Self-piercing riveting (SPR) has drawn more attention in recent years because it can join some advanced materials that are hard to weld, such as aluminum alloy sheets. In this paper, the free torsional vibration characteristics of single lap-jointed encastre SPR beam are investigated in detail. The focus of the analysis is to reveal the influence on the torsional natural frequencies and mode shapes of the single lap-jointed encastre SPR beam of different characteristics of sheets to be jointed. Numerical examples show that the torsional natural frequencies increase significantly as the Young’s modulus of the sheets increase, but almost no change corresponding to the change in Poisson’s ratio of the sheets to be joint. The mode shapes show that there are different deformations in the jointed section of SPR beam compared with the reference encastre beam without joint. These different deformations may cause different natural frequency values and different stress distributions.
Skip Nav Destination
ASME 8th Biennial Conference on Engineering Systems Design and Analysis
July 4–7, 2006
Torino, Italy
ISBN:
0-7918-4250-9
PROCEEDINGS PAPER
Free Vibration Characteristics of SPR Joints
Xiaocong He,
Xiaocong He
University of Warwick, Coventry, UK
Search for other works by this author on:
Ian Pearson,
Ian Pearson
University of Warwick, Coventry, UK
Search for other works by this author on:
Ken Young
Ken Young
University of Warwick, Coventry, UK
Search for other works by this author on:
Xiaocong He
University of Warwick, Coventry, UK
Ian Pearson
University of Warwick, Coventry, UK
Ken Young
University of Warwick, Coventry, UK
Paper No:
ESDA2006-95219, pp. 159-167; 9 pages
Published Online:
September 5, 2008
Citation
He, X, Pearson, I, & Young, K. "Free Vibration Characteristics of SPR Joints." Proceedings of the ASME 8th Biennial Conference on Engineering Systems Design and Analysis. Volume 3: Dynamic Systems and Controls, Symposium on Design and Analysis of Advanced Structures, and Tribology. Torino, Italy. July 4–7, 2006. pp. 159-167. ASME. https://doi.org/10.1115/ESDA2006-95219
Download citation file:
7
Views
Related Proceedings Papers
Related Articles
The Influence of Geometric and Material Design Variables on the Free Vibration of Thin-Walled Composite Material Beams
J. Vib., Acoust., Stress, and Reliab (July,1989)
A New One-Sided Joining Process for Aluminum Alloys: Friction Stir Blind Riveting
J. Manuf. Sci. Eng (December,2009)
Modeling of Single-Sided Piercing Riveting Process
J. Manuf. Sci. Eng (April,2010)
Related Chapters
Transverse Free Vibration Analysis of Hybrid SPR Steel Joints
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Fundamentals of Structural Dynamics
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Factors Influencing Stage I Crack Propagation in Age-Hardened Alloys
Fatigue Mechanisms