10.1115/GT2013-94361

Abstract

View Article

PDF

Topics: Blades , Disks , Rotors , Finite element model , Approximation , Degrees of freedom

Modified Modal Domain Analysis of a Bladed Rotor Using Coordinate Measurement Machine Data on Geometric Mistuning

Vinod Vishwakarma, Alok Sinha, Yasharth Bhartiya, Jeffery M. Brown

GT 2013; V07BT31A006doi:https://doi.org/10.1115/GT2013-94393

Abstract

View Article

PDF

Topics: Machinery , Rotors , Mode shapes , Blades , Coordinate measuring machines , Modeling , Principal component analysis

Modeling of Abradable Coating Removal in Aircraft Engines Through Delay Differential Equations

Nicolas Salvat, Alain Batailly, Mathias Legrand

GT 2013; V07BT31A007doi:https://doi.org/10.1115/GT2013-94400

Abstract

View Article

PDF

Topics: Aircraft engines , Coating processes , Coatings , Delay differential equations , Modeling , Blades , Chatter , Turbomachinery , Cutting , Differential equations

Structural Dynamic Analysis Approach Used in a GE Heavy Duty Gas Turbine Combustor for MTBM Enhancement

Bihari lal Jangid, Michele Provenzale, Eugenio Del Puglia

GT 2013; V07BT31A008doi:https://doi.org/10.1115/GT2013-94447

Abstract

View Article

PDF

Topics: Combustion chambers , Gas turbines , Structural dynamics , Hardware , Combustion , Dynamics (Mechanics) , Manufacturing , Pressure , Rotors , Stress

Investigation of Rotor-Casing Interactions in the Centrifugal Compressor of a Helicopter Engine

Markus B. Meingast, Alain Batailly, Mathias Legrand, Jean-Philippe Ousty

GT 2013; V07BT31A009doi:https://doi.org/10.1115/GT2013-94461

Abstract

View Article

PDF

Topics: Compressors , Engines , Rotors , Blades , Computer simulation , Design , Deformation , Disks , Engineering simulation , Geometry

Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks With Shroud Contact

Malte Krack, Lars Panning-von Scheidt, Jörg Wallaschek, Christian Siewert, Andreas Hartung

GT 2013; V07BT31A010doi:https://doi.org/10.1115/GT2013-94560

Abstract

View Article

PDF

Topics: Disks , Modal analysis , Modeling , Damping , Design , Flutter (Aerodynamics) , Limit cycles , Oscillations , Resonance , Algebra

Excitation of Nodal Diameter Mode-Shapes of a Stator Ring of a Turbojet Engine Using a Limited Number of Excitation Sources

Florence Nyssen, Jean-Claude Golinval, Régis Viguié, Daniel Simon

GT 2013; V07BT31A011doi:https://doi.org/10.1115/GT2013-94779

Abstract

View Article

PDF

Topics: Engines , Excitation , Mode shapes , Stators , Turbojets , Calibration , Gages , Strain gages , Compressors , Design engineering

Full Rotortrain Modelling Approach for Assessment of Dynamic Stresses on Rotor and Blades due to Torsional Disturbances

Igor Tsypkaykin, Rudolf Kellerer

GT 2013; V07BT31A012doi:https://doi.org/10.1115/GT2013-94855

Abstract

View Article

PDF

Topics: Blades , Modeling , Rotors , Stress , Generators , Compressors , Excitation , Finite element model , Gas turbines , Resonance

Validation of FE Simulated Structural Dynamic Behaviour of Heavy Duty Gas Turbines: A Case Study

Diego Ugel, Alastair Clark, Eric Knopf

GT 2013; V07BT31A013doi:https://doi.org/10.1115/GT2013-94873

Abstract

View Article

PDF

Topics: Gas turbines , Structural dynamics , Engines , Testing , Bearings , Design , Dynamics (Mechanics) , Engineering simulation , Hammers , Manufacturing

Implementation of Speed Variation in the Structural Dynamic Assessment of Turbomachinery Flow Path Components

Andrew M. Brown, R. Benjamin Davis, Michael K. DeHaye

GT 2013; V07BT31A014doi:https://doi.org/10.1115/GT2013-94890

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Structural dynamics , Turbomachinery , Resonance , Design , Excitation , Damage , High cycle fatigue , Rotors , Simulation

One-Piece Flow Blade Tuning Process

Pinlian Han, Tiefeng Chen, Yesheng Liu

GT 2013; V07BT31A015doi:https://doi.org/10.1115/GT2013-95455

Abstract

View Article

PDF

Topics: Blades , Flow (Dynamics) , Design , Engineers , Aircraft engines , Compressors , Concurrent engineering , Engineering design processes , Engineering disciplines , Fans

Finite-Element Modelling of an Experimental Mistuned Bladed Disk and Experimental Validation

Jean de Cazenove, Scott Cogan, Moustapha Mbaye

GT 2013; V07BT31A016doi:https://doi.org/10.1115/GT2013-95985

Abstract

View Article

PDF

Topics: Disks , Finite element analysis , Modeling , Blades , Finite element model , Computer simulation , Machining , Rotors , Vacuum , Wear

Aerodynamic Excitation and Damping (With Turbomachinery)

Flutter Amplitude Saturation by Nonlinear Friction Forces: An Asymptotic Approach

C. Martel, R. Corral

GT 2013; V07BT33A001doi:https://doi.org/10.1115/GT2013-94068

Abstract

View Article

PDF

Topics: Flutter (Aerodynamics) , Friction , Traveling waves , Computation , Dynamics (Mechanics) , Oscillations , Vibration , Aerodynamics , Disks , Engineering simulation

Unsteady Vibration of a Gas Turbine Compressor Blade at Subsonic Near-Stall Conditions

Kazuyuki Yamaguchi, Yasuo Takahashi

GT 2013; V07BT33A002doi:https://doi.org/10.1115/GT2013-94247

Abstract

View Article

PDF

Topics: Blades , Compressors , Gas turbines , Vibration , Damping , Pressure , Stress , Mach number , Modal analysis , Cascades (Fluid dynamics)

Flutter Prediction of a Transonic Fan With Travelling Wave Using Fully Coupled Fluid/Structure Interaction

Hong-Sik Im, Ge-Cheng Zha

GT 2013; V07BT33A003doi:https://doi.org/10.1115/GT2013-94341

Abstract

View Article

PDF

Topics: Fluid structure interaction , Flutter (Aerodynamics) , Traveling waves , Blades , Shock (Mechanics) , Engineering simulation , Simulation , Annulus , Boundary-value problems , Chords (Trusses)

Flutter Susceptibility Approximation via Curve Fitting and MAC-Analysis in an Automated Optimization Design Process

Michael Blocher, Anne-Laure Aulich

GT 2013; V07BT33A004doi:https://doi.org/10.1115/GT2013-94577

Abstract

View Article

PDF

Topics: Approximation , Curve fitting , Design , Flutter (Aerodynamics) , Modal assurance criterion , Optimization , Damping , Algorithms , Aerospace industry , Blades

A Fluid-Structure Coupling Method for Rotor Blade Unrunning Design

Hui Yang, Yun Zheng

GT 2013; V07BT33A005doi:https://doi.org/10.1115/GT2013-94653

Abstract

View Article

PDF

Topics: Blades , Design , Fluids , Rotors , Shapes , Computational fluid dynamics , Deflection , Finite element analysis , Structural dynamics , Arches

Aeroelastic Investigation of a Transonic Research Compressor

S. Leichtfuß, F. Holzinger, C. Brandstetter, F. Wartzek, H. P. Schiffer

GT 2013; V07BT33A006doi:https://doi.org/10.1115/GT2013-94730

Abstract

View Article

PDF

Topics: Blades , Compressors , Flutter (Aerodynamics) , Rotors

Prediction of High-Frequency Blade Vibration Amplitudes in a Radial Inflow Turbine With Nozzle Guide Vanes

Martin Schwitzke, Achmed Schulz, Hans-Jörg Bauer

GT 2013; V07BT33A007doi:https://doi.org/10.1115/GT2013-94761

Abstract

View Article

PDF

Topics: Blades , Inflow , Nozzle guide vanes , Turbines , Vibration , Damping , Excitation , Resonance , Boundary-value problems , Impellers

Physics of Vibrating Airfoils at Low Reduced Frequency

Almudena Vega, Roque Corral

GT 2013; V07BT33A008doi:https://doi.org/10.1115/GT2013-94906

Abstract

View Article

PDF

Topics: Airfoils , Physics , Mach number , Cycles , Pressure , Torsion , Turbines , Acoustics , Aerodynamics , Approximation

Investigation of Efficient CFD Methods for the Prediction of Blade Damping

Robin Elder, Ian Woods, Sunil Patil, William Holmes, Robin Steed, Brad Hutchinson

GT 2013; V07BT33A009doi:https://doi.org/10.1115/GT2013-95005

Abstract

View Article

PDF

Topics: Blades , Computational fluid dynamics , Damping , Fourier transforms , Simulation , Compressors , Computational methods , Deformation , Design , Fluid dynamics

Regeneration-Induced Forced Response in Axial Turbines

Jens Aschenbruck, Christopher E. Meinzer, Linus Pohle, Lars Panning-von Scheidt, Joerg R. Seume

GT 2013; V07BT33A010doi:https://doi.org/10.1115/GT2013-95431

Abstract

View Article

PDF

Topics: Turbines , Turbine blades , Excitation , Blades , Fluid structure interaction , Modal analysis , Nozzles , Rotors , Stators , Structural dynamics

Excited Blade Vibration for Aeroelastic Investigations of a Rotating Blisk Using Piezo-Electric Macro Fiber Composites

Joachim Belz, Markus May, Jan Siemann, Joerg R. Seume, Christian Voigt, Heiko Böhmer, Björn Grüber

GT 2013; V07BT33A011doi:https://doi.org/10.1115/GT2013-95735

Abstract

View Article

PDF

Topics: Blades , Composite materials , Fibers , Vibration , Compressors , Excitation , Mode shapes , Cascades (Fluid dynamics) , Control systems , Damping

A van der Pol Based Reduced-Order Model for Non-Synchronous Vibration (NSV) in Turbomachinery

Stephen T. Clark, Robert E. Kielb, Kenneth C. Hall

GT 2013; V07BT33A012doi:https://doi.org/10.1115/GT2013-95741

Abstract

View Article

PDF

Topics: Turbomachinery , Vibration , Design , Engineers , Computational fluid dynamics , Fluids , Limit cycles , Locks (Waterways) , Oscillations , Principal component analysis

Estimation of Burner Can-Induced Excitation Levels in an Industrial Gas Turbine

Maria A. Mayorca, Ronnie Bladh, Utkudeniz Ozturk

GT 2013; V07BT33A013doi:https://doi.org/10.1115/GT2013-95849

Abstract

View Article

PDF

Topics: Excitation , Industrial gases , Turbines , Blades , Flow (Dynamics) , Rotors , Combustion chambers , Compressors , Engineering simulation , Fatigue limit

The Development of an Air Injection System for the Forced Response Testing of Axial Compressors

E. Wegman, G. Snedden, S. J. van der Spuy, F. Holzinger, H. P. Schiffer, H. Mårtensson, J. Őstlund

GT 2013; V07BT33A014doi:https://doi.org/10.1115/GT2013-96011

Abstract

View Article

PDF

Topics: Compressors , Testing , Excitation systems , Blades , Control equipment , Ejectors , Flutter (Aerodynamics) , Rotors , Servomotors , Construction

All Years

Proceedings Papers

Bearing and Seal Dynamics

Structural Mechanics and Vibration

Aerodynamic Excitation and Damping (With Turbomachinery)

Email alerts

Most Read Proceedings Papers in GT

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only