Skip Nav Destination
Proceedings Papers
In This Volume
Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
Keynotes
The Onset of Turbulence: Insights Into the Navier-Stokes Equations
FEDSM 2017; V01AT01A001https://doi.org/10.1115/FEDSM2017-69491
Topics:
Navier-Stokes equations
,
Turbulence
,
Fluids
,
Biology
,
Chemistry
,
Engineering disciplines
,
Mathematics
,
Physics
,
Reynolds number
,
Students
Dynamic Stability of Flapping-Wing Micro Air Vehicles With Unsteady Aerodynamic Model
FEDSM 2017; V01AT01A002https://doi.org/10.1115/FEDSM2017-69568
Topics:
Dynamic stability
,
Vehicles
,
Wings
,
Flight
,
Aerodynamics
,
Multibody dynamics
18th International Symposium on Advances in Numerical Modeling for Turbomachinery Flow Optimization
Numerical Analysis of a Centrifugal Fan for a Road Sweeper
FEDSM 2017; V01AT02A001https://doi.org/10.1115/FEDSM2017-69103
Topics:
Numerical analysis
,
Roads
,
Flow (Dynamics)
,
Computational fluid dynamics
,
Ducts
,
Impellers
,
Machinery
,
Carbon dioxide
,
Corporate average fuel economy
,
Dust
Design Study of a Pyrolysis Plant Compressor With Heavy Wall Erosion From Metal Particle Impact
FEDSM 2017; V01AT02A002https://doi.org/10.1115/FEDSM2017-69108
Topics:
Compressors
,
Design
,
Erosion
,
Metals
,
Particle collisions
,
Pyrolysis
,
Particulate matter
,
Blades
,
Impellers
,
Computational fluid dynamics
Study on Appropriate Diameter of Centrifugal Fan Surrounded by Heat Exchanger in Air Conditioner
FEDSM 2017; V01AT02A003https://doi.org/10.1115/FEDSM2017-69115
Topics:
Air conditioners
,
Heat exchangers
,
Cycles
,
Heat
,
Pressure drop
,
Shapes
,
Air flow
,
Flow (Dynamics)
,
Pressure
,
Vortices
Research on the Geometry Parameters of Diffuser Vane Influence on the Performance of Bulb Tubular Pumping System
FEDSM 2017; V01AT02A005https://doi.org/10.1115/FEDSM2017-69135
Topics:
Diffusers
,
Geometry
,
Pumps
,
Diffusion (Physics)
,
Design
,
Axial flow
,
Computational fluid dynamics
,
Flow (Dynamics)
,
Impellers
,
Turbulence
Aerodynamic Design and Optimization of Pipe Diffuser for a High-Loading Centrifugal Compressor
FEDSM 2017; V01AT02A006https://doi.org/10.1115/FEDSM2017-69152
Topics:
Compressors
,
Design
,
Diffusers
,
Optimization
,
Pipes
,
Flow (Dynamics)
,
Pressure
,
Impellers
,
Computational fluid dynamics
,
Computer simulation
Calculation Model Based Design-Point Gas Generator Performance Adaptation Method
FEDSM 2017; V01AT02A007https://doi.org/10.1115/FEDSM2017-69180
Topics:
Design
,
Generators
,
Simulation
,
Simulation models
,
Flow (Dynamics)
,
Pressure
,
Compressors
,
Fault diagnosis
,
Fuels
,
Gas turbines
Investigation on Pulsating Flow Effect of a Turbocharger Turbine
FEDSM 2017; V01AT02A008https://doi.org/10.1115/FEDSM2017-69186
Topics:
Pulsatile flow
,
Turbines
,
Turbochargers
,
Flow (Dynamics)
,
Engines
,
Inflow
,
Internal combustion engines
,
Rotors
,
Simulation
,
Stress
Effects of a Groove Patterned Cooling Tube on the Film Cooling Performance of a Gas Turbine Blade
FEDSM 2017; V01AT02A010https://doi.org/10.1115/FEDSM2017-69263
Topics:
Blades
,
Cooling
,
Film cooling
,
Gas turbines
,
Fluids
,
Temperature
,
Turbine blades
,
Carbon dioxide
,
Durability
,
Flow (Dynamics)
29th Symposium on Fluid Machinery
Investigation on the Influence of Surface Roughness on the Moment Coefficient in a Rotor-Stator Cavity With Centripetal Through-Flow
FEDSM 2017; V01AT03A001https://doi.org/10.1115/FEDSM2017-69018
Topics:
Cavities
,
Flow (Dynamics)
,
Rotors
,
Stators
,
Surface roughness
,
Impellers
,
Pumps
,
Turbines
,
Design
,
Leakage flows
The Optimum Meridian Profile of Various Annular Surface Roughness and Impeller Blade Number
FEDSM 2017; V01AT03A002https://doi.org/10.1115/FEDSM2017-69024
Topics:
Blades
,
Impellers
,
Surface roughness
,
Design
,
Friction
,
Reynolds number
,
Flow (Dynamics)
,
Symmetry (Physics)
,
Diffusion (Physics)
,
Shape design
Inner Flow Field PIV Measurement and Study on Turbulence Generator of Medium Consistency Pump
FEDSM 2017; V01AT03A003https://doi.org/10.1115/FEDSM2017-69034
Topics:
Flow (Dynamics)
,
Generators
,
Pumps
,
Turbulence
,
Blades
,
Kinetic energy
,
Fluid dynamics
,
Internal flow
,
Mirrors
,
Particulate matter
Experimental Investigation of the Wake Decay Process in an Axial Pump With Varied Rotor-Stator Axial Spacings
FEDSM 2017; V01AT03A004https://doi.org/10.1115/FEDSM2017-69044
Topics:
Pumps
,
Rotors
,
Stators
,
Wakes
,
Blades
,
Compressors
,
Computation
,
Computational fluid dynamics
,
Flow (Dynamics)
,
Kinetic energy
Lubricant Inertia in Water Lubricated Bearings
FEDSM 2017; V01AT03A005https://doi.org/10.1115/FEDSM2017-69110
Topics:
Bearings
,
Inertia (Mechanics)
,
Lubricants
,
Water
,
Turbulence
,
Pressure
,
Damping
,
Fluid films
,
Fluids
,
Machinery
Oil Aeration and Degassing Measurements for the Study of Aero-Engine Oil Pump Performance in Cavitation
FEDSM 2017; V01AT03A006https://doi.org/10.1115/FEDSM2017-69119
Topics:
Aircraft engines
,
Cavitation
,
Oil pumps
,
Pressure
,
Transients (Dynamics)
,
Density
,
Pumps
,
Coriolis force
,
Flow (Dynamics)
,
Lubrication
Lumped Parameter and Three-Dimensional CFD Simulation of a Variable Displacement Vane Pump for Engine Lubrication
FEDSM 2017; V01AT03A007https://doi.org/10.1115/FEDSM2017-69124
Topics:
Computational fluid dynamics
,
Displacement
,
Engines
,
Lubrication
,
Pumps
,
Simulation
,
Pressure
,
Flow (Dynamics)
,
Leakage
,
Circuits
Comparative Study on Hydraulic Performance of Single-Suction Centrifugal Pump and Double-Suction Centrifugal Pump
FEDSM 2017; V01AT03A008https://doi.org/10.1115/FEDSM2017-69142
Topics:
Centrifugal pumps
,
Suction
,
Pumps
,
Impellers
,
Suction pumps
,
Blades
,
Cavitation
,
Pressure
,
Design
,
Engineering systems and industry applications
Load Rejection Test and Numerical Prediction of Critical Load Case Scenarios for Pumped Storage Plant
FEDSM 2017; V01AT03A009https://doi.org/10.1115/FEDSM2017-69164
Topics:
Pumped storage power plants
,
Stress
,
Pressure
,
Transients (Dynamics)
,
Water
,
Boundary-value problems
,
China
,
Computer simulation
,
Design
,
Energy storage
Study on Slip Phenomenon of Pumps As Turbines in Different Working Conditions
FEDSM 2017; V01AT03A010https://doi.org/10.1115/FEDSM2017-69165
Topics:
Pumps
,
Turbines
,
Eddies (Fluid dynamics)
,
Impellers
,
Flow (Dynamics)
,
Pressure
,
Stress
,
Blades
,
Design
,
Energy recovery
Flow Characteristics of Axial-Flow Fans With an Upstream/Downstream Blockage Disk
FEDSM 2017; V01AT03A011https://doi.org/10.1115/FEDSM2017-69182
Topics:
Axial flow
,
Disks
,
Fans
,
Flow (Dynamics)
,
Pressure
,
Filters
,
Noise (Sound)
,
Space
,
Ventilation
,
Vibration
A Detailed Experimental and Numerical Investigation of Flow Structures in a Turbine Tip Gap With Passive Injection
FEDSM 2017; V01AT03A012https://doi.org/10.1115/FEDSM2017-69195
Topics:
Flow (Dynamics)
,
Turbines
,
Blades
,
Cascades (Fluid dynamics)
,
Pressure
,
Engineering simulation
,
Simulation
,
Suction
,
Flow separation
,
Flow visualization
Numerical Study on Flow Characteristics in High Multi-Stage Pressure Reducing Valve
FEDSM 2017; V01AT03A013https://doi.org/10.1115/FEDSM2017-69210
Topics:
Flow (Dynamics)
,
Pressure
,
Valves
,
Energy consumption
,
Temperature
,
Design
,
Energy conservation
,
Energy dissipation
,
High pressure (Physics)
,
Noise (Sound)
Pressure Oscillations in Piva Hydro Power Plant Draft Tube: Case Studies
FEDSM 2017; V01AT03A014https://doi.org/10.1115/FEDSM2017-69218
Topics:
Oscillations
,
Power stations
,
Pressure
,
Elevations (Drawings)
,
Engineers
,
Francis turbines
,
Teams
,
Turbines
,
Water
Research on Heat-Transfer and Cooling Performance of Gas Turbine Endwall
FEDSM 2017; V01AT03A016https://doi.org/10.1115/FEDSM2017-69245
Topics:
Cooling
,
Gas turbines
,
Heat transfer
,
Blades
,
Pressure gradient
,
Flow (Dynamics)
,
Turbine blades
,
Vortices
,
Boundary layers
,
Combined cycle power stations
Reduction Method for the Secondary Flow Loss in Turbine Cascade
FEDSM 2017; V01AT03A017https://doi.org/10.1115/FEDSM2017-69254
Topics:
Cascades (Fluid dynamics)
,
Flow (Dynamics)
,
Turbines
,
Vortices
,
Gas turbines
,
Blades
,
Flowmeters
,
Pressure
,
Pressure measurement
,
Shapes
Feasibility Study of Centrifugal Compressor Performance Under Wet Gas Conditions
FEDSM 2017; V01AT03A018https://doi.org/10.1115/FEDSM2017-69255
Topics:
Compressors
,
Centrifugal force
,
Errors
,
Fluids
,
Gas flow
,
Impellers
,
Liquid films
,
Test facilities
Visualization of Internal Flow Field of Propeller Fan
FEDSM 2017; V01AT03A019https://doi.org/10.1115/FEDSM2017-69261
Topics:
Internal flow
,
Propellers
,
Visualization
,
Blades
,
Wake turbulence
,
Fans
,
Flow (Dynamics)
,
Noise (Sound)
,
Vortices
,
Computational fluid dynamics
Unstable Flow Characteristics in S-Shaped Region of Pump-Turbine Runners With Large Blade Lean
FEDSM 2017; V01AT03A021https://doi.org/10.1115/FEDSM2017-69275
Topics:
Blades
,
Flow (Dynamics)
,
Pump turbines
,
Vortices
,
Guide vanes
,
Annulus
,
Brakes
,
Computational fluid dynamics
,
Fluctuations (Physics)
,
Pressure
Noise Reduction Measures for an Axial Fan
FEDSM 2017; V01AT03A022https://doi.org/10.1115/FEDSM2017-69287
Topics:
Noise control
,
Impellers
,
Blades
,
Flow (Dynamics)
,
Pressure
,
Acoustics
,
Electric motors
,
Noise (Sound)
,
Cooling
,
Design
Experimental and Numerical Analysis of Failure for 4-Fan Wall With Different Number of Fans Units
FEDSM 2017; V01AT03A023https://doi.org/10.1115/FEDSM2017-69292
Topics:
Failure
,
Fans
,
Numerical analysis
,
Flow (Dynamics)
,
Design
,
Pressure
,
Pressure drop
,
Vortices
Modeling the Viscoelastic Effects in the Hydrodynamic Lubrication of Journal Bearing in a High-Torque Low Speed Diesel Engine
FEDSM 2017; V01AT03A024https://doi.org/10.1115/FEDSM2017-69306
Topics:
Diesel engines
,
Journal bearings
,
Lubrication
,
Modeling
,
Torque
,
Lubricants
,
Engines
,
Wear
,
Adhesives
,
Film thickness
Modeling Shear Heating in the Hydrodynamic Lubrication of Crankshaft Journal Bearing of a High-Torque Diesel Engine Operating at a Low Speed
FEDSM 2017; V01AT03A025https://doi.org/10.1115/FEDSM2017-69307
Topics:
Diesel engines
,
Heating
,
Journal bearings
,
Lubrication
,
Modeling
,
Shear (Mechanics)
,
Torque
,
Bearings
,
Lubricants
,
Viscosity
Study on Vortex Generators for Control of Attached Cavitation
FEDSM 2017; V01AT03A026https://doi.org/10.1115/FEDSM2017-69405
Topics:
Cavitation
,
Generators
,
Vortices
,
Hydrofoil
,
Boundary layers
,
Cavities
,
Corners (Structural elements)
,
Flow (Dynamics)
,
Fluids
,
Machinery
Study on the Transient Characteristics of Pump During the Starting Process With Assisted Valve
FEDSM 2017; V01AT03A027https://doi.org/10.1115/FEDSM2017-69426
Topics:
Pumps
,
Transients (Dynamics)
,
Valves
,
Design
,
Centrifugal pumps
,
Computer simulation
,
Dynamic response
,
Engines
,
Fluids
,
High pressure (Physics)
Effects of Medium Containing Free Gas on Hydraulic Performance of Certain Single Stage Centrifugal Pump in 3rd Generation Reactor
FEDSM 2017; V01AT03A028https://doi.org/10.1115/FEDSM2017-69481
Topics:
Centrifugal pumps
,
Pumps
,
Sprays
,
Electricity (Physics)
,
Nuclear research
,
Suction
,
Mechanical properties
,
Noise (Sound)
,
Safety
,
Vents
Numerical Analysis on the Impact of Inter-Stage Flow Addition in a High-Pressure Steam Turbine
FEDSM 2017; V01AT03A029https://doi.org/10.1115/FEDSM2017-69514
Topics:
Flow (Dynamics)
,
High pressure (Physics)
,
Numerical analysis
,
Steam turbines
,
Turbines
,
Valves
,
Fluids
,
Pressure drop
,
Geometric modeling
,
Shapes
24th Symposium on Industrial and Environmental Applications of Fluid Mechanics
Entropy Generation for Oscillatory Flow Inside Thermal-Lag Type Stirling Engine: Numerical Analysis
FEDSM 2017; V01AT04A001https://doi.org/10.1115/FEDSM2017-69010
Topics:
Entropy
,
Flow (Dynamics)
,
Numerical analysis
,
Stirling engines
,
Heat transfer
,
Computer simulation
,
Cylinders
,
Design
,
Engines
,
Fluids
Fuel-Spray Simulation With Valve Motion Perpendicular to Closing Direction
FEDSM 2017; V01AT04A002https://doi.org/10.1115/FEDSM2017-69072
Topics:
Fuels
,
Simulation
,
Sprays
,
Valves
,
Jets
,
Nozzles
,
Particulate matter
,
Fuel injectors
,
Air pollution
,
Automotive engines
Investigation of Dust Separator Design and Risk Mitigation
FEDSM 2017; V01AT04A003https://doi.org/10.1115/FEDSM2017-69097
Topics:
Design
,
Dust
,
Risk mitigation
,
Flow (Dynamics)
,
Solids
,
Ejectors
,
Particulate matter
,
Plates (structures)
,
Bulk solids
,
Computational fluid dynamics
Improving LPG Pump Efficiency by Considering Variant Physical-Properties of Liquefied Petroleum Gas
FEDSM 2017; V01AT04A005https://doi.org/10.1115/FEDSM2017-69147
Topics:
Petroleum
,
Pumps
,
Density
,
Computational fluid dynamics
,
Temperature
,
Computer software
,
Dimensional analysis
,
Engineering simulation
,
Heat
,
Heat exchangers
Parametrization of High-Speed Train Streamline Shape
FEDSM 2017; V01AT04A006https://doi.org/10.1115/FEDSM2017-69167
Topics:
Shapes
,
Trains
,
Design
,
Optimization
,
Aerodynamic noise
,
China
,
Deformation
,
Modeling
,
Pressure
,
Shape optimization
Modeling Sealing in Transient Injector Simulations
FEDSM 2017; V01AT04A009https://doi.org/10.1115/FEDSM2017-69309
Topics:
Ejectors
,
Modeling
,
Sealing (Process)
,
Simulation
,
Transients (Dynamics)
,
Emissions
,
Valves
,
Algorithms
,
Cavitation
,
Computation
The Influence of Surface Patterning on the Thermal Properties of Textured Thrust Bearings
FEDSM 2017; V01AT04A010https://doi.org/10.1115/FEDSM2017-69356
Topics:
Thermal properties
,
Thrust bearings
,
Temperature
,
Bearings
,
Texture (Materials)
,
Design
,
Friction
,
Stress
,
Computational fluid dynamics
,
Fluid films
Research on Application of 500MPa Water Cutting Composite Material
FEDSM 2017; V01AT04A011https://doi.org/10.1115/FEDSM2017-69394
Topics:
Composite materials
,
Cutting
,
Water
,
Pressure
,
Manufacturing engineering
,
Reliability
,
Structural design
,
Wings
Turbulent Flow Behaviour in a Pipe Fully Submerged in a Hot Fluid
FEDSM 2017; V01AT04A012https://doi.org/10.1115/FEDSM2017-69541
Topics:
Fluids
,
Pipes
,
Turbulence
,
Flow (Dynamics)
,
Buoyancy
,
Laminar flow
,
Heat transfer
,
Inertia (Mechanics)
,
Temperature
,
Convection
Computational Study of High Temperature Liquid Metal Infusion
Arturo Schiaffino, Ashesh Chattopadhyay, Shaikh Tanveer Hossain, Vinod Kumar, V. M. K. Kotteda, Arturo Bronson
FEDSM 2017; V01AT04A013https://doi.org/10.1115/FEDSM2017-69577
Topics:
High temperature
,
Liquid metals
,
Flow (Dynamics)
,
Metals
,
Dynamics (Mechanics)
,
Porous materials
,
Ceramics
,
Fibers
,
Manufacturing
,
Particulate matter
Numerical Study of Heat Transfer in Turbulent Cross-Flow Over Porous-Coated Cylinder
FEDSM 2017; V01AT04A014https://doi.org/10.1115/FEDSM2017-69582
Topics:
Cross-flow
,
Cylinders
,
Heat transfer
,
Turbulence
,
Metal foams
,
Flow (Dynamics)
,
Porosity
,
Porous materials
,
Algorithms
,
Eddies (Fluid dynamics)
Liquid Atomization and Spray: A Multi-Scale Description
FEDSM 2017; V01AT04A015https://doi.org/10.1115/FEDSM2017-69590
Topics:
Computer simulation
,
Dimensions
,
Elongation
,
Fractals
,
Simulation results
,
Sprays
9th International Symposium on Pumping Machinery
Cleaning Sequence Counters Clogging: A Quantitative Assessment Under Real Operation Conditions of a Wastewater Pump
FEDSM 2017; V01AT05A001https://doi.org/10.1115/FEDSM2017-69020
Topics:
Pumps
,
Sewage
,
Safety
,
Control systems
,
Failure
,
High pressure (Physics)
,
Peak load
,
Pumping stations
,
Testing
,
Textiles
The Clogging Behavior of a Vortex Pump: An Experimental Study on the Influence of Impeller Designs
FEDSM 2017; V01AT05A002https://doi.org/10.1115/FEDSM2017-69021
Topics:
Impellers
,
Pumps
,
Vortices
,
Blades
,
Textiles
,
Flow (Dynamics)
,
Design
,
Energy consumption
,
Suction
,
Water
Influence of an Adaptive Blade System on Unsteady Flow Conditions in a 2D Compressor Cascade
FEDSM 2017; V01AT05A003https://doi.org/10.1115/FEDSM2017-69028
Topics:
Blades
,
Cascades (Fluid dynamics)
,
Compressors
,
Unsteady flow
,
Stators
,
Flow (Dynamics)
,
Phase shift
,
Clearances (Engineering)
,
Design
,
Flow separation
Measured Static and Rotordynamic Characteristics of a Smooth-Stator/Grooved-Rotor Liquid Annular Seal
FEDSM 2017; V01AT05A004https://doi.org/10.1115/FEDSM2017-69036
Topics:
Rotors
,
Stators
,
Leakage
,
Pressure drop
,
Pumps
,
Stiffness
,
Clearances (Engineering)
,
Damping
,
Fluids
,
Rotordynamics
First Attempt on Numerical Prediction of Cavitation Damage on a Centrifugal Pump
FEDSM 2017; V01AT05A005https://doi.org/10.1115/FEDSM2017-69085
Topics:
Cavitation
,
Centrifugal pumps
,
Damage
,
Computational fluid dynamics
,
Blades
,
Cavitation erosion
,
Erosion
,
Flow (Dynamics)
,
Flow simulation
,
Fluid mechanics
Influence of Gas-Liquid Multiphase-Flow on Acoustic Behavior and Performance of Side Channel Pumps
FEDSM 2017; V01AT05A006https://doi.org/10.1115/FEDSM2017-69094
Topics:
Acoustics
,
Multiphase flow
,
Pumps
,
Flow (Dynamics)
,
Centrifugal pumps
,
Fluids
,
Vibration
,
Acoustic intensity
,
Impellers
,
Lasers
Transient Pressure Pulsations of a Model Pump-Turbine During Power Failure
FEDSM 2017; V01AT05A009https://doi.org/10.1115/FEDSM2017-69133
Topics:
Failure
,
Pressure
,
Pump turbines
,
Transients (Dynamics)
,
Turbines
,
Brakes
,
Flow (Dynamics)
,
Noise (Sound)
,
Pumps
,
Guide vanes
Evaluation of Effect of Viscosity on an Electrical Submersible Pump
FEDSM 2017; V01AT05A010https://doi.org/10.1115/FEDSM2017-69157
Topics:
Pumps
,
Submersibles
,
Viscosity
,
Fluids
,
Flow (Dynamics)
,
Computational fluid dynamics
,
Design
,
Impellers
,
Diffusers
,
Reynolds number
Part-Load Cavitation Instability Investigation of a High Specific Speed Pump
FEDSM 2017; V01AT05A011https://doi.org/10.1115/FEDSM2017-69159
Topics:
Cavitation
,
Pumps
,
Stress
,
Flow (Dynamics)
,
Bubbles
,
Erosion
,
Impellers
,
Noise (Sound)
,
Pressure
,
Simulation results
Experimental Investigation of Tip Cavitating Vortices in Axial-Flow Pump
FEDSM 2017; V01AT05A012https://doi.org/10.1115/FEDSM2017-69178
Topics:
Axial flow
,
Pumps
,
Vortices
,
Cavitation
,
Blades
,
Dynamics (Mechanics)
,
Flow (Dynamics)
,
Impellers
,
Trajectories (Physics)
,
Imaging
Rotor Stability Evaluation for High Pressure Multi-Stage Pump by Excitation Diagnosis Method
FEDSM 2017; V01AT05A014https://doi.org/10.1115/FEDSM2017-69191
Topics:
Excitation
,
High pressure (Physics)
,
Pumps
,
Rotors
,
Stability
,
Vibration
,
Fluids
,
Bearings
,
Clearances (Engineering)
,
Machinery
Exit Loss Model for Plain Axial Seals in Multi-Stage Centrifugal Pumps
FEDSM 2017; V01AT05A015https://doi.org/10.1115/FEDSM2017-69251
Topics:
Centrifugal pumps
,
Computational fluid dynamics
,
Pumps
,
Flow (Dynamics)
,
Leakage flows
,
Pressure drop
,
Thrust
,
Axial flow
,
Dynamic stability
,
Friction
Improvement of Suction Performance Using Splitter Impeller and Inducer
FEDSM 2017; V01AT05A016https://doi.org/10.1115/FEDSM2017-69256
Topics:
Impellers
,
Suction
,
Pumps
,
Cavitation
,
Surges
,
Flow (Dynamics)
,
Computational fluid dynamics
,
Design
,
Pressure
,
Rockets
Axial Thrust Prediction for a Multi-Stage Centrifugal Pump
FEDSM 2017; V01AT05A017https://doi.org/10.1115/FEDSM2017-69283
Topics:
Centrifugal pumps
,
Thrust
,
Computational fluid dynamics
,
Pumps
,
Impellers
,
Analytical methods
,
Bearings
,
Boundary-value problems
,
Computation
,
Computers
Investigation of the Influence of Operating Point on the Shape and Position of Textile Material in the Inlet Pipe to a Dry-Installed Wastewater Pump
Anna Lyhne Jensen, Stefan Gerlach, Flemming Lykholt-Ustrup, Henrik Sørensen, Lasse Rosendahl, Paul Uwe Thamsen
FEDSM 2017; V01AT05A018https://doi.org/10.1115/FEDSM2017-69298
Topics:
Pipes
,
Pumps
,
Sewage
,
Shapes
,
Textiles
,
Dust
,
Glass
,
Pumping stations
,
Simulation
Experimental and Numerical Investigations of a Low-Cost Axial Pump Design for the Drainage of Flooded Areas
FEDSM 2017; V01AT05A019https://doi.org/10.1115/FEDSM2017-69308
Topics:
Design
,
Drainage
,
Pumps
,
Blades
,
Computational fluid dynamics
,
Computer simulation
,
Diffusers
,
Flow (Dynamics)
,
Impellers
,
Optimization
Developing an Optimal Helix Angle As a Function of Pressure for Helical Groove Seals
FEDSM 2017; V01AT05A020https://doi.org/10.1115/FEDSM2017-69322
Topics:
Pressure
,
Flow (Dynamics)
,
Fluids
,
Simulation
,
High pressure (Physics)
,
Impellers
,
Pumps
,
Rotors
,
Stators
,
Computational fluid dynamics
Experimental Investigation on Diffuser Rotating Stall in a Three-Stage Centrifugal Pump
FEDSM 2017; V01AT05A021https://doi.org/10.1115/FEDSM2017-69386
Topics:
Centrifugal pumps
,
Diffusers
,
Flow (Dynamics)
,
Leakage
,
Rotors
,
Errors
,
Impellers
,
Leakage flows
,
Reliability
,
Suction
Improvement of Cavitation Surge in a Double Suction Centrifugal Pump by Use of CFD
FEDSM 2017; V01AT05A022https://doi.org/10.1115/FEDSM2017-69416
Topics:
Cavitation
,
Centrifugal pumps
,
Computational fluid dynamics
,
Suction
,
Surges
,
Impellers
,
Simulation
,
Flow (Dynamics)
,
Fluctuations (Physics)
,
Pump impellers
Numerical Study of One Dimensional Pipe Flow Under Pump Cavitation Surge
FEDSM 2017; V01AT05A023https://doi.org/10.1115/FEDSM2017-69427
Topics:
Cavitation
,
Pipe flow
,
Pumps
,
Surges
,
Pipes
,
Distributed parameter systems
,
Lumped parameter models
,
Equations of motion
,
Flow (Dynamics)
,
Piping systems
CFD Analysis and Experimental Comparison of a Large Centrifugal Pump
FEDSM 2017; V01AT05A024https://doi.org/10.1115/FEDSM2017-69532
Topics:
Centrifugal pumps
,
Computational fluid dynamics
,
Design
,
Flow (Dynamics)
,
Suction
,
Aerospace industry
,
Angular momentum
,
Blades
,
Diffusers
,
Energy generation
Sensitivity Analysis of Fluid Pre-Swirl and Swirl Brakes Design on the Performance of Labyrinth Seals
FEDSM 2017; V01AT05A025https://doi.org/10.1115/FEDSM2017-69537
Topics:
Brakes
,
Design
,
Fluids
,
Sensitivity analysis
,
Rotation
,
Rotors
,
Computational fluid dynamics
,
Engineering simulation
,
Experimental design
,
Fittings
CFD Simulation of a Multi-Stage Centrifugal Pump
FEDSM 2017; V01AT05A026https://doi.org/10.1115/FEDSM2017-69587
Topics:
Centrifugal pumps
,
Computational fluid dynamics
,
Simulation
,
Flow (Dynamics)
,
Computer software
,
Fluids
,
Impellers
,
Leakage
,
Pumps
,
Simulation results
Email alerts
Most Read Proceedings Papers in FEDSM
FEDSM2024 Front Matter
FEDSM2024
FEDSM2022 Front Matter
FEDSM2022