Experimental Determination of Hydrodynamic Parameters of Air-Water Two-Phase Slug Flow in Horizontal Pipes Available to Purchase

Two phase slug flow is the most common flow pattern for horizontal and near-horizontal pipelines. This study is designed to determine experimental velocities of elongated bubbles, lengths of liquid slugs and elongated bubbles, and slug frequencies for twenty flow rates combinations of a two phase air-water system that belong to a slug type pattern in horizontal pipes with a non invasive electronic device made of Photo-diodes (emitter) and photo-transistors (receiver) in a non visible length wave of 940 nanometers. The non intrusive electronic device is validated by simultaneously taking pictures with a high speed camera, (Kodak model Ektapro 4540 mx Imager, at shooting speed of 4500 frames per second, the picture resolution is 256 × 256 pixels), through a visualization cell filled with glycerin. This work is done with acrylic pipes of 0,03175 m inner diameter, to ensure complete flow development, the pictures are taken from a visualization cell located at a x/D = 249, the electronic device is located at x/D = 250. Air superficial velocity ranged between 0.156 and 0.468 m/s while water superficial velocity ranged between 0.159 and 1.264m/s. It is found that the non intrusive electronic device formed by photo diodes and photo transistors is an accurate technique that can be used in the determination of elongated bubble velocities, lengths and slug frequencies.