Volumes | Engineering Systems Design and Analysis | American Society of Mechanical Engineers Digital Collection

ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis

July 12–14, 2010

Istanbul, Turkey

Conference Sponsors:

ISBN:

978-0-7918-4916-3

In This Volume

Applied Mechanics (51)
Heat Transfer (42)
Science, Engineering and Education (8)

ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Volume 2

Applied Mechanics

Fundamental Frequency Optimization of Angle-Ply Laminated Plates Using Elitist-Genetic Algorithm and Finite Strip Method

Mohammad Homayoun Sadr, Hadi Ghashochi Bargh

ESDA 2010; 1-10doi:https://doi.org/10.1115/ESDA2010-24007

Abstract

View Article

PDF

Topics: Algorithms , Finite strip method , Optimization , Plates (structures) , Composite materials , Design , Economics , Fibers , Genetic algorithms , Plate theory

An Effect of Plastic Anisotropy on the Strain Rate Intensity Factor

Sergei Alexandrov

ESDA 2010; 11-15doi:https://doi.org/10.1115/ESDA2010-24021

Abstract

View Article

PDF

Topics: Anisotropy , Friction , Deformation , Materials properties , Plane strain , Plasticity , Solids , Stress

Parallel Mechanism for Precision Sun Tracking

Stefano Mauro, Cristina Scarzella

ESDA 2010; 17-22doi:https://doi.org/10.1115/ESDA2010-24100

Abstract

View Article

PDF

Topics: Clearances (Engineering) , Design , Errors , Kinematics , Machinery , Parallel mechanisms , Radiation (Physics) , Solar energy

The Dynamical Behavior of Y-Shaped Tubes Conveying Fluid

Ahmed A. Al-Rajihy, Hazim U. Alwan

ESDA 2010; 23-27doi:https://doi.org/10.1115/ESDA2010-24101

Abstract

View Article

PDF

Topics: Fluids , Boundary-value problems , Dynamics (Mechanics) , Flow (Dynamics) , Fluid dynamics , Junctions , Stability

On Shear Correction Factor in Vibration of Annular Sector Plates

F. Hejripour, A. R. Saidi, S. H. Mirtalaie

ESDA 2010; 29-38doi:https://doi.org/10.1115/ESDA2010-24106

Abstract

View Article

PDF

Topics: Plates (structures) , Shear (Mechanics) , Vibration

Bending Analysis of Thin Skew Plates Using Extended Kantorovich Method

M. H. Kargarnovin, A. Joodaky

ESDA 2010; 39-44doi:https://doi.org/10.1115/ESDA2010-24138

Abstract

View Article

PDF

Topics: Plates (structures) , Deflection , Stress , Differential equations , Finite element analysis , Galerkin method , Numerical analysis , Partial differential equations

Exact Electroelastic Field of a Functionally Graded Piezoelectric Cantilever Beam Subjected to Pure Body Force Loading

A. A. Emami, R. Hashemi, M. H. Kargarnovin, R. Naghdabadi

ESDA 2010; 45-52doi:https://doi.org/10.1115/ESDA2010-24139

Abstract

View Article

PDF

Topics: Cantilever beams , Materials properties , Boundary-value problems , Differential equations , Electromagnetic induction , Partial differential equations , Stress

Weak Radiator Design Using Dimples

Wen Nan Cheng, Chih Chun Cheng, Gary H. Koopmann

ESDA 2010; 53-59doi:https://doi.org/10.1115/ESDA2010-24188

Abstract

View Article

PDF

Topics: Design , Design methodology , Finite element methods , Modal assurance criterion , Optimization , Radiation (Physics) , Shapes , Sound , Vibration

Numerical and Experimental Studies of High Strain Rate Mechanical Behavior of E-Glass/Polyester Composite Laminates

Gozde Tunusoglu, Alper Tasdemirci, Mustafa Guden, I. W. Hall

ESDA 2010; 61-68doi:https://doi.org/10.1115/ESDA2010-24190

Abstract

View Article

PDF

Topics: Composite materials , Glass , Laminates , Mechanical behavior , Polyester fabrics , Computer simulation , Failure , Fracture (Materials) , Fracture (Process) , Compression

Fatigue Life Improvement of Antiroll Bar Bracket Used in Heavy Truck Suspension

Ali Cinar, Kader Senocak

ESDA 2010; 69-72doi:https://doi.org/10.1115/ESDA2010-24202

Abstract

View Article

PDF

Topics: Fatigue life , Trucks , Stress , Design , Finite element analysis , Testing , Computer-aided engineering , Automotive industry , Engineering prototypes , Manufacturing

Stamina of a Gasketed Flange Joint Under Combined Internal Pressure and Axial Loading

Muhammad Abid, Niaz Bahadur Khan

ESDA 2010; 73-80doi:https://doi.org/10.1115/ESDA2010-24206

Abstract

View Article

PDF

Topics: Flanges , Pressure , Sealing (Process) , Bolted flanges , Design , Ignorance , Stress

On the Axisymmetric Torsional Wave Dispersion and Its Controlling in the Finitely Pre-Stretched Bi-Material Compound Circular Cylinder

Tamer Kepceler, M. Mert Egilmez

ESDA 2010; 81-89doi:https://doi.org/10.1115/ESDA2010-24219

Abstract

View Article

PDF

Topics: Circular cylinders , Cylinders , Dispersion (Optics) , Wave propagation , Elastic waves , Waves

On Some Particularities of the Axisymmetric Wave Propagation in the Initially Twisted Circular Compound Cylinders

Surkay Akbarov, Mugan Guliev, Tamer Kepceler

ESDA 2010; 91-98doi:https://doi.org/10.1115/ESDA2010-24230

Abstract

View Article

PDF

Topics: Cylinders , Wave propagation

Large Deflection of a Non-Linear, Elastic, Asymmetric Ludwick Cantilever Beam

Alberto Borboni, Diego De Santis, Rodolfo Faglia

ESDA 2010; 99-106doi:https://doi.org/10.1115/ESDA2010-24257

Abstract

View Article

PDF

Topics: Cantilever beams , Deflection

3-D Free Vibration Analysis of Functionally Graded Thick Circular and Annular Plates on Elastic Foundation

Vahid Tajeddini, Abdolreza Ohadi, Mojtaba Sadighi

ESDA 2010; 107-115doi:https://doi.org/10.1115/ESDA2010-24340

Abstract

View Article

PDF

Topics: Free vibrations , Plates (structures) , Boundary-value problems , Eigenvalues , Elasticity , Kinematics , Materials properties , Polynomials , Potential energy

On the Stress Singularities and Boundary Layer in Moderately Thick Functionally Graded Sectorial Plates

A. R. Saidi, F. Hejripour, E. Jomehzadeh

ESDA 2010; 117-126doi:https://doi.org/10.1115/ESDA2010-24395

Abstract

View Article

PDF

Topics: Boundary layers , Plates (structures) , Stress singularity

On Measuring Dynamic Properties of Damping Materials Using Oberst Beam Method

Hasan Koruk, Kenan Y. Sanliturk

ESDA 2010; 127-134doi:https://doi.org/10.1115/ESDA2010-24452

Abstract

View Article

PDF

Topics: Damping , Excitation , Materials properties , Aluminum , Cantilever beams , Mechanical properties , Sensors , Steel , Transducers

Numerical Simulation of Elastic and Thermoelastic Wave Propagation in Two-Dimensional Classical and Generalized Coupled Thermoelasticity

S. K. Hosseini zad, A. Komeili, A. H. Akbarzadeh, M. R. Eslami

ESDA 2010; 135-145doi:https://doi.org/10.1115/ESDA2010-24575

Abstract

View Article

PDF

Topics: Computer simulation , Thermoelasticity , Wave propagation , Displacement , Stress , Temperature , Waves , Algorithms , Boundary-value problems , Finite element analysis

On the Avoidance of Friction Induced Vibrations by Structural Optimization

Gottfried Spelsberg-Korspeter

ESDA 2010; 147-152doi:https://doi.org/10.1115/ESDA2010-24576

Abstract

View Article

PDF

Topics: Friction , Structural optimization , Vibration , Rotors , Brakes , Design , Damping , Disks , Rollers , Stability

The Effect of Fiber Arrangement on Stress Concentration Around a Pin in a Laminated Composite Joint

Mohammad Shishesaz, Mohammad Mehdi Attar, Hosein Robati

ESDA 2010; 153-161doi:https://doi.org/10.1115/ESDA2010-24587

Abstract

View Article

PDF

Topics: Composite materials , Fibers , Stress concentration , Laminates , Equilibrium (Physics) , Shear stress , Stress , Displacement , Shear (Mechanics)

Buckling Analysis of Thin Functionally Graded Rectangular Plates Resting on Elastic Foundation

Meisam Mohammadi, A. R. Saidi, Mehdi Mohammadi

ESDA 2010; 163-170doi:https://doi.org/10.1115/ESDA2010-24594

Abstract

View Article

PDF

Topics: Buckling , Plates (structures) , Boundary-value problems , Functionally graded materials , Stress , Plate theory , Equilibrium (Physics) , Load bearing capacity , Potential energy , Stability

Fatigue Reliability Assessment of Marine Risers in Deep Offshore Fields in Indian Ocean

Rizwan A. Khan, Suhail Ahmad

ESDA 2010; 171-181doi:https://doi.org/10.1115/ESDA2010-24680

Abstract

View Article

PDF

Topics: Fatigue , Indian Ocean , Marine drilling risers , Ocean engineering , Reliability , Fracture (Materials) , Fatigue cracks , Pipeline risers , Risers (Casting) , Seas

A Study on the Buckling Characteristics of Conical Shell Using Differential Quadrature Method

E. Jomehzadeh, S. H. Mirtalaie, H. Noori

ESDA 2010; 183-192doi:https://doi.org/10.1115/ESDA2010-24685

Abstract

View Article

PDF

Topics: Buckling , Shells , Boundary-value problems , Compression , Equilibrium (Physics) , Pressure , Stability , Degrees of freedom , Hamilton's principle , Stress

Buckling Delamination of the Rectangular Orthotropic Thick Plate With an Edge Rectangular Crack

Surkay Akbarov, Nazmiye Yahnioglu, Esra Eylem Karatas

ESDA 2010; 193-200doi:https://doi.org/10.1115/ESDA2010-24705

Abstract

View Article

PDF

Topics: Buckling , Delamination , Finite element methods , Finite element model , Fracture (Materials)

Mechanical Design and Analysis of an Intelligent Oil Well Sensory System

Atefeh Salmasi, Aghil Yousefi-Koma, Mohammad Hossein Soorgee

ESDA 2010; 201-205doi:https://doi.org/10.1115/ESDA2010-24713

Abstract

View Article

PDF

Topics: Design engineering , Oil wells , Temperature , Pressure , Reservoirs , Control systems , Design , Fiber optic sensors , Fibers , Finite element analysis

The Performance of Bolted Slant Endplate Connections Subjected to Temperature Increase

F. Zahmatkesh, E. Talebi

ESDA 2010; 207-217doi:https://doi.org/10.1115/ESDA2010-24720

Abstract

View Article

PDF

Topics: Temperature

Theoretical and Experimental Crushing Analysis of Metal Square Honeycombs Under Quasi-Static Loading

M. Zarei Mahmoudabadi, M. Sadighi, A. Eyvazian

ESDA 2010; 219-226doi:https://doi.org/10.1115/ESDA2010-24739

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Honeycomb structures , Metals , Stress

How Geometrical Tolerances Affect the Measurement of Reciprocal Alignment of Two Different Assemblies: A Case Study

David Vetturi, Matteo Lancini, Ileana Bodini

ESDA 2010; 227-232doi:https://doi.org/10.1115/ESDA2010-24759

Abstract

View Article

PDF

Topics: Chain , Computer simulation , Coordinate measuring machines , Design , Displacement , Manufacturing , Measurement uncertainty , Monte Carlo methods , Sensitivity analysis , Uncertainty

Experimental Study of Corrugated Tubes Under Lateral Loading

A. Eyvazian, M. Shakeri, M. Zarei Mahmoudabadi

ESDA 2010; 233-241doi:https://doi.org/10.1115/ESDA2010-24782

Abstract

View Article

PDF

Topics: Absorption , Aluminum tube , Compression , Deflection , Deformation , Design , Geometry , Metal stamping , Vehicles , Wavelength

Buckling Delamination of a Rectangular Sandwich Thick Plate With Band Cracks

Surkay Akbarov, Nazmiye Yahnioglu, Ayfer Tekin

ESDA 2010; 243-251doi:https://doi.org/10.1115/ESDA2010-24807

Abstract

View Article

PDF

Topics: Buckling , Delamination , Finite element methods , Finite element model , Fracture (Materials)

Bifurcation Analysis for Brake Squeal

Hartmut Hetzler

ESDA 2010; 253-262doi:https://doi.org/10.1115/ESDA2010-24814

Abstract

View Article

PDF

Topics: Bifurcation , Brakes , Computer software , Disks , Linear systems , Sliding friction , Tribology , Vibration equipment

An Optimal Parameters Determination for Ferroelectric’s Polarization Model

A. Scaliukh, A. Soloviev, E. Dmitrieva, M. Shevtsova

ESDA 2010; 263-269doi:https://doi.org/10.1115/ESDA2010-24841

Abstract

View Article

PDF

Topics: Polarization (Electricity) , Polarization (Light) , Polarization (Waves) , Actuators , Electric fields , Ferroelectric crystals , Sensors , Finite element analysis , Algorithms , Capacitors

Coupled Axial-Flexural-Torsional Vibration of Internally Damped Timoshenko Frames

Adil Yucel, Alaeddin Arpaci, Ekrem Tufekci

ESDA 2010; 271-278doi:https://doi.org/10.1115/ESDA2010-24861

Abstract

View Article

PDF

Topics: Vibration , Damping , Bridges (Structures) , Cross section (Physics) , Elastic moduli , Finite element analysis , Modal analysis , Rotational inertia , Shear (Mechanics) , Ships

Structural Analysis of Riveted Structures Using a New FE Modelling Technique

Michele Ferracci, Francesco Vivio, Vincenzo Vullo

ESDA 2010; 279-285doi:https://doi.org/10.1115/ESDA2010-24875

Abstract

View Article

PDF

Topics: Degrees of freedom , Fatigue , Finite element analysis , Finite element model , Modeling , Rivets , Simulation , Stiffness , Stress , Structural analysis

Vibration Analysis of Rectangular Functionally Graded Plate Bonded With PZT5 Sensor/Actuator

M. H. Kargarnovin, N. S. Viliani

ESDA 2010; 287-294doi:https://doi.org/10.1115/ESDA2010-24906

Abstract

View Article

PDF

Topics: Actuators , Sensors , Vibration analysis , Feedback , Flamelet generated manifold , Functionally graded materials , Deflection , Differential equations , Displacement , Electric charge

Improvement of Cyclic Strength of Carbon Steel by Various Surface Treatments

Antanas Ciuplys

ESDA 2010; 295-298doi:https://doi.org/10.1115/ESDA2010-24972

Abstract

View Article

PDF

Topics: Carbon steel , Surface finishing , Fatigue strength , Surface hardening , Currents , Durability , Failure , Fatigue cracks , Hardening , Heating and cooling

Mechanical Assessment of Maglev Vehicle: A Proposal for Implementing Maglev Trains in Iran

Hamid Yaghoubi, M. Sadat Hoseini

ESDA 2010; 299-306doi:https://doi.org/10.1115/ESDA2010-25003

Abstract

View Article

PDF

Topics: Magnetic levitation , Trains , Vehicles , Design , Suspension systems , Railroads , Dynamic testing (Materials) , Dynamics (Mechanics) , Electronics , Finite element methods

Dynamic Stability of a Spinning Timoshenko Beam Subjected to a Moving Mass-Spring-Damper Unit

T. H. Young, M. S. Chen

ESDA 2010; 307-315doi:https://doi.org/10.1115/ESDA2010-25021

Abstract

View Article

PDF

Topics: Dampers , Dynamic stability , Spin (Aerodynamics) , Spinning (Textile) , Springs , Equations of motion , Displacement , Excitation , Galerkin method , Modal analysis

Experimental and Numerical Analysis of Fatigue Properties Improvement in a Titanium Alloy by Shot Peening

Sara Bagherifard, Marco Giglio, Lorenzo Giudici, Mario Guagliano

ESDA 2010; 317-322doi:https://doi.org/10.1115/ESDA2010-25030

Abstract

View Article

PDF

Topics: Fatigue properties , Fatigue strength , Numerical analysis , Residual stresses , Shot peening , Titanium alloys

Improving Performance of an Artificial Neural Network Based Gearbox Fault Diagnosis System

Ali Hajnayeb, Ahmad Ghasemloonia, Siamak Esmaeelzadeh Khadem, Mohammad Hasan Moradi

ESDA 2010; 323-328doi:https://doi.org/10.1115/ESDA2010-25087

Abstract

View Article

PDF

Topics: Artificial neural networks , Fault diagnosis , Mechanical drives , Gears , Vibration , Signals , Condition monitoring , Errors , Feature selection , Flaw detection

On Active Diagnostics Method for Assessment of Technical Condition of Nuclear Facility Components

Yury Spirochkin, Igor Odintsev, Roman Atroshenkov

ESDA 2010; 329-334doi:https://doi.org/10.1115/ESDA2010-25089

Abstract

View Article

PDF

Topics: Design , Dimensions , Finite element methods , Fracture (Materials) , Geometry , Nuclear power stations , Numerical analysis , Oscillations , Pipelines , Pipes

Study of the Burn-Through During In-Service Welding of T Joint Branch Connections

A. H. Daei-Sorkhabi, M. A. Saeimi-Sadigh, F. Vakili-Tahami, M. Zehsaz, B. Behjat

ESDA 2010; 335-344doi:https://doi.org/10.1115/ESDA2010-25113

Abstract

View Article

PDF

Topics: Welding , Pipes , Risk , Flow (Dynamics) , Steam , Thermomechanics , American Petroleum Institute , Computer simulation , Cooling , Cracking (Materials)

An Analytical Study to Free Vibration Control of Composite Beams With Piezoelectric Layers Based on First Order Shear Deformation Theory

Ali Abbaszadeh Bidokhti

ESDA 2010; 345-350doi:https://doi.org/10.1115/ESDA2010-25193

Abstract

View Article

PDF

Topics: Composite building materials , Free vibrations , Shear deformation , Actuators , Algorithms , Damping , Dynamic response , Feedback , Finite element analysis , Finite element model

Stress Analysis of an Isotropic Plate Containing Three Aligned Circular Holes Under In-Plane Symmetric Loading

Ghazi H. Asmar, Elie A. Chakar

ESDA 2010; 351-358doi:https://doi.org/10.1115/ESDA2010-25213

Abstract

View Article

PDF

Topics: Finite element analysis , Stress , Stress analysis (Engineering) , Tension

A Method for Thermal Loading Design to Reduce Stresses

H. Soltani, M. R. Hematiyan, K. Jafarpur

ESDA 2010; 359-364doi:https://doi.org/10.1115/ESDA2010-25218

Abstract

View Article

PDF

Topics: Design , Stress

Dynamic Analysis of Surface Scanning for Tactile Perception

Ramona Fagiani, Francesco Massi, Eric Chatelet, Yves Berthier

ESDA 2010; 365-373doi:https://doi.org/10.1115/ESDA2010-25246

Abstract

View Article

PDF

Topics: Dynamic analysis , Friction , Surface roughness , Vibration , Vibrational spectra , Brain , Skin , Spectra (Spectroscopy) , Stress , Dynamics (Mechanics)

Dynamics of Rupture at Frictional Rough Interfaces During Sliding Initiation

Mariano Di Bartolomeo, Francesco Massi, Anissa Meziane, Laurent Baillet, Antonio Culla

ESDA 2010; 375-384doi:https://doi.org/10.1115/ESDA2010-25247

Abstract

View Article

PDF

Topics: Dynamics (Mechanics) , Rupture , Surface roughness , Waves , Wave propagation , Shear (Mechanics) , Solids , Stress , Coulombs , Dimensions

Experimental and Numerical Investigation of Grooved Thin-Walled Steel Cylinders Under Axial Compression

Arshia Pakizehkar, Mirhamed Sarkarfarshi, Abolfazl Masomi

ESDA 2010; 385-391doi:https://doi.org/10.1115/ESDA2010-25248

Abstract

View Article

PDF

Topics: Buckling , Compression , Cylinders , Finite element model , Steel , Stress , Displacement , Peak load , Absorption , Computer software

The Effect of Drilling Mud on Nonlinear Instability Threshold of Drill String

Ali Asghar Jafari, Reza Kazemi, Mohammad Faraji Mahyari

ESDA 2010; 393-402doi:https://doi.org/10.1115/ESDA2010-25249

Abstract

View Article

PDF

Topics: Drill strings , Drilling , Potential energy , Drills (Tools) , Finite element methods , Flow (Dynamics) , Flutter (Aerodynamics) , Vibration

Analysis of Spatial Steady-State Vibrations of a Layered Anisotropic Plate Using the Green’s Functions

Alexander Karmazin, Evgenia Kirillova, Wolfgang Seemann, Pavel Syromyatnikov

ESDA 2010; 403-410doi:https://doi.org/10.1115/ESDA2010-25430

Abstract

View Article

PDF

Topics: Anisotropy , Steady state , Vibration , Fourier transforms , Algorithms , Displacement , Composite materials , Poles (Building) , Stress , Symmetry (Physics)

Does a Predictive Minimal Model of Friction-Induced Vibration Exist?

Tore Butlin, Jim Woodhouse

ESDA 2010; 411-419doi:https://doi.org/10.1115/ESDA2010-25450

Abstract

View Article

PDF

Topics: Friction , Vibration , Approximation , Complex systems , Damping , Disks

Heat Transfer

Experimental Investigation of Thermal Performance of Vapor Chamber Heat Sinks

Hung-Yi Li, Ming-Hung Chiang, Chih-I Lee, Wen-Jei Yang

ESDA 2010; 421-425doi:https://doi.org/10.1115/ESDA2010-24018

Abstract

View Article

PDF

Topics: Heat sinks , Vapors , Reynolds number , Aluminum , Dimensions , Heat , Temperature , Thermal resistance , Thermography

Experimental Study of Free Convection Heat Transfer From a Fin Attached Cylinder Confined Between Tilt and Low Conductive Plates

Amir Abbas Rezaei, Masoud Ziabasharhagh, Tooraj Yousefi, Mehran Ahmadi

ESDA 2010; 427-431doi:https://doi.org/10.1115/ESDA2010-24070

Abstract

View Article

PDF

Topics: Cylinders , Heat transfer , Natural convection , Plates (structures)

Laminar Mixed Convection in Horizontal Concentric Annuli With Four Porous Blocks Attached on the Outside of the Inner Cylinder

Yacine Ould-Amer

ESDA 2010; 433-442doi:https://doi.org/10.1115/ESDA2010-24077

Abstract

View Article

PDF

Topics: Annulus , Cylinders , Mixed convection

Experimental Study on the Heat Transfer Under Impinging Jet Array Using Liquid Crystal Thermograph

Han-Chieh Chiu, Jer-Huan Jang, Wei-Mon Yan

ESDA 2010; 443-451doi:https://doi.org/10.1115/ESDA2010-24115

Abstract

View Article

PDF

Topics: Heat transfer , Liquid crystals , Reynolds number , Geometry , Plates (structures)

Influence of Ambient Air Velocity Orientation in Thermal Behaviour of Open Refrigerated Display Cabinets

Pedro Dinis Gaspar, L. C. Carrilho Gonc¸alves, Xiao Ge

ESDA 2010; 453-462doi:https://doi.org/10.1115/ESDA2010-24124

Abstract

View Article

PDF

Topics: Air conditioning , Air flow , Boundary-value problems , Computational fluid dynamics , Flow (Dynamics) , Heat transfer , Modeling , Oscillations , Pressure , Temperature

An Experimental Study on the Effect of Partition Angle on Free Convection Heat Transfer in a Partition Cavity by Laser Interferometry Method

Tooraj Yousefi, Sajjad Mahmoodi Nezhad, Masood Bigharaz, Saeed Ebrahimi

ESDA 2010; 463-468doi:https://doi.org/10.1115/ESDA2010-24144

Abstract

View Article

PDF

Topics: Cavities , Heat transfer , Interferometry , Lasers , Natural convection

Natural Convective Characteristics of an Oblique Heat Source Module in the Closed and Ventilated Cabinets

Yeong-Ley Tsay, Jen-Chieh Cheng, Yong-Lin Zhuang

ESDA 2010; 469-476doi:https://doi.org/10.1115/ESDA2010-24154

Abstract

View Article

PDF

Topics: Heat , Temperature , Vents , Computation , Construction , Cooling , Heat conduction , Heat transfer , Natural convection , Numerical analysis

Heat Transfer Measurements of Compact High Power LED Illumination Cooled by Different Fluids

Rong-Yuan Jou

ESDA 2010; 477-486doi:https://doi.org/10.1115/ESDA2010-24196

Abstract

View Article

PDF

Topics: Cooling , Fluids , Heat transfer , Light-emitting diodes , Temperature , Design , Errors , Heat sinks , Natural convection , Silicones

Study of the Freezing Chuck for Non-Traditional Clamping Applications

Rong-Yuan Jou

ESDA 2010; 487-496doi:https://doi.org/10.1115/ESDA2010-24197

Abstract

View Article

PDF

Topics: Freezing , Heat transfer , Thermoelectric coolers , Temperature , Coolants , Computer simulation , Flow (Dynamics) , Temperature distribution , Transients (Dynamics) , Channel flow

Numerical Simulation of One-Dimensional Hyperbolic Heat Conduction Equation in Longitudinal Fins With Different Profiles

Keivan Bamdad Masouleh, Hossein Ahmadikia, Aziz Azimi

ESDA 2010; 497-503doi:https://doi.org/10.1115/ESDA2010-24218

Abstract

View Article

PDF

Topics: Computer simulation , Fins , Heat conduction , Temperature , Oscillations , Temperature distribution , Finite difference methods , Heat , Relaxation (Physics) , Waves

The Effect of Triangular Vortex Generators on Turbulent Flow and Heat Transfer in a Channel

Hosseinali Soltanipour, Iraj Mirzaei, Parisa Choupani

ESDA 2010; 505-510doi:https://doi.org/10.1115/ESDA2010-24240

Abstract

View Article

PDF

Topics: Generators , Heat transfer , Turbulence , Vortices

Development of a Computer Program for the Numerical Investigation of Heat Transfer in a Gasketed Plate Heat Exchanger

Gizem Gulben, Selin Aradag, Nilay Sezer-Uzol, Ufuk Atamturk

ESDA 2010; 511-517doi:https://doi.org/10.1115/ESDA2010-24269

Abstract

View Article

PDF

Topics: Computer software , Friction , Heat exchangers , Heat transfer

An Experimental Investigation of Forced Convection Heat Transfer From an Isothermal V-Shaped Plate

Tooraj Yousefi, Saeed Ebrahimi, Masood Bigharaz, Sajjad Mahmoodi Nezhad

ESDA 2010; 519-524doi:https://doi.org/10.1115/ESDA2010-24353

Abstract

View Article

PDF

Topics: Forced convection , Heat transfer , Interferometers , Jets , Nozzles , Rayleigh number , Reynolds number

Impinging Jet Cooling Optimization for Obtaining Uniform Heat Flux

Farshad Kowsary, Hamed Gholamian, Mehran Rajaeeian Hoonejani

ESDA 2010; 525-533doi:https://doi.org/10.1115/ESDA2010-24362

Abstract

View Article

PDF

Topics: Cooling , Heat flux , Optimization , Jets , Heat transfer , Temperature , Design , Finite volume methods , Flat plates , Reynolds number

Second Law Analysis of Fully Developed Convection in a Helical Coiled Tube Under Constant Wall Temperature Using a CFD-ANN Approach

Mostafa Emami, Mohammad H. Rahimian, Saeed Alem Varzane Esfehani

ESDA 2010; 535-540doi:https://doi.org/10.1115/ESDA2010-24402

Abstract

View Article

PDF

Topics: Artificial neural networks , Computational fluid dynamics , Convection , Wall temperature , Entropy , Optimization , Trains , Reynolds number , Architecture , Computer simulation

Natural Convection-Radiation Heat Transfer in Rectangular Cavity With the Presence of Participating Media

Behnam Moghadassian, Farshad Kowsary, Hamed Gholamian

ESDA 2010; 541-549doi:https://doi.org/10.1115/ESDA2010-24416

Abstract

View Article

PDF

Topics: Cavities , Convection , Heat transfer , Radiation (Physics)

Integrated Numerical and Experimental Study on the Thermal Management for LED Daytime Running Lamp

Sheam-Chyun Lin, Ming-Chou Shen, Kuang-Ting Cheng, Jin-Tsing Hong, Hsien-Chang Shih

ESDA 2010; 551-560doi:https://doi.org/10.1115/ESDA2010-24441

Abstract

View Article

PDF

Topics: Thermal management , Temperature , Design , Computational fluid dynamics , Heat , Junctions , Radiation (Physics) , Safety , Simulation , Alloys

Coherent Flame Model to Predict Formation Pollutants in Turbulent Premixed Flame

Abdelhalim Bentebbiche, Denis Veynante

ESDA 2010; 561-566doi:https://doi.org/10.1115/ESDA2010-24466

Abstract

View Article

PDF

Topics: Flames , Pollution , Turbulence , Gases , Carbon dioxide , Chemically reactive flow , Computer simulation , Density , Dynamics (Mechanics) , Emissions

Estimation of the Heat Generation in a Cutting Tool Using a Sequential Inverse Method

Forooza Samadi, Farshad Kowsary, Mohsen Hamedi, Araz Sarchami

ESDA 2010; 567-572doi:https://doi.org/10.1115/ESDA2010-24467

Abstract

View Article

PDF

Topics: Cutting tools , Heat , Heat flux , Heat conduction , Algorithms , Computer software , Cutting , Geometric modeling , Mesh generation , Modeling

Experimental Investigation on the Heat Transfer of a Portable Forced-Convection Solar Air Heater

Mohammad Fakoor Pakdaman, Pejman Zohorian Izadi, Mohammad Javadinia Azari, Amir Lashkari

ESDA 2010; 573-582doi:https://doi.org/10.1115/ESDA2010-24476

Abstract

View Article

PDF

Topics: Forced convection , Heat transfer , Solar energy , Ducts , Air flow , Flat plates , Flow (Dynamics) , Reynolds number , Temperature , Thermal efficiency

Experimental Analysis of Internal Heat Exchanger for Automotive A/C System

Salman Bahrami, Hasan Mohammad Beigi, Mohammad Hosein Sabour

ESDA 2010; 583-590doi:https://doi.org/10.1115/ESDA2010-24485

Abstract

View Article

PDF

Topics: Experimental analysis , Heat exchangers , Condensers (steam plant) , Flow (Dynamics) , Compressors , Energy consumption , Temperature , Air conditioning , Design , High pressure (Physics)

Experimental and Numerical Analysis of Carbon Black Formation in Hydrocarbon/Air Diffusion Flames

D. F. Heravi, H. M. Heravi, K. Bashirnezhad, Hassan Sanaei, Amirhomayun Samiee

ESDA 2010; 591-599doi:https://doi.org/10.1115/ESDA2010-24493

Abstract

View Article

PDF

Topics: Carbon black pigments , Diffusion flames , Numerical analysis , Feedstock , Soot , Temperature , Flow (Dynamics) , Furnaces , Combustion , Fuels

Effect of Viscous Dissipation on Heat Transfer Between Two Concentric Cylinders for Carreau Fluids

Meriem Amoura, Noureddine Zeraibi

ESDA 2010; 601-606doi:https://doi.org/10.1115/ESDA2010-24544

Abstract

View Article

PDF

Topics: Cylinders , Energy dissipation , Fluids , Heat transfer , Boundary-value problems , Finite element analysis , Flow (Dynamics) , Non-Newtonian fluids , Reynolds number , Rheology

Thermally Developing 3D Cross Flow Between Cross Corrugated Parallel Plates in Evaporative Coolers

Ehsan Tavakoli, Reza Hosseini

ESDA 2010; 607-614doi:https://doi.org/10.1115/ESDA2010-24570

Abstract

View Article

PDF

Topics: Coolers , Cross-flow , Plates (structures) , Flow (Dynamics) , Pressure drop , Evaporation , Geometry , Modeling , Numerical analysis , Reynolds number

Application of Modified Discrete Ordinates Method With the Concept of Blocked-Off Region Method to Radiative Heat Transfer Problems in Irregular Geometries

H. Amiri, S. H. Mansouri, A. Safavinejad

ESDA 2010; 615-625doi:https://doi.org/10.1115/ESDA2010-24651

Abstract

View Article

PDF

Topics: Radiative heat transfer , Algorithms , Radiation (Physics) , Anisotropy , Boundary-value problems , Electromagnetic scattering , Equilibrium (Physics) , Heat flux , Radiation scattering , Scattering (Physics)

Numerical Simulation of Turbulent Heat Transfer on a Rotating Disk With an Impinging Jet

M. H. Saidi, H. Karrabi, H. B. Avval, A. Asgarshamsi

ESDA 2010; 627-631doi:https://doi.org/10.1115/ESDA2010-24661

Abstract

View Article

PDF

Topics: Computer simulation , Rotating disks , Turbulent heat transfer , Disks , Convection , Cooling , Temperature , Turbulence , Flow (Dynamics) , Fluid dynamics

Application of Modified Discrete Ordinate Method to Combined Conductive and Radiative Heat Transfer Problems in Irregular Geometry

H. Amiri, S. H. Mansouri, A. Safavinejad

ESDA 2010; 633-642doi:https://doi.org/10.1115/ESDA2010-24687

Abstract

View Article

PDF

Topics: Geometry , Radiative heat transfer , Boundary-value problems , Electromagnetic scattering , Finite volume methods , Heat , Heat transfer , Radiation scattering , Scattering (Physics) , Temperature

Comparison of Gasketed Plate Heat Exchangers With Double Pipe Heat Exchangers

Cankur Firat Cetinbas, Burak Ahmet Tuna, Cevat Akin, Selin Aradag, Nilay Sezer Uzol

ESDA 2010; 643-651doi:https://doi.org/10.1115/ESDA2010-24712

Abstract

View Article

PDF

Topics: Heat exchangers , Pipes

Heat Transfer on Parallel Plate Heat Exchangers in an Oscillatory Flow

Xiaoan Mao, Lei Shi, Artur J. Jaworski, Wasan Kamsanam

ESDA 2010; 653-661doi:https://doi.org/10.1115/ESDA2010-24760

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Heat exchangers , Heat transfer , Acoustics , Fins , Temperature , Excitation , Heat , Heat transfer coefficients , Plates (structures)

Parametric Study of an Innovative Counter-Flow Heat Exchanger

Luciano Andrea Catalano, Fabio De Bellis, Riccardo Amirante

ESDA 2010; 663-670doi:https://doi.org/10.1115/ESDA2010-24820

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Heat exchangers , Particulate matter , Pipes , Sands , Computation , Design , Gas flow , Heat , Heat transfer

On the Use of POD-Models for Convective Flow in a Grooved Channel

Sertac Cadirci, Hasan Gunes

ESDA 2010; 671-677doi:https://doi.org/10.1115/ESDA2010-24892

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Databases , Design , Heat , Temperature , Air flow , Boundary-value problems , Geometry , Heat flux , Heat transfer

The Two Phase Jet Use for Surroundings Changes in Semi-Open Space

Alexandru Chisacof, Valeriu Panaitescu, Dragos¸ Pavel, Mihai Poenaru

ESDA 2010; 679-686doi:https://doi.org/10.1115/ESDA2010-24961

Abstract

View Article

PDF

Topics: Absorption , Dimensions , Drops , Evaporation , Fire , Flames , Heat , Ignition , Oxygen , Superheating

Investigation of Heat Transfer Over a Rotating Disk in Case of Temperature and Velocity Jump Conditions by Using Differential Transform Method

A. Y. Gunes, G. Komurgoz, A. Arikoglu, I. Ozkol

ESDA 2010; 687-693doi:https://doi.org/10.1115/ESDA2010-25042

Abstract

View Article

PDF

Topics: Heat transfer , Rotating disks , Temperature , Flow (Dynamics) , Knudsen number , Differential equations , Disks , Energy consumption , Engineering systems and industry applications , Fluid dynamics

3D Thermal Analysis of a Power Supply Busbar Structure

Adrian Plesca, Alina Scintee

ESDA 2010; 695-702doi:https://doi.org/10.1115/ESDA2010-25080

Abstract

View Article

PDF

Topics: Thermal analysis , Circuit breakers , Transients (Dynamics) , Computer software , Design , Engineering simulation , Finite element methods , Heat , Heat conduction , Modeling

Non-Isothermal Fluid Flow in a Continuous Casting Tundish

Amel F. Boudjabi, Ahmed Bellaouar, Mohammed Lachi, Nadim El Wakil

ESDA 2010; 703-710doi:https://doi.org/10.1115/ESDA2010-25173

Abstract

View Article

PDF

Topics: Casting , Fluid dynamics , Heat transfer , Slags , Computational fluid dynamics , Computer simulation , Cooling , Foundry ladles , High temperature , Metals

Second Law Analysis of Nanofluid Flow Through Circular Pipe

H. Shokouhmand, M. Moghaddami, M. Siavashi

ESDA 2010; 711-718doi:https://doi.org/10.1115/ESDA2010-25192

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Nanofluids , Pipes , Entropy , Water , Boundary-value problems , Heat flux , Nanoparticles , Computational fluid dynamics , Data acquisition systems

Convective Heat Transfer Enhancement With Nanofluids: The Effect of Temperature-Variable Thermal Conductivity

Sezer O¨zerinc¸, Almıla G. Yazıcıog˘lu, Sadık Kakac¸

ESDA 2010; 719-731doi:https://doi.org/10.1115/ESDA2010-25235

Abstract

View Article

PDF

Topics: Convection , Forced convection , Heat transfer , Nanofluids , Temperature , Thermal conductivity

Analysis of Single Phase Convective Heat Transfer in Microchannels With Variable Thermal Conductivity and Viscosity

Arif Cem Go¨zu¨kara, Almıla G. Yazıcıoglu, Sadık Kakac¸

ESDA 2010; 733-742doi:https://doi.org/10.1115/ESDA2010-25237

Abstract

View Article

PDF

Topics: Convection , Heat transfer , Microchannels , Thermal conductivity , Viscosity , Microscale devices , Gas flow , Energy dissipation , Fluids , Heat conduction

A Compact Nanostructure Enhanced Heat Sink With Flow in a Rectangular Channel

Muhsincan Sesen, Berkay Arda Kosar, Ali Kosar, Wisam Khudhayer, Berk Ahmet Ahishalioglu, Tansel Karabacak

ESDA 2010; 743-748doi:https://doi.org/10.1115/ESDA2010-25336

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Heat sinks , Heat , Copper , Nanorods , Generators , Heat flux , Microelectromechanical systems , Pressure drop , Thin films

Thermal and Fluid Dynamic Analysis on Impinging Jet for Aircraft Anti-Icing

Assunta Andreozzi, Fabio Lucibello, Oronzio Manca, Sergio Nardini, Mario Roma

ESDA 2010; 749-756doi:https://doi.org/10.1115/ESDA2010-25363

Abstract

View Article

PDF

Topics: Aircraft , Dynamic analysis , Fluids , Wings , Ice , Temperature , Computer simulation , Jets , Steady state , Thermofluids

The Improvement of Cooling Performance of a Flash Pumped Laser Using Nd:YAG

A. Berkan Erdog˘mus¸, Murat S¸ahin, Ali Murteza C¸olakog˘lu, Birol Erentu¨rk

ESDA 2010; 757-764doi:https://doi.org/10.1115/ESDA2010-25374

Abstract

View Article

PDF

Topics: Cooling , Heat transfer , Lasers

Experimental Investigation of Heat Transfer and Pressure Drop for Two-Phase R134A Flow in a 1.65 mm Glass Tube

Bilgehan Tekin, Almıla G. Yazıcıog˘lu, Hu¨snu¨ Kerpic¸c¸i, Sadık Kakac¸

ESDA 2010; 765-773doi:https://doi.org/10.1115/ESDA2010-25432

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Glass , Heat transfer , Pressure drop , Two-phase flow , Refrigerants , Microscale devices , Refrigeration , Temperature , Boundary-value problems

Science, Engineering and Education

Some Models and Methods to Nurture General Management Skills in Engineering Students Living in Large Residential Communities

Varghese Panthalookaran, Biru R.

ESDA 2010; 775-780doi:https://doi.org/10.1115/ESDA2010-24057

Abstract

View Article

PDF

Topics: Engineering students , Students , Engineers , Failure , Maintenance , Teams , Trains , Undergraduate students

Application of Ethics Criteria to Engineering Profession: Case Study of Engineering Students at the UAE University

Mohamed Y. E. Selim, Mohamed A. Al-Bayywomi

ESDA 2010; 781-791doi:https://doi.org/10.1115/ESDA2010-24143

Abstract

View Article

PDF

Topics: Engineering students , Ethics , Students , Engineering ethics , Bribery , Engineering disciplines , Salaries

The Virtual Laboratory of Program Control

Peter Kostal, Andrea Mudrikova, Dagmar Caganova

ESDA 2010; 793-801doi:https://doi.org/10.1115/ESDA2010-24213

Abstract

View Article

PDF

Topics: Control systems , Education , Engineering mechanics , Manufacturing systems , Materials science , Students , Teaching

Development of Competitive Skills in Future Mechanical Engineers

F. Jorge Lino, Teresa P. Duarte

ESDA 2010; 803-809doi:https://doi.org/10.1115/ESDA2010-24494

Abstract

View Article

PDF

Topics: Ceramics , Composite materials , Mechanical engineering , Mechanical engineers , Students , Teaching

Historical Progression of Mathematizing Vibro-Acoustic Problems

Mete O¨g˘u¨c¸

ESDA 2010; 811-814doi:https://doi.org/10.1115/ESDA2010-24502

Abstract

View Article

PDF

Topics: Acoustics , Modeling , Vibration , Instrumentation

Non Destructive Testing of Low Profile Light Weight Track System

Hassan Al Nageim

ESDA 2010; 815-822doi:https://doi.org/10.1115/ESDA2010-24727

Abstract

View Article

PDF

Topics: Nondestructive evaluation , Weight (Mass) , Rails , Traffic , Concretes , Flow (Dynamics) , Noise (Sound) , Prestressed concrete , Roads , Steel

Control Theory in Practice: Magnetic Levitation

John Rogers, Robert Rabb

ESDA 2010; 823-829doi:https://doi.org/10.1115/ESDA2010-24827

Abstract

View Article

PDF

Topics: Control theory , Magnetic levitation , Students , Design , Sensors , Actuators , Mechatronics , Steel , Teams , Capacitors

A Successful Model of Cooperation Between a Public University and Industrial Companies Through a Hybrid Public/Private R&D Institute

F. Jorge Lino, A. Barata da Rocha

ESDA 2010; 831-840doi:https://doi.org/10.1115/ESDA2010-24883

Abstract

View Article

PDF

Topics: Composite materials , Dimensions , Engineering management , Industrial research , Innovation , Particle spin , Personnel management , Rapid prototyping , Rotation , Spin (Aerodynamics)

All Years

Proceedings Papers

Applied Mechanics

Heat Transfer

Science, Engineering and Education

Email alerts

Most Read Proceedings Papers in ESDA

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only