Skip Nav Destination
Proceedings Papers
1st International Fuel Cell Science, Engineering and Technology Conference
Design Considerations in the Development of Fuel Cell Power Modules
FUELCELL 2003; 1-8https://doi.org/10.1115/FUELCELL2003-1695
Topics:
Design
,
Fuel cells
Fuel Cells: What’s Up Next?
FUELCELL 2003; 9-19https://doi.org/10.1115/FUELCELL2003-1696
Overview of Direct Carbonate Fuel Cell Technology and Products Development
FUELCELL 2003; 21-32https://doi.org/10.1115/FUELCELL2003-1697
Topics:
Coal
,
Cycles
,
Electricity (Physics)
,
Energy generation
,
Fuel cell power plants
,
Fuel cell technology
,
Fuel cells
,
Fuel gasification
,
Fuels
,
Gas turbines
Providing and Processing Fuel
FUELCELL 2003; 41-54https://doi.org/10.1115/FUELCELL2003-1699
Topics:
Fuels
,
Hydrogen
,
Fuel cells
,
Design
,
Natural gas
,
Transportation systems
,
Biofuel
,
Chemistry
,
Coal
,
Fossil fuels
Fuel Processing for Mobile Fuel Cell Systems
FUELCELL 2003; 55-59https://doi.org/10.1115/FUELCELL2003-1700
Topics:
Fuel cells
,
Fuel processing
,
Hydrogen
,
Fuels
,
Automobiles
,
Density
,
Electronics
,
Engines
,
Gasoline
,
Generators
A Review of Hydrogen Production Technologies
FUELCELL 2003; 61-74https://doi.org/10.1115/FUELCELL2003-1701
Topics:
Hydrogen production
,
Solar energy
,
Hydrogen
,
Economic analysis
,
Electrolysis
,
Fossil fuels
,
Water
,
Biomass
,
Cycles
,
Fuels
Advanced Hydrogen Fuel Systems for Fuel Cell Vehicles
FUELCELL 2003; 83-87https://doi.org/10.1115/FUELCELL2003-1703
Topics:
Fuel cell vehicles
,
Hydrogen fuels
,
Hydrogen
,
Hydrogen storage
,
Storage
,
Fuel cells
,
Vehicles
,
Safety
,
Automobiles
,
Buses
Mechanical Integrity Issues of Fuel Cells
FUELCELL 2003; 89-94https://doi.org/10.1115/FUELCELL2003-1704
Topics:
Fuel cells
,
Temperature
,
Creep
,
Residual stresses
,
Stress
,
Cooling
,
Dynamics (Mechanics)
,
Fluids
,
High temperature
,
Operating temperature
Development of a Comprehensive Simulation Platform to Investigate System Interactions Among Solid-Oxide Fuel Cell, Power-Conditioning Systems, and Application Loads
S. K. Mazumder, R. Burra, K. Acharya, M. R. von Spakovsky, D. Nelson, D. Rancruel, C. Haynes, R. Williams
FUELCELL 2003; 101-109https://doi.org/10.1115/FUELCELL2003-1706
Investigation of Transport Phenomena in Micro Flow Channels for Miniature Fuel Cells
FUELCELL 2003; 143-148https://doi.org/10.1115/FUELCELL2003-1711
Topics:
Flow (Dynamics)
,
Fuel cells
,
Transport phenomena
,
Microchannels
,
Power density
,
Design
,
Engineering prototypes
,
Gas flow
,
Metals
,
Modeling
Modeling of Reformers for Fuel Cell Applications
FUELCELL 2003; 157-165https://doi.org/10.1115/FUELCELL2003-1713
Development of Natural Gas Reformer in ITRI
FUELCELL 2003; 167-170https://doi.org/10.1115/FUELCELL2003-1714
Topics:
Natural gas
,
Catalysts
,
Electrolytes
,
Fuel cells
,
Hydrogen
,
Polymers
,
Water
,
Flow (Dynamics)
,
High temperature
,
Low temperature
GlidArc-Assisted Production of Synthesis Gas Through Propane Partial Oxidation
FUELCELL 2003; 175-179https://doi.org/10.1115/FUELCELL2003-1716
Topics:
Oxidation
,
Syngas
,
Catalysts
,
Fuel cells
,
Sulfur
,
Atmospheric pressure
,
Electricity (Physics)
,
Plasmas (Ionized gases)
,
Recycling
,
Solid oxide fuel cells
GlidArc-Assisted Production of Synthesis Gas Through Partial Oxidation of Natural Gas
FUELCELL 2003; 181-185https://doi.org/10.1115/FUELCELL2003-1717
Topics:
Natural gas
,
Oxidation
,
Syngas
,
Plasmas (Ionized gases)
,
Atmospheric pressure
,
Catalysts
,
Electricity (Physics)
,
Fuel cells
,
Recycling
,
Soot
Performance Modeling of PEM Fuel Cell Operated on Reformate
FUELCELL 2003; 233-240https://doi.org/10.1115/FUELCELL2003-1724
Topics:
Modeling
,
Proton exchange membrane fuel cells
,
Anodes
,
Hydrogen
,
Design
,
Diffusers
,
Oxidation
,
Platinum
,
Equations
,
Flow (Dynamics)
Study on Morphological Properties and Mass Transport Parameters of ORR in Recast Ion-Exchange Polymer Electrolyte Membranes
FUELCELL 2003; 241-243https://doi.org/10.1115/FUELCELL2003-1725
Topics:
Ion exchange
,
Proton exchange membranes
,
Temperature
,
Diffusion (Physics)
,
Electrolytes
,
Membranes
,
Oxygen
,
Water
,
Heat treating (Metalworking)
,
Polymers
Development of PEMFC Systems for Space Power Applications
FUELCELL 2003; 245-251https://doi.org/10.1115/FUELCELL2003-1726
Topics:
Proton exchange membrane fuel cells
,
Fuel cells
,
Oxygen
,
Water
,
Ejectors
,
Fluids
,
NASA
,
Density
,
Design
,
Energy storage
PEM Fuel Cell Bipolar Plate Reliability and Material Selection
FUELCELL 2003; 253-260https://doi.org/10.1115/FUELCELL2003-1727
Topics:
Proton exchange membrane fuel cells
,
Reliability
,
Fuel cells
,
Design
,
Durability
,
Plates (structures)
,
Cycles
,
Failure mechanisms
,
Fuels
,
Manufacturing
Membraneless Fuel Cell Based on Laminar Flow
FUELCELL 2003; 261-265https://doi.org/10.1115/FUELCELL2003-1728
A Silicon Microfabricated Direct Formic Acid Fuel Cell
J. Yeom, G. Z. Mozsgai, A. Asthana, B. R. Flachsbart, P. Waszczuk, E. R. Choban, P. J. A. Kenis, M. A. Shannon
FUELCELL 2003; 267-272https://doi.org/10.1115/FUELCELL2003-1729
Topics:
Fuel cells
,
Silicon
,
Catalysts
,
Electrodes
,
Fuel cell applications
,
Membranes
,
Power density
,
Proton exchange membrane fuel cells
,
Water
Oxygen: Aluminum Fuel Cells and Most Practical Fields of Their Applications
FUELCELL 2003; 273-277https://doi.org/10.1115/FUELCELL2003-1730
Topics:
Aluminum
,
Fuel cells
,
Oxygen
,
Anodes
,
Power stations
,
Storage
,
Alloys
,
Electrolytes
,
Emergencies
,
Hydrogen
Fabrication of Micro-Actuated Galvanic Cells as Power on Demand for Lab on a Chip Applications by Means of Novel PCB/MEMS Technology
FUELCELL 2003; 279-286https://doi.org/10.1115/FUELCELL2003-1731
Topics:
Actuators
,
Aluminum
,
Batteries
,
Circuits
,
Construction
,
Copper
,
Industrial research
,
Liquid crystalline polymers
,
Manufacturing
,
Metals
Fabrication of Miniature Silicon Wafer Fuel Cells Using Micro Fabrication Technologies
FUELCELL 2003; 287-291https://doi.org/10.1115/FUELCELL2003-1732
Topics:
Fuel cells
,
Manufacturing
,
Microfabrication
,
Semiconductor wafers
,
Fuels
,
Membranes
,
Silicon
,
Water
,
Anodes
,
Electrolytes
Some Aspects of Mass Transfer Within the Passages of Fuel Cells
FUELCELL 2003; 293-299https://doi.org/10.1115/FUELCELL2003-1733
Topics:
Fuel cells
,
Mass transfer
,
Heat
,
Ducts
,
Electrical conductance
,
Scalars
Exergy Analysis of Polymer Electrolyte Fuel Cell Systems Using Methanol
FUELCELL 2003; 301-306https://doi.org/10.1115/FUELCELL2003-1734
Topics:
Electrolytes
,
Exergy analysis
,
Fuel cells
,
Methanol
,
Polymers
,
Exergy
,
Direct methanol fuel cells
,
Enthalpy
,
Steam reforming
,
Current density
Thermodynamic Modeling and Performance Analysis of a Power Generation System Based on the Solid Oxide Fuel Cell
FUELCELL 2003; 307-314https://doi.org/10.1115/FUELCELL2003-1735
Topics:
Energy / power systems
,
Modeling
,
Solid oxide fuel cells
,
Exhaust systems
,
Steam
,
Fuels
,
High pressure (Physics)
,
Hydrogen
,
Methane
,
Natural gas
Analogies Between Fuel Cells and Heat Exchangers: From Phenomena to Design Principles
FUELCELL 2003; 315-332https://doi.org/10.1115/FUELCELL2003-1736
Topics:
Design
,
Fuel cells
,
Heat exchangers
,
Electrodes
,
Bridges (Structures)
,
Electric potential
,
Engineering design processes
,
Engineering simulation
,
Fins
,
Heat
Simulation of a 25 kW Steam-Methanol Fuel Processor/PEM Fuel Cell System
FUELCELL 2003; 339-345https://doi.org/10.1115/FUELCELL2003-1738
Topics:
Fuels
,
Methanol
,
Proton exchange membrane fuel cells
,
Simulation
,
Steam
,
Hydrogen
,
Membranes
,
Pressure
,
Carbon
,
System efficiency
State of the Art About the Effects of Impurities on MCFCs and Pointing Out of Additional Research for Alternative Fuel Utilization
FUELCELL 2003; 347-353https://doi.org/10.1115/FUELCELL2003-1739
Topics:
Fuels
,
Molten carbonate fuel cells
,
Fuel cells
,
Gases
,
Energy generation
,
Sulfur
,
Anodes
,
Carbon
,
Coal
,
Design
Gasification and Fuel Cell Integration With Bottoming Turbine Cycle: Performances of a Hybrid Plant for Electricity Production
FUELCELL 2003; 355-362https://doi.org/10.1115/FUELCELL2003-1740
Topics:
Cycles
,
Fuel cells
,
Fuel gasification
,
Turbines
,
Energy generation
,
Biomass
,
Fuels
,
Carbon
,
Combustion
,
Compression
An Investigation of DIR-MCFC Based Cooling, Heating and Power System
FUELCELL 2003; 373-379https://doi.org/10.1115/FUELCELL2003-1742
Topics:
Cooling
,
Heating
,
Molten carbonate fuel cells
,
Power systems (Machinery)
,
Combined heat and power
,
Absorption
,
Fuel cells
,
Fuels
,
Heat
,
Hot water
Analysis and Optimization of a Hybrid MCFC-Steam Turbine Plant
FUELCELL 2003; 381-384https://doi.org/10.1115/FUELCELL2003-1743
Topics:
Molten carbonate fuel cells
,
Optimization
,
Steam
,
Turbines
,
Cycles
,
Fuel cells
,
Exhaust systems
,
Gas turbines
,
Steam turbines
,
Temperature
Innovative Thermal Management of Fuel Cell Power Electronics
FUELCELL 2003; 395-401https://doi.org/10.1115/FUELCELL2003-1745
Topics:
Electronics
,
Fuel cells
,
Thermal management
,
Design
,
Computational fluid dynamics
,
Modeling
,
Aluminum extrusions
,
Bone
,
Computer-aided design
,
Convection
Investigation of a Novel Reciprocating Compression Reformer for Use in Solid Oxide Fuel Cell Systems
FUELCELL 2003; 403-409https://doi.org/10.1115/FUELCELL2003-1746
Topics:
Compression
,
Solid oxide fuel cells
,
Fuels
,
Fuel cells
,
Carbon
,
Equilibrium (Physics)
,
System efficiency
,
Heat
,
Modeling
,
Natural gas
The Role of High Performance Foil Bearings in Advanced, Oil-Free, High-Speed Motor Driven Compressors
FUELCELL 2003; 411-417https://doi.org/10.1115/FUELCELL2003-1747
Topics:
Compressors
,
Engines
,
Foil bearings
,
Motors
,
Bearings
,
Maintenance
,
Rotors
,
Torque
,
Damping
,
Design
“Floating Scroll” Technology for Fuel Cell Air Management System
FUELCELL 2003; 419-423https://doi.org/10.1115/FUELCELL2003-1748
Topics:
Fuel cells
,
Compressors
,
Centrifugal force
,
Compression
,
Coolants
,
Cooling
,
Lubricants
,
Lubrication
,
Pressure
,
Proton exchange membrane fuel cells
Systems Analysis of Diesel Based Fuel Cells for Auxiliary Power Units
FUELCELL 2003; 425-431https://doi.org/10.1115/FUELCELL2003-1749
Topics:
Diesel
,
Fuel cells
,
Systems analysis
,
Fuels
,
Carbon
,
Carbon dioxide
,
Catalysts
,
Combustion chambers
,
Fuel cell technology
,
Heat
Regulations Governing Transportation of Portable Fuel Cell Devices and Systems in Aircrafts
FUELCELL 2003; 433-441https://doi.org/10.1115/FUELCELL2003-1750
Topics:
Aircraft
,
Fuel cells
,
Regulations
,
Transportation systems
,
Hazardous substances
,
Fuels
,
Buses
,
Fuel storage
,
Hydrogen
,
Laptop computers
Circumventing the Challenges of Fuel Cell Powered Automobiles
FUELCELL 2003; 443-448https://doi.org/10.1115/FUELCELL2003-1751
Topics:
Automobiles
,
Fuel cells
,
Vehicles
,
Electricity (Physics)
,
Public policy
,
Combustion
,
Design
,
Energy consumption
,
Engines
,
Fuel cell applications
An Evaluation of Cooling Systems for PEMFCs in Transport Applications
FUELCELL 2003; 455-462https://doi.org/10.1115/FUELCELL2003-1753
Topics:
Cooling systems
,
Proton exchange membrane fuel cells
,
Fuel cells
,
Automobiles
,
Condensation
,
Density
,
Electrolytes
,
Engines
,
Freezing
,
Heat
Modeling of Two-Phase Flow in a Cathode Duct of PEM Fuel Cells
FUELCELL 2003; 463-470https://doi.org/10.1115/FUELCELL2003-1754
Topics:
Ducts
,
Modeling
,
Proton exchange membrane fuel cells
,
Two-phase flow
,
Heat
,
Water
,
Pressure
,
Temperature
,
Condensation
,
Convection
Water and Thermal Balance in PEM Fuel Cells
FUELCELL 2003; 477-486https://doi.org/10.1115/FUELCELL2003-1756
The Influence of Water and Thermal Conditions on the Performance of PEM Fuel Cell
FUELCELL 2003; 487-492https://doi.org/10.1115/FUELCELL2003-1757
Topics:
Proton exchange membrane fuel cells
,
Water
,
Catalysts
,
Floods
,
Fuel cells
,
Anodes
,
Electrochemical reactions
,
Flow (Dynamics)
,
Heat
,
Hydrogen
Metal-Supported Solid Oxide Fuel Cells for Operation at Temperatures of 500–650°C
A. Atkinson, S. Baron, N. P. Brandon, A. Esquirol, J. A. Kilner, N. Oishi, R. Rudkin, B. C. H. Steele
FUELCELL 2003; 499-506https://doi.org/10.1115/FUELCELL2003-1759
Topics:
Metals
,
Solid oxide fuel cells
,
Temperature
,
Electrolytes
,
Anodes
,
Stainless steel
,
Thick films
,
Manufacturing
,
Membranes
,
Sintering
Improved Multi-Functionality of Ni/YSZ Cermet Anode by Optimizing Fabrication Processes
FUELCELL 2003; 511-516https://doi.org/10.1115/FUELCELL2003-1761
Topics:
Anodes
,
Cermets
,
Manufacturing
,
Ceramics
,
Electrical conductivity
,
Performance evaluation
,
Permeability
,
Raw materials
,
Solid oxide fuel cells
Development of a Comprehensive Numerical Model for Analyzing a Tubular-Type Indirect Internal Reforming SOFC
FUELCELL 2003; 521-528https://doi.org/10.1115/FUELCELL2003-1763
Topics:
Computer simulation
,
Solid oxide fuel cells
,
Electric current
,
Energy generation
,
Overvoltage
,
Temperature
,
Catalysts
,
Circuits
,
Fuels
,
Gas flow