A bottoming 275 kilowatt planar solid oxide fuel cell (SOFC) gas turbine (GT) hybrid system control approach has been conceptualized and designed. Based on previously published modeling techniques, a dynamic model is developed that captures the physics sufficient for dynamic simulation of all processes that affect the system with time scales greater than ten milliseconds. The dynamic model was used to make system design improvements to enable the system to operate dynamically over a wide range of power output (15 to 100% power). The wide range of operation was possible by burning supplementary fuel in the combustor and operating the turbine at variable speed for improved thermal management. The dynamic model was employed to design a control strategy for the system. Analyses of the relative gain array (RGA) of the system at several operating points gave insight into input/output (I/O) pairing for decentralized control. Particularly, the analyses indicate that for SOFC/GT hybrid plants that use voltage as a controlled variable it is beneficial to control system power by manipulating fuel cell current and to control fuel cell voltage by manipulating the anode fuel flowrate. To control the stack temperature during transient load changes, a cascade control structure is employed in which a fast inner loop that maintains the GT shaft speed receives its setpoint from a slower outer loop that maintains the stack temperature. Fuel can be added to the combustor to maintain the turbine inlet temperature for the lower operating power conditions. To maintain fuel utilization and to prevent fuel starvation in the fuel cell, fuel is supplied to the fuel cell proportionally to the stack current. In addition, voltage is used as an indicator of varying fuel concentrations allowing the fuel flow to be adjusted accordingly. Using voltage as a sensor is shown to be a potential solution to making SOFC systems robust to varying fuel compositions. The simulation tool proved effective for fuel cell/GT hybrid system control system development. The resulting SOFC/GT system control approach is shown to have transient load-following capability over a wide range of power, ambient temperature, and fuel concentration variations.
Skip Nav Destination
ASME 2006 4th International Conference on Fuel Cell Science, Engineering and Technology
June 19–21, 2006
Irvine, California, USA
Conference Sponsors:
- Nanotechnology Institute
ISBN:
0-7918-4247-9
PROCEEDINGS PAPER
Control Design for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System
Fabian Mueller,
Fabian Mueller
University of California at Irvine, Irvine, CA
Search for other works by this author on:
Faryar Jabbari,
Faryar Jabbari
University of California at Irvine, Irvine, CA
Search for other works by this author on:
Jacob Brouwer,
Jacob Brouwer
University of California at Irvine, Irvine, CA
Search for other works by this author on:
Rory Roberts,
Rory Roberts
University of California at Irvine, Irvine, CA
Search for other works by this author on:
Tobias Junker,
Tobias Junker
FuelCell Energy, Inc., Danbury, CT
Search for other works by this author on:
Hossein Ghezel-Ayagh
Hossein Ghezel-Ayagh
FuelCell Energy, Inc., Danbury, CT
Search for other works by this author on:
Fabian Mueller
University of California at Irvine, Irvine, CA
Faryar Jabbari
University of California at Irvine, Irvine, CA
Jacob Brouwer
University of California at Irvine, Irvine, CA
Rory Roberts
University of California at Irvine, Irvine, CA
Tobias Junker
FuelCell Energy, Inc., Danbury, CT
Hossein Ghezel-Ayagh
FuelCell Energy, Inc., Danbury, CT
Paper No:
FUELCELL2006-97150, pp. 629-640; 12 pages
Published Online:
September 15, 2008
Citation
Mueller, F, Jabbari, F, Brouwer, J, Roberts, R, Junker, T, & Ghezel-Ayagh, H. "Control Design for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System." Proceedings of the ASME 2006 4th International Conference on Fuel Cell Science, Engineering and Technology. ASME 2006 Fourth International Conference on Fuel Cell Science, Engineering and Technology, Parts A and B. Irvine, California, USA. June 19–21, 2006. pp. 629-640. ASME. https://doi.org/10.1115/FUELCELL2006-97150
Download citation file:
4
Views
Related Proceedings Papers
Related Articles
Control Design for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System
J. Fuel Cell Sci. Technol (August,2007)
Linear Quadratic Regulator for a Bottoming Solid Oxide Fuel Cell Gas Turbine Hybrid System
J. Dyn. Sys., Meas., Control (September,2009)
Multivariable Robust Control of a Simulated Hybrid Solid Oxide Fuel Cell Gas Turbine Plant
J. Fuel Cell Sci. Technol (August,2010)
Related Chapters
Performance and Mechanical Equipment Standards
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students