Characterization of Cavitation During Pump Operation Based on Hilbert-Huang Transform Available to Purchase

Cavitation has negative influence on pump operation. In order to detect incipient cavitation effectively, experimental investigation was conducted to through acquisition of current and vibration signals during cavitation process. In this research, a centrifugal pump was modeled for research. The data was analyzed by HHT method. The results show that Torque oscillation resulted from unsteady flow during cavitation process could result in energy variation. Variation regulation of RMS of IMF in current signal is similar to that in axial vibration signal. But RMS of IMF in current signal is more sensitive to cavitation generation. It could be regarded as the indicator of incipient cavitation. RMS variation of IMF in base, radial, longitudinal vibration signals experiences an obvious increasing when cavitation gets severe. Such single variation regulation could be selected as the indicator of cavitation stage recognition. Hilbert-Huang transform is suitable for transient and non-stationary signal process. Time-frequency characteristics could be extracted from results of HHT process to reveal pump operation condition. The contents of current work could provide valuable references for further research on centrifugal pump operation detection.