Volumes | Engineering Systems Design and Analysis | American Society of Mechanical Engineers Digital Collection

Topics: Fatigue life , Optimization , Rollers , Steel , Electromagnetic induction , Stress , Chemical vapor deposition , Deformation , Fatigue limit , Finite element analysis

Behavior Study of High Impact Resistant Reinforced Concrete Frames Using Crack Conduction Method

Navid Heidarzadeh, S. Mohammad Razavi, Nima Shamsaei

ESDA 2006; 19-23doi:https://doi.org/10.1115/ESDA2006-95086

Abstract

View Article

PDF

Topics: Deflection , Fracture (Materials) , Heat conduction , Reinforced concrete , Weight (Mass)

Characterisation of a Simplified Aeroengine Casing Subjected to a Radial Loading Condition Using FE and Approximate Methods

Sabesan Rajaratnam, Tom H. Hyde, Sean B. Leen

ESDA 2006; 25-33doi:https://doi.org/10.1115/ESDA2006-95089

Abstract

View Article

PDF

Topics: Blades , Buckling , Creep , Deformation , Design , Failure , Fracture (Materials) , Reliability , Shells , Stiffness

Thermomechanical Model and Experimental Analysis of Progressive Fatigue Damage in Steel Specimens

Francesca Cura`, Graziano Curti, Raffaella Sesana

ESDA 2006; 35-43doi:https://doi.org/10.1115/ESDA2006-95114

Abstract

View Article

PDF

Topics: Experimental analysis , Fatigue damage , Steel , Thermomechanics

Finite Element Analysis of Residual Stresses on Butt Welded Joints

Enrico Armentani, Renato Esposito, Raffaele Sepe

ESDA 2006; 45-53doi:https://doi.org/10.1115/ESDA2006-95125

Abstract

View Article

PDF

Topics: Finite element analysis , Residual stresses , Welded joints , Welding , Stress , Base metals , Cooling , Finite element methods , Fracture (Materials) , Heat of fusion

Experimental and Numerical Analyses of Mixed Mode Crack Initiation Angle

Jafar Al Bin Mousa, Nesar Merah, Abdel-Salam Eleiche, Abul-Fazal Arif

ESDA 2006; 55-60doi:https://doi.org/10.1115/ESDA2006-95146

Abstract

View Article

PDF

Topics: Fracture (Materials) , Numerical analysis , Stress , Density , Experimental analysis , Finite element analysis

Thermal Fatigue Prediction for Leadless Solder Joint of TFBGA

Chia-Lung Chang, Tzu-Jen Lin, Chih-Hao Lai

ESDA 2006; 61-66doi:https://doi.org/10.1115/ESDA2006-95149

Abstract

View Article

PDF

Topics: Creep , Density , Fatigue , Fatigue life , Solder joints , Solders , Damage , Deformation , Finite element analysis , Materials properties

Feasibility Studies on the Modeling and Evaluation of Residual Stresses in Arc Welded Butt Joints

K. Satyambabu, N. Ramachandran

ESDA 2006; 67-79doi:https://doi.org/10.1115/ESDA2006-95176

Abstract

View Article

PDF

Topics: Modeling , Residual stresses , Arc welding , Metals , Stress , Welding , Heat , Design , Brittle fracture , Compressive stress

Cyclic Loading of Beams Based on Kinematics Hardening Behavior Coupled With Isotropic Damage

Ali Nayebi, Kourosh H. Shirazi

ESDA 2006; 81-88doi:https://doi.org/10.1115/ESDA2006-95239

Abstract

View Article

PDF

Topics: Damage , Hardening , Kinematics , Algorithms , Deformation , Plasticity , Stress , Work hardening , Compression , Tension

Fracture Mechanics Study of Cracked Pipe Bends Under Internal Pressure and Bending Moments

Manish M. Joglekar, S. G. Joshi, B. K. Dutta

ESDA 2006; 89-98doi:https://doi.org/10.1115/ESDA2006-95263

Abstract

View Article

PDF

Topics: Collapse , Finite element analysis , Fracture (Materials) , Fracture mechanics , Pipe bends , Pressure , Stress

Body Force Method for Flamant Problem Using Complex Potentials

B. S. Manjunath, D. S. Ramakrishna

ESDA 2006; 99-103doi:https://doi.org/10.1115/ESDA2006-95303

Abstract

View Article

PDF

Topics: Boundary-value problems , Stress , Stress analysis (Engineering)

Damage Criterions in Thermo-Mechanical Fatigue Models

Cristiana Delprete, Carlo Rosso, Raffaella Sesana

ESDA 2006; 105-114doi:https://doi.org/10.1115/ESDA2006-95470

Abstract

View Article

PDF

Topics: Damage , Exhaust manifolds , Fatigue , Thermomechanics

Analysis of the Stress Distribution in Thermal Barrier Coatings

Daniele Botto

ESDA 2006; 115-123doi:https://doi.org/10.1115/ESDA2006-95606

Abstract

View Article

PDF

Topics: Stress concentration , Thermal barrier coatings

Experimental Investigation of Charpy Impact Resistance in Rail Vehicle Steel Wheels

A. Asadi Lari, S. H. Hashemi

ESDA 2006; 125-131doi:https://doi.org/10.1115/ESDA2006-95633

Abstract

View Article

PDF

Topics: Rail wheels , Steel , Wheels , Fracture (Materials) , Fracture toughness , Impact testing , Testing equipment , Failure , Machinery , Oscilloscopes

Heat Transfer

Modeling of Gas Turbine Cooled Blades

A. Pashayev, D. Askerov, R. Sadiqov, A. Samedov, C. Ardil

ESDA 2006; 133-141doi:https://doi.org/10.1115/ESDA2006-95012

Abstract

View Article

PDF

Topics: Blades , Gas turbines , Modeling , Heat , Artificial neural networks , Boundary-value problems , Cooling , Errors , Integral equations , Nozzles

Simulation of Single and Multiple Impinging Jet Cooling and Comparison With Experimental Data

S. Gordeev, V. Heinzel, V. Slobodchuk

ESDA 2006; 143-158doi:https://doi.org/10.1115/ESDA2006-95037

Abstract

View Article

PDF

Topics: Cooling , Simulation , Turbulence , Heat transfer , Flow (Dynamics) , Jets

Transient Heat Transfer Analysis of Freeze Plate Structures Cooled by Nanofluids

Rong-Yuan Jou

ESDA 2006; 159-164doi:https://doi.org/10.1115/ESDA2006-95100

Abstract

View Article

PDF

Topics: Heat transfer , Nanofluids , Plates (structures) , Transient heat transfer

Heat Transfer by Mixed Convection Opposing Laminar Flow From the Inside Surface of Uniformly Heated Inclined Circular Tube

H. Mohammed, T. Yusaf

ESDA 2006; 165-175doi:https://doi.org/10.1115/ESDA2006-95202

Abstract

View Article

PDF

Topics: Heat transfer , Laminar flow , Mixed convection

Experimental Investigation of Free Convection Heat Transfer With Entrance Restriction Placed at Top of a Vertical Circular Tube

H. Mohammed, T. Yusaf, Y. Salman

ESDA 2006; 177-187doi:https://doi.org/10.1115/ESDA2006-95229

Abstract

View Article

PDF

Topics: Heat transfer , Natural convection

A Comparison Between the Local Free Convection Heat Transfer Coefficients of Horizontal Cylinders in Vertical and Inclined Arrays

Mehdi Ashjaee, Tooraj Yousefi

ESDA 2006; 189-196doi:https://doi.org/10.1115/ESDA2006-95231

Abstract

View Article

PDF

Topics: Cylinders , Heat transfer coefficients , Natural convection , Heat transfer , Rayleigh number , Interferometers , Temperature

Neural Network Analysis of Free Convection Around Isothermal Elliptic Tube

Mehdi Ashjaee, Reza Afzali, Mohammad Niknami, Mehdi Amiri, Tooraj Yousefi

ESDA 2006; 197-204doi:https://doi.org/10.1115/ESDA2006-95238

Abstract

View Article

PDF

Topics: Artificial neural networks , Natural convection

A System Design Approach for Thermal Insulation of Subsea Equipment Using CFD

Stein Sorbye, Randi Moe

ESDA 2006; 205-214doi:https://doi.org/10.1115/ESDA2006-95255

Abstract

View Article

PDF

Topics: Computational fluid dynamics , Design , Ocean engineering , Thermal insulation , Oceans , Reliability , Water , Cooling , Fluid dynamics , Fluids

Analysis of a Virtual Prototype First-Stage Rotor Blade Using Integrated Computer-Based Design Tools

Michel Arnal, Christian Precht, Thomas Sprunk, Tobias Danninger, John Stokes

ESDA 2006; 215-224doi:https://doi.org/10.1115/ESDA2006-95257

Abstract

View Article

PDF

Topics: Blades , Computers , Design , Engineering prototypes , Rotors , Computational fluid dynamics , Heat transfer , Airfoils , Coolants , Cooling

Laminar Vapor-Gas-Drop Flow in Vertical Ribbed Tubes

Hossein Shokouhmand, Amir Ahmadzadegan

ESDA 2006; 225-230doi:https://doi.org/10.1115/ESDA2006-95265

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Vapors , Drops , Gas flow , Heat transfer , Evaporation , Heat , Hydrodynamics , Mass transfer , Thermodynamics

Flow Visualization and Pattern Dynamics in Be´nard-Marangoni Convection

Samir Rahal, Hisao Azuma

ESDA 2006; 231-239doi:https://doi.org/10.1115/ESDA2006-95284

Abstract

View Article

PDF

Topics: Convection , Dynamics (Mechanics) , Flow visualization , Interferometry , Thermography

Transition to Turbulence in a Czochralski Convective Flow

Samir Rahal, Hisao Azuma

ESDA 2006; 241-247doi:https://doi.org/10.1115/ESDA2006-95286

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Turbulence

The Effects of Obstacle and Vent Position on Particle Removal From an Enclosure

M. Hendijanifard, M. H. Saidi, M. Taeibi-Rahni

ESDA 2006; 249-261doi:https://doi.org/10.1115/ESDA2006-95290

Abstract

View Article

PDF

Topics: Particulate matter , Vents , Computational fluid dynamics , Convection , Diffusion (Physics) , Instrumentation , Navier-Stokes equations , Transients (Dynamics)

The Step Effect and Particle Removal From an Enclosure

M. Hendijanifard, M. H. Saidi, M. Taeibi-Rahni

ESDA 2006; 263-271doi:https://doi.org/10.1115/ESDA2006-95291

Abstract

View Article

PDF

Topics: Particulate matter , Convection , Navier-Stokes equations , Computational fluid dynamics , Diffusion (Physics) , Instrumentation , Transients (Dynamics)

Hygro-Thermal Performance of Ventilated Underground Cavities

Pierfrancesco Brunello, Davide Del Col

ESDA 2006; 273-280doi:https://doi.org/10.1115/ESDA2006-95394

Abstract

View Article

PDF

Topics: Cavities , Heat , Water , Condensation , Design , Evaporation , Mass transfer , Risk assessment , Steady state , Subways

CFD Methodology to Predict Demisting Phenomena on the Car Windows

Fabrizio Mattiello, Giulio Croce, Alessandra De Angelis

ESDA 2006; 281-287doi:https://doi.org/10.1115/ESDA2006-95398

Abstract

View Article

PDF

Topics: Computational fluid dynamics , Vehicles , HVAC equipment , Water , Fluids , Simulation , Air flow , Boundary-value problems , Computer-aided design , Condensation

Development of an Interferometric Method for Measurement of Thermal Conductivity of a Transparent Medium

Choondal B. Sobhan, Renju Kurian

ESDA 2006; 289-295doi:https://doi.org/10.1115/ESDA2006-95436

Abstract

View Article

PDF

Topics: Thermal conductivity measurement , Transparency , Thermal conductivity , Heat transfer , Interferometry , Flat plates , Flow (Dynamics) , Optical measurement , Visualization

Transient Radiative Heat Transfer Analysis of a Polypropylene Layer Using Hottel’s Zonal Method

Babak Safavisohi, Ehsan Sharbati, Cyrus Aghanajafi, Seyed Reza Khatami Firoozabadi

ESDA 2006; 297-304doi:https://doi.org/10.1115/ESDA2006-95438

Abstract

View Article

PDF

Topics: Radiative heat transfer , Transients (Dynamics) , Heat conduction , Polymer films , Polymers , Thermal conductivity , Adhesives , Convection , Differential equations , Diffusion (Physics)

Analysis of Thermoelectric Generators Replacing Low Temperature Heat Exchangers in the Biomass CHP Plant Gu¨ssing

Johannes Bolha`r-Nordenkampf, T. Pro¨ll, Hermann Hofbauer, Christian Aichernig

ESDA 2006; 305-313doi:https://doi.org/10.1115/ESDA2006-95475

Abstract

View Article

PDF

Topics: Biomass , Cogeneration plants , Generators , Heat exchangers , Low temperature , Combined heat and power , Thermoelectricity , Computer software , Electricity (Physics) , Elemental semiconductors

Development of a High-Performance Heat Sink for the International Space Station: Hydraulic and Thermostructural Analysis

Walter Grassi, Daniele Testi

ESDA 2006; 315-324doi:https://doi.org/10.1115/ESDA2006-95480

Abstract

View Article

PDF

Topics: Heat sinks , Space stations , Design , Finite element methods , Stress , Aerospace industry , Dielectric liquids , Ducts , Electrohydrodynamics , Heat

Mixed Convection Heat Transfer in a Convergent Vertical Channel With a Moving Plate

Assunta Andreozzi, Nicola Bianco, Giovanni Lacasa, Vincenzo Naso

ESDA 2006; 325-336doi:https://doi.org/10.1115/ESDA2006-95502

Abstract

View Article

PDF

Topics: Heat transfer , Mixed convection , Heat flux , Wall temperature , Buoyancy , Flow (Dynamics) , Finite volume methods , Natural convection , Numerical analysis , Temperature

Experimental Investigation on the Effect of Longitudinal Aspect Ratio on Natural Convection in Inclined Channels Heated Below

Assunta Andreozzi, Bernardo Buonomo, Oronzio Manca, Sergio Nardini

ESDA 2006; 337-347doi:https://doi.org/10.1115/ESDA2006-95526

Abstract

View Article

PDF

Topics: Natural convection , Flow (Dynamics) , Flow separation , Flow visualization , Heat flux , Plumes (Fluid dynamics) , Wall temperature , Heat transfer , Shapes , Visualization

Effect of Channel Spacing on Mixed Convection in Vertical Convergent Channels

Nicola Bianco, Giovanni Lacasa, Oronzio Manca

ESDA 2006; 349-360doi:https://doi.org/10.1115/ESDA2006-95531

Abstract

View Article

PDF

Topics: Mixed convection , Flow (Dynamics) , Reynolds number , Pressure drop , Turbulence , Wall temperature , Flat plates , Fluids , Forced convection , Heat flux

Numerical and Analytical Analyses of a High Temperature Heat Exchanger

Donato Aquaro, Franco Donatini, Maurizio Pieve

ESDA 2006; 361-369doi:https://doi.org/10.1115/ESDA2006-95575

Abstract

View Article

PDF

Topics: Heat exchangers , High temperature , Temperature , Enthalpy , Fluids , Heat , Ceramics , Coal , Combined cycles , Combustion

Parametric Analysis for Thermal and Fluid Dynamic Management of Natural Convection in a Channel-Chimney System

Assunta Andreozzi, Bernardo Buonomo, Oronzio Manca

ESDA 2006; 371-382doi:https://doi.org/10.1115/ESDA2006-95585

Abstract

View Article

PDF

Topics: Fluids , Natural convection , Rayleigh number , Wall temperature , Computer simulation , Flow (Dynamics) , Heat flux , Steady state , Vorticity

Numerical and Experimental Characterization of a Plate Compact Multipass Counter Flow and Locally Cross-Flow Recuperator

Paolo M. Congedo, Giuseppe Starace

ESDA 2006; 383-390doi:https://doi.org/10.1115/ESDA2006-95604

Abstract

View Article

PDF

Topics: Cross-flow , Experimental characterization , Flow (Dynamics) , Heat exchangers , Heat transfer , Pressure drop , Computer simulation , Dimensions , Manufacturing , Temperature

Numerical Simulation of Buoyancy Affected Turbulent Air Flow in a Room

A. Nouri-Borujerdi, A. Fathi-Gishnegani

ESDA 2006; 391-399doi:https://doi.org/10.1115/ESDA2006-95634

Abstract

View Article

PDF

Topics: Air flow , Buoyancy , Computer simulation , Flow (Dynamics) , Turbulence

Conjugated Heat Transfer in Skirt Hot Box in Pressure Vessels

Hossein Shokouhmand, Manoochehr Bozorgmehrian

ESDA 2006; 401-411doi:https://doi.org/10.1115/ESDA2006-95729

Abstract

View Article

PDF

Topics: Heat transfer , Pressure vessels , Vessels , Junctions , Temperature gradient , Thermal stresses , Heat , Natural convection , Cavities , Fluids

Numerical Analysis of a Tree-Shaped Cooling Structure for a 2-D Slab: A Validation of a “Constructally Optimal” Configuration

M. Robbe, E. Sciubba, S. Lorente, A. Bejan

ESDA 2006; 413-422doi:https://doi.org/10.1115/ESDA2006-95749

Abstract

View Article

PDF

Topics: Cooling , Design , Heat transfer , Numerical analysis , Slabs

Numerical Modeling of the Ventilation System for a Cooler Room

F. Cambuli, P. F. Orru`, M. T. Pilloni

ESDA 2006; 423-430doi:https://doi.org/10.1115/ESDA2006-95798

Abstract

View Article

PDF

Topics: Computer simulation , Ventilation , Cooling , Temperature , Air flow , Ceilings , Control systems , Cooling systems , Dynamic analysis , Fluids

Flow and Heat Transfer Analysis in Diverse Microchannel Geometries

J. Garci´a-Gonza´lez, A. Herna´ndez-Guerrero, C. Rubio-Arana, F. Solorio-Ordaz

ESDA 2006; 431-437doi:https://doi.org/10.1115/ESDA2006-95821

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Fluid dynamics , Heat transfer , Microchannels , Viscosity

Internal Combustion Engines

Power and Emission Evaluation of Natural Gas Engines Converted From Gasoline

Bashir Samsam Shariat

ESDA 2006; 439-445doi:https://doi.org/10.1115/ESDA2006-95017

Abstract

View Article

PDF

Topics: Emissions , Gas engines , Gasoline , Engines , Natural gas , Vehicles , Design , Exhaust systems , Fuels , Ignition

Finite Element Simulation of Multilayer Metal Cylinder Head Gaskets

Mario Durando, Domenico Petronio, Giuseppe Rivilli, Gabriele Virzi` Mariotti

ESDA 2006; 447-452doi:https://doi.org/10.1115/ESDA2006-95115

Abstract

View Article

PDF

Topics: Cylinders , Finite element analysis , Gaskets , Metals , Simulation , Engines , Topology , Design , Dimensions , Finite element methods

FE Calculation Methodology for the Thermodynamic Fatigue Analysis of an Engine Component

Vito Angileri, Raffaele Bonavolonta`, Mario Durando, Massimiliano Garganese, Gabriele Virzi` Mariotti

ESDA 2006; 453-461doi:https://doi.org/10.1115/ESDA2006-95118

Abstract

View Article

PDF

Topics: Cycles , Cylinders , Engines , Exhaust manifolds , Exhaust systems , Fatigue , Fatigue analysis , Fatigue damage , Finite element analysis , Fluid dynamics

Downsizing of SI Engines by Turbo-Charging

Giuseppe Police, Salvatore Diana, Veniero Giglio, Biagio Iorio, Natale Rispoli

ESDA 2006; 463-476doi:https://doi.org/10.1115/ESDA2006-95215

Abstract

View Article

PDF

Topics: Spark-ignition engine , Turbochargers , Cycles , Exhaust systems , Valves , Fuel consumption , Vehicles , Direct injection spark ignition engines , Engines , Flow (Dynamics)

Experimental Calibration Method to Validate Flame Front Propagation Data Produced by Virtual Engine Model (VEM) Computation

M. Pontoppidan, G. Bella, C. Fabrizi, S. Ubertini

ESDA 2006; 477-485doi:https://doi.org/10.1115/ESDA2006-95217

Abstract

View Article

PDF

Topics: Calibration , Computation , Engines , Flames , Combustion , Computer simulation , Simulation , Visualization

Computer Simulation of Turbocharged Aftercooled Gasoline Engine

Shahabaddin Kharazmi, Ali Hajilouy-Benisi, Ali Asghar Mozafari

ESDA 2006; 487-495doi:https://doi.org/10.1115/ESDA2006-95352

Abstract

View Article

PDF

Topics: Computer simulation , Gasoline engines , Air flow , Combustion , Computers , Diesel engines , Engines , Modeling

Mathematical Modelling of Particle Formation in Combustion Processes

Alessandro Zucca, Daniele L. Marchisio, Antonello A. Barresi, Giancarlo Baldi

ESDA 2006; 497-506doi:https://doi.org/10.1115/ESDA2006-95407

Abstract

View Article

PDF

Topics: Combustion , Modeling , Particulate matter , Soot , Flames , Computational fluid dynamics , Turbulence , Climate , Engineering simulation , Method of moments

Simulation of Poly-Disperse Multiphase Systems via Computational Fluid Dynamics

Daniele L. Marchisio, Marco Vanni, Antonello A. Barresi, Giancarlo Baldi

ESDA 2006; 507-516doi:https://doi.org/10.1115/ESDA2006-95467

Abstract

View Article

PDF

Topics: Aerosols , Chemical reactions , Computational fluid dynamics , Fluids , Method of moments , Momentum , Simulation , Sprays , Turbulence

On the Use of Fast-Response Pressure Transducers in a Common-Rail Diesel Injection System

R. Amirante, L. A. Catalano, A. Dadone, V. Lombardo

ESDA 2006; 517-525doi:https://doi.org/10.1115/ESDA2006-95479

Abstract

View Article

PDF

Topics: Common rail fuel injectors , Diesel , Pressure transducers , Pressure , Automotive industry , Circuits , Ejectors , Sensors

1D Modelling and Simulation of a Piezo Injector for Spray Guided Gasoline Direct Injection Systems

Marco Antonelli, Luigi Martorano, Luca Nuti, Michele Provenzale, Luca Matteucci

ESDA 2006; 527-535doi:https://doi.org/10.1115/ESDA2006-95556

Abstract

View Article

PDF

Topics: Ejectors , Gasoline , Modeling , Simulation , Sprays , Experimental analysis , Optimization , Piezoelectric actuators , Reliability , Valves

Ion Current Based Spark Advance Management for Maximum Torque Production and Knock Control

Nicolo` Cavina, Giacomo Po, Luca Poggio

ESDA 2006; 537-545doi:https://doi.org/10.1115/ESDA2006-95558

Abstract

View Article

PDF

Topics: Torque , Engines , Pressure , Computer software , Control equipment , Cylinders , Combustion , Control systems , Damage , Databases

Application of Magneto-Elastic Sensors to the Measurement of Fluid Flow Rates in the Automotive Domain

Alberto M. Merlo, Carloandrea Malvicino, Giorgio Carpegna, Walter Ferraris, Maria L. Parodi, Riccardo Seccardini, Helmut Pfu¨tzner, Ju¨rgen Kosel, Turgut Meydan, Manuel Va´zquez, Michael Rohn, Bernd Marquardt

ESDA 2006; 547-556doi:https://doi.org/10.1115/ESDA2006-95582

Abstract

View Article

PDF

Topics: Flow (Dynamics) , Fluid measurement , Sensors , Engines , Fluids , Temperature , Air conditioning , Automotive industry , Construction , Cooling

High-Pressure Rotary Pump Performance in Multi-Jet Common Rail Systems

Andrea Emilio Catania, Alessandro Ferrari, Antonio Mittica

ESDA 2006; 557-565doi:https://doi.org/10.1115/ESDA2006-95590

Abstract

View Article

PDF

Topics: Common rail fuel injectors , High pressure (Physics) , Pumps , Circuits , Compression , Cooling , Flow (Dynamics) , Fuels , Hydraulic circuits , Leakage

Diesel Engine Combustion Monitoring Based on Acoustic Measurement of Exhaust Systems

R. Gennish, J. Jiang, A. Albarbar, G. Harris, F. Gu, A. Ball

ESDA 2006; 567-574doi:https://doi.org/10.1115/ESDA2006-95648

Abstract

View Article

PDF

Topics: Acoustics , Combustion , Diesel engines , Exhaust systems , Engines , Pressure , Fuels , Reflection , Sensors

Numerical and Experimental Analysis on a Small GDI, Stratified Charge, Motorcycle Engine

R. Gentili, S. Zanforlin, S. Frigo

ESDA 2006; 575-581doi:https://doi.org/10.1115/ESDA2006-95657

Abstract

View Article

PDF

Topics: Engines , Experimental analysis , Motorcycles , Sprays , Computational fluid dynamics , Combustion , Corporate average fuel economy , Cycles , Cylinders , Ejectors

Enhanced Splash Models for High Pressure Diesel Sprays

L. Allocca, L. Andreassi, S. Ubertini

ESDA 2006; 583-595doi:https://doi.org/10.1115/ESDA2006-95716

Abstract

View Article

PDF

Topics: Diesel , High pressure (Physics) , Sprays , Diesel engines , Modeling , Simulation , Combustion , Common rail fuel injectors , Computer software , Emissions

Manufacturing

Blocker Forging Die Design Using Backward Deformation Method

Farid R. Biglari, Mahmoud Zamani Neyestani, Kamran M. Nickbin

ESDA 2006; 597-605doi:https://doi.org/10.1115/ESDA2006-95002

Abstract

View Article

PDF

Topics: Deformation , Design , Forging , Simulation , Wear , Boundary-value problems , Finite element analysis , Metals , Preforms , Shapes

FEM Simulation of the Whole Circle of Aluminum Hot Extrusion Using Circular Dies With Different Extrusion Angle

A. Lontos, K.-D. Bouzakis, G. Demosthenous, A. Baldoukas

ESDA 2006; 607-612doi:https://doi.org/10.1115/ESDA2006-95026

Abstract

View Article

PDF

Topics: Aluminum , Extruding , Finite element methods , Finite element model , Simulation , Geometry , Temperature , Containers , Product quality , Aluminum extrusions

Machines on the Basis of Variable Structure Mechanisms (VSM)

Samudin Abdraimov, Nazira Samudinovna Abdraimova

ESDA 2006; 613-620doi:https://doi.org/10.1115/ESDA2006-95063

Abstract

View Article

PDF

Topics: Levers , Machinery , Chain , Hammers , Brakes , Couplings , Displacement , Drills (Tools) , Durability , Energy consumption

The State of Art on Scheduling of FMS: A Comprehensive Survey

Vijay Kumar M., A. N. N. Murthy, K. C. Chandrashekara

ESDA 2006; 621-628doi:https://doi.org/10.1115/ESDA2006-95077

Abstract

View Article

PDF

Topics: Flexible manufacturing systems , Genetic algorithms , Artificial intelligence , Industrial research , Manufacturing industry , Optimization , Simulation

Prediction of Residual Stresses and Buckling Distortion in Welding of a Thin Wall Aluminum Butt Joint

Sanaz Yazdanparast, Mohsen Asle Zaeem, Iraj Rajabi

ESDA 2006; 629-635doi:https://doi.org/10.1115/ESDA2006-95081

Abstract

View Article

PDF

Topics: Aluminum , Buckling , Residual stresses , Thin wall structures , Welding , Computer simulation , Deformation , Eigenvalues , Flow (Dynamics) , Heat

A Novel Simple and Low Cost 4-DOF Angular Indexing Calibrating Technique for High Precision Rotary Table

Chun-Jen Chen, Wenyuh Jywe, Yun-Feng Teng, Chien-Huang Liu

ESDA 2006; 637-645doi:https://doi.org/10.1115/ESDA2006-95116

Abstract

View Article

PDF

Topics: Diffraction gratings , Displacement , Errors , Indexing (Machining) , Interferometers , Lasers , Measurement systems , Optics , Sensors , Uncertainty

Automatic Procedures as Help for Optimal Cam Design

Massimo Antonini, Alberto Borboni, Roberto Bussola, Rodolfo Faglia

ESDA 2006; 647-654doi:https://doi.org/10.1115/ESDA2006-95122

Abstract

View Article

PDF

Topics: Design , Optimization , Genetic algorithms , Algorithms , Computer software , Evolutionary algorithms , Machinery , Servomotors

Effects of Mandrel Shape and Dimension on Deformation Behavior for Hot Mandrel Bending

Soon-Tae Jang, Hisashi Naoi, Takashi Kurita

ESDA 2006; 655-662doi:https://doi.org/10.1115/ESDA2006-95134

Abstract

View Article

PDF

Topics: Deformation , Dimensions , Shapes , Stress , Wall thickness , Pipes , Errors , Numerical analysis , Pipe joints , Steel

Automatic Positioning for Optical Scanning of Overlapping Fan-Blades

Alan C. Lin, Jun-Chung Wu

ESDA 2006; 663-672doi:https://doi.org/10.1115/ESDA2006-95150

Abstract

View Article

PDF

Topics: Blades , Pressure , Suction , Computer programming , Engineers , Geometry

Machining of Rotational Asymmetric Components With a Single Turning Centre

Y. Yusof, K. Case, S. T. Newman

ESDA 2006; 673-681doi:https://doi.org/10.1115/ESDA2006-95163

Abstract

View Article

PDF

Topics: Machining , Turning , Production planning , Manufacturing , Manufacturing systems , Product development , Geometry , Innovation , Machinery , Milling

Prediction and Analysis of Size Tolerances Achievable in Peripheral End Milling

M. N. Islam, Han Ul Lee, Dong-Woo Cho

ESDA 2006; 683-691doi:https://doi.org/10.1115/ESDA2006-95172

Abstract

View Article

PDF

Topics: Cutting , Milling

Study on the Mechanical Properties of AZ31 Magnesium Alloy Products Under Hot Extrusion Process

Su-Hai Hsiang, Yi-Wei Lin

ESDA 2006; 693-700doi:https://doi.org/10.1115/ESDA2006-95241

Abstract

View Article

PDF

Topics: Extruding , Magnesium alloys , Mechanical properties

Drilling Thrust and Torque Prediction of Viscoplastic Materials

Hossein Vaghefpour, Ali Nayebi

ESDA 2006; 701-709doi:https://doi.org/10.1115/ESDA2006-95246

Abstract

View Article

PDF

Topics: Drilling , Thrust , Torque , Cutting , Chisels , Drills (Tools) , Flow (Dynamics) , Friction , Shear (Mechanics) , Temperature

Near Optimal Grinding Process Design Using Neural Network and Real Coded Genetic Algorithm

Indrajit Mukherjee, Pradip Kumar Ray

ESDA 2006; 711-717doi:https://doi.org/10.1115/ESDA2006-95256

Abstract

View Article

PDF

Topics: Artificial neural networks , Genetic algorithms , Grinding , Process design , Computer numerical control machine tools , Manufacturing , Modeling , Optimization , Algorithms , Composite materials

Manufacture of Propulsion Systems for Micro Underwater Vehicles

Yih-Lin Cheng, Yu-Shen Shen, Jiang-Hong Lin

ESDA 2006; 719-726doi:https://doi.org/10.1115/ESDA2006-95259

Abstract

View Article

PDF

Topics: Propulsion systems , Underwater vehicles , Propellers , Manufacturing , Micropumps , Blades , Thrust , Geometry , Airfoils , Design

A CAD/CAE System for Structures of Dockside Container Cranes

Chonghua Wang, Hua Li

ESDA 2006; 727-733doi:https://doi.org/10.1115/ESDA2006-95272

Abstract

View Article

PDF

Topics: Computer-aided design , Computer-aided engineering , Containers , Cranes , Finite element analysis , Computer software , Design

Automatic Definition of the Sequence of Operations in Progressive Dies

Fernando Fado´n Salazar, Jose´ Enrique Cero´n Hoyos

ESDA 2006; 735-742doi:https://doi.org/10.1115/ESDA2006-95304

Abstract

View Article

PDF

Topics: Approximation , Blanks , Computer software , Design , Maintenance , Solid modeling , Strips

Quantitative Evaluation of Surface Roughness of Flat Metal Surfaces Using Computer Vision System

Kedar H. Inamdar, S. G. Joshi

ESDA 2006; 743-749doi:https://doi.org/10.1115/ESDA2006-95322

Abstract

View Article

PDF

Topics: Computers , Metal surfaces , Surface roughness

Manufacturing Tolerance Analysis of a Robot Manipulator’s Joint Axis Orientation Employing Single Monte-Carlo Simulation

Dong Hwan Choi, Hong Hee Yoo

ESDA 2006; 751-755doi:https://doi.org/10.1115/ESDA2006-95349

Abstract

View Article

PDF

Topics: Manufacturing , Robots , Simulation , Tolerance analysis , Errors , Manipulators , Clearances (Engineering) , Design , Engineers

Incremental Forming of Friction Stir Welded Taylored Sheets

G. Ambrogio, L. Fratini, F. Micari

ESDA 2006; 757-762doi:https://doi.org/10.1115/ESDA2006-95375

Abstract

View Article

PDF

Topics: Aluminum , Blanks , Friction , Metal stamping , Sheet metal work , Skin , Tooling , Vehicles

Friction Stir Welding of 3D Industrial Parts: Joint Strength Analysis

Livan Fratini, Mario Piacentini

ESDA 2006; 763-770doi:https://doi.org/10.1115/ESDA2006-95382

Abstract

View Article

PDF

Topics: Friction , Welding , Joining , Alloys , Geometry , Shapes , Strength (Materials) , Weight (Mass)

Effect of Dual Beam on Reduction of Porosity in CO₂ Laser Welding

Edoardo Capello, Barbara Previtali

ESDA 2006; 771-780doi:https://doi.org/10.1115/ESDA2006-95388

Abstract

View Article

PDF

Topics: Carbon dioxide lasers , Porosity , Welding , Lasers , Laser welding , Aluminum , Carbon dioxide , Carbon steel , Fatigue strength , Laser beams

Positioning Accuracy Investigations in Face Spiroid Gears

Roman Staniek

ESDA 2006; 781-786doi:https://doi.org/10.1115/ESDA2006-95404

Abstract

View Article

PDF

Topics: Gears , Cutting tools , Machining , Wheels , Cutting , Disks , Indexing (Machining) , Machine tools , Machinery , Machining centers

Washers to Reduce Vibration and Noise From the Injection Molding Process

Kuang-Yih Tsuei, Shu-Fen Kuo

ESDA 2006; 787-789doi:https://doi.org/10.1115/ESDA2006-95428

Abstract

View Article

PDF

Topics: Injection molding , Noise (Sound) , Vibration , Rods , Absorption , Elastomers , Injection molding machines , Machinery , Molding , Rubber

The Effect of Ultrasonic-Vibration on Upsetting

Jung-Chung Hung, Yu-Chung Tsai, Chinghua Hung

ESDA 2006; 791-797doi:https://doi.org/10.1115/ESDA2006-95442

Abstract

View Article

PDF

Topics: Aluminum alloys , Compression , Friction , Vibration

Job Dispatching and Monitoring in an Agile Production System

Andrea Chiodi, Andrea Ballarino, Francesco Airoldi

ESDA 2006; 799-808doi:https://doi.org/10.1115/ESDA2006-95476

Abstract

View Article

PDF

Topics: Computer-aided design , Geometry , Internet , Logistics , Machinery , Manufacturing , Manufacturing systems , Pulse width modulation , Sales , Supply chain management

Hot Drilling of 6082 Aluminium Alloy

L. Santo, F. Trovalusci, V. Tagliaferri

ESDA 2006; 809-813doi:https://doi.org/10.1115/ESDA2006-95486

Abstract

View Article

PDF

Topics: Aluminum alloys , Drilling , Temperature , Machining , Drills (Tools) , Materials properties , Thrust , Torque , Yield stress , Cobalt

Theoretical Basis of Generation of Face Worm Gear Drive With Duplex Worm

Andrzej Gessner

ESDA 2006; 815-823doi:https://doi.org/10.1115/ESDA2006-95519

Abstract

View Article

PDF

Topics: Worm gears , Gears , Algorithms , Cutting , Design , Geometry , Machinery , Machining centers , Manufacturing , Shapes

Backlash Adjustment in Plane Spiroid Gears

Andrzej Gessner, Roman Staniek

ESDA 2006; 825-830doi:https://doi.org/10.1115/ESDA2006-95520

Abstract

View Article

PDF

Topics: Gears , Bearings , Mechanical drives , Rotation

DNC Method for Flatness Reduction by Machine Tool Error Compensation in Planning Processes

P. Franco, M. Estrems, F. Faura

ESDA 2006; 831-838doi:https://doi.org/10.1115/ESDA2006-95528

Abstract

View Article

PDF

Topics: Computer-aided design , Error compensation , Errors , Machine tools , Milling

Experimental Investigation of Water Jet Orifice Efficiency by a Novel Laser Doppler Velocimetry Technique

Massimiliano Annoni, Loredana Cristaldi, Michele Norgia, Cesare Svelto

ESDA 2006; 839-846doi:https://doi.org/10.1115/ESDA2006-95537

Abstract

View Article

PDF

Topics: Laser Doppler anemometry , Water , Nozzles , Cutting , Resolution (Optics)

Artificial Neural Networks Modeling of Surface Finish in Electro-Discharge Machining of Tool Steels

A. Markopoulos, N. M. Vaxevanidis, G. Petropoulos, D. E. Manolakos

ESDA 2006; 847-854doi:https://doi.org/10.1115/ESDA2006-95609

Abstract

View Article

PDF

Topics: Artificial neural networks , Finishes , Machining , Modeling , Tool steel , Electrical discharge machining , Surface roughness , Algorithms , Electrodes , Evaporation

Manufacturing of Parts in Ultra High Strength Steel Using Local Heat Treatment

Bjo¨rn Carlsson, Domenico Russo, Jesu´s Arin˜o Oliver

ESDA 2006; 855-858doi:https://doi.org/10.1115/ESDA2006-95614

Abstract

View Article

PDF

Topics: Heat treating (Metalworking) , High strength steel , Manufacturing , Blanks , Fracture (Materials) , Fracture (Process) , Risk , Tensile strength , Cooling , Heat

Influence of Fibre Heating in PMC Production Technology

A. Gisario, F. Quadrini, V. Tagliaferri

ESDA 2006; 859-863doi:https://doi.org/10.1115/ESDA2006-95619

Abstract

View Article

PDF

Topics: Fibers , Heating , Manufacturing technology , Composite materials , Lamination , Glass fibers , Laminates , Manufacturing , Mechanical testing , Resins

An Experimental and Numerical Study to Analysis and Design of Sheet Hydroforming Process for an Automobile Fender Shell

Mohammad Habibi Parsa, Payam Darbandi

ESDA 2006; 865-869doi:https://doi.org/10.1115/ESDA2006-95622

Abstract

View Article

PDF

Topics: Automobiles , Design , Fluid pressure , Shells , Finite element analysis , Blanks , Boundary-value problems , Engineering simulation , Finite element methods , Finite element model

Particle Tracking in Horizontal Ball Milling

A. Boschetto, A. Ruggiero, F. Veniali, A. La Barbera, C. Colella

ESDA 2006; 871-876doi:https://doi.org/10.1115/ESDA2006-95682

Abstract

View Article

PDF

Topics: Ball milling , Particulate matter , Milling , Ball mills , Equilibrium (Physics) , Errors , Fracture (Materials) , Fracture (Process) , Functional materials , Kinematics

Corner Shaping by Barrel Finishing

A. Boschetto, A. Ruggiero, F. Veniali

ESDA 2006; 877-881doi:https://doi.org/10.1115/ESDA2006-95683

Abstract

View Article

PDF

Topics: Corners (Structural elements) , Tumbling (Metal finishing) , Manufacturing , Ball bearings , Damage , Deburring , Deformation , Design , Electrical discharge machining , Fittings