Volumes | Engineering Systems Design and Analysis | American Society of Mechanical Engineers Digital Collection

Topics: Buckling , Dynamic analysis , Drill strings , Friction , Computer simulation , Stress , Clearances (Engineering) , Compression , Drag (Fluid dynamics) , Dynamics (Mechanics)

Equimomental System and Its Applications

Himanshu Chaudhary, Subir Kumar Saha

ESDA 2006; 33-42https://doi.org/10.1115/ESDA2006-95066

Abstract

View Articletitled, Equimomental System and Its Applications

PDF

Topics: Bearings , Equations of motion , Machinery , Optimization , Performance characterization

Influence of van der Waals Force on the Pull-In Parameters of Cantilever Type Nanoscale Electrostatic Actuators

Asghar Ramezani, Aria Alasty, Javad Akbari

ESDA 2006; 43-49https://doi.org/10.1115/ESDA2006-95068

Abstract

View Articletitled, Influence of van der Waals Force on the Pull-In Parameters of Cantilever Type Nanoscale Electrostatic Actuators

PDF

Topics: Cantilevers , Electrostatic actuators , Nanoscale phenomena , Van der Waals forces , Switches , Deflection , Cantilever beams , Design , Integral equations , Nanoelectromechanical systems

A Multi-Level Approach for the Mechanical Design of Cluster Mills for Cold Rolling of Thin Steel Products

Eugenio G. M. Brusa, Luca Lemma

ESDA 2006; 51-61https://doi.org/10.1115/ESDA2006-95075

Abstract

View Articletitled, A Multi-Level Approach for the Mechanical Design of Cluster Mills for Cold Rolling of Thin Steel Products

PDF

Topics: Cold rolling , Design engineering , Steel products , Approximation , Dynamics (Mechanics) , Simulation , Stiffness , Strips

A Decentralized Adaptive Neural Controller for Active Vehicle Suspension Systems

Kuo-Ching Chiou, Shiuh-Jer Huang

ESDA 2006; 63-68https://doi.org/10.1115/ESDA2006-95083

Abstract

View Articletitled, A Decentralized Adaptive Neural Controller for Active Vehicle Suspension Systems

PDF

Topics: Control equipment , Stability , Suspension systems

Calibration of the Tight Seal of the Discharge Mechanism Doors on a Rail Wagon Using Adjustable Members

Jesus A. Mendoza, Luis L. Otero

ESDA 2006; 69-76https://doi.org/10.1115/ESDA2006-95102

Abstract

View Articletitled, Calibration of the Tight Seal of the Discharge Mechanism Doors on a Rail Wagon Using Adjustable Members

PDF

Topics: Calibration , Doors , Rails

Optimal Design of Suspension Parameters of Flexible Multibody Vehicle Model Based on ADAMS Software and Improved Genetic Algorithms

Jingjun Zhang, Yang Sun, Ruizhen Gao

ESDA 2006; 77-82https://doi.org/10.1115/ESDA2006-95105

Abstract

View Articletitled, Optimal Design of Suspension Parameters of Flexible Multibody Vehicle Model Based on ADAMS Software and Improved Genetic Algorithms

PDF

Topics: Computer software , Design , Genetic algorithms , Vehicles , Degrees of freedom , Optimization

Stochastic Analysis of Free Vibrations in Piezoelectric Bimorphs

Alberto Borboni, Diego De Santis, Rodolfo Faglia

ESDA 2006; 83-91https://doi.org/10.1115/ESDA2006-95117

Abstract

View Articletitled, Stochastic Analysis of Free Vibrations in Piezoelectric Bimorphs

PDF

Topics: Free vibrations , Errors , Deformation , Electric potential , Weibull distribution , Actuators , Approximation , Blades , Circuits , Displacement

Analysis of Shock Absorber Characteristics for Drillstrings

M. A. Elsayed, Cherif Aissi

ESDA 2006; 93-101https://doi.org/10.1115/ESDA2006-95141

Abstract

View Articletitled, Analysis of Shock Absorber Characteristics for Drillstrings

PDF

Topics: Drill strings , Shock absorbers , Vibration , Damping , Drilling , Springs , Construction , Damage , Design , Drills (Tools)

Diagnosing Faults of Angular Contact Ball Bearing

Ahmad Ghanbari, Sohrab Khanmohamadi, Ghasem Alizadeh, Mohsen Bahrami

ESDA 2006; 103-109https://doi.org/10.1115/ESDA2006-95151

Abstract

View Articletitled, Diagnosing Faults of Angular Contact Ball Bearing

PDF

Topics: Ball bearings , Bearings , Motors , Torque , Actuators , Contamination , Dimensions , Gages , Geometry

Dynamics of Beams Using a Geometrically Exact Elastic Rod Approach

Fredy Coral Alamo, Hans Ingo Weber

ESDA 2006; 111-120https://doi.org/10.1115/ESDA2006-95158

Abstract

View Articletitled, Dynamics of Beams Using a Geometrically Exact Elastic Rod Approach

PDF

Topics: Dynamics (Mechanics) , Deformation , Displacement , Compression , Differential equations , Dynamic response , Finite element analysis , Modeling , Nonlinear equations , Shear (Mechanics)

Identification of Distributed Unbalanced Mass in Flexible Rotors

Aria Alasty, Mohammad Malekian

ESDA 2006; 121-128https://doi.org/10.1115/ESDA2006-95160

Abstract

View Articletitled, Identification of Distributed Unbalanced Mass in Flexible Rotors

PDF

Topics: Rotors , Computer simulation , Deflection , Rotational inertia

Optimal Feedback-Adaptive Feedforward Controller for Vibration Suppression of a Cantilever Beam Using Piezo-Actuators

Omid Kazemi, Hassan Sayyaadi, Mehdi Behzad

ESDA 2006; 129-136https://doi.org/10.1115/ESDA2006-95197

Abstract

View Articletitled, Optimal Feedback-Adaptive Feedforward Controller for Vibration Suppression of a Cantilever Beam Using Piezo-Actuators

PDF

Topics: Cantilever beams , Control equipment , Feedback , Feedforward control , Piezoelectric actuators , Vibration suppression , Algorithms , Vibration , Actuators , Filtration

Modeling and Analysis of a Power Transmission System: Influences in Tooth Contact Analysis of the Gears

Carlos Garci´a-Masia´, Pierre Ceresa, Juan D. Morillas-A´lvarez

ESDA 2006; 137-141https://doi.org/10.1115/ESDA2006-95207

Abstract

View Articletitled, Modeling and Analysis of a Power Transmission System: Influences in Tooth Contact Analysis of the Gears

PDF

Topics: Gears , Modeling , Simulation , Errors , Manufacturing , Deformation , Kinematics , Stress , Vibration , Bearings

Chaos Synchronization in a Class of Chaotic Systems Using Kalman Filter and Feedback Linearization Methods

Hassan Salarieh, Aria Alasty

ESDA 2006; 143-148https://doi.org/10.1115/ESDA2006-95214

Abstract

View Articletitled, Chaos Synchronization in a Class of Chaotic Systems Using Kalman Filter and Feedback Linearization Methods

PDF

Topics: Chaos synchronization , Feedback , Kalman filters , Control equipment , Dynamic systems , Noise (Sound)

Dynamical Analysis of a Flexible Multibody System: Lagrangian Approach

Alexis Mouhingou, Naoufel Azouz

ESDA 2006; 149-158https://doi.org/10.1115/ESDA2006-95216

Abstract

View Articletitled, Dynamical Analysis of a Flexible Multibody System: Lagrangian Approach

PDF

Topics: Modeling , Multibody systems

Free Vibration Characteristics of SPR Joints

Xiaocong He, Ian Pearson, Ken Young

ESDA 2006; 159-167https://doi.org/10.1115/ESDA2006-95219

Abstract

View Articletitled, Free Vibration Characteristics of SPR Joints

PDF

Topics: Advanced materials , Aluminum alloys , Deformation , Free vibrations , Mode shapes , Poisson ratio , Riveting , Stress , Vibration , Young's modulus

Dynamic Behavior Analysis of a Floating Artificial Base-Building Assumed as Hybrid Structure Due to Wave Forces

Osamu Saijo, Hiroaki Eto, Koichi Maruyoshi

ESDA 2006; 169-176https://doi.org/10.1115/ESDA2006-95235

Abstract

View Articletitled, Dynamic Behavior Analysis of a Floating Artificial Base-Building Assumed as Hybrid Structure Due to Wave Forces

PDF

Topics: Wave forces , Dynamic response analysis , Elastic plates , Finite element methods , Finite element model , Oscillations , Structural response analysis , Wave motion , Waves

Dynamic Simulation Technique for Prediction of Stress on Element of Metal Pushing V-Belt Under CVT Operation

Toshihiro Saito

ESDA 2006; 177-183https://doi.org/10.1115/ESDA2006-95258

Abstract

View Articletitled, Dynamic Simulation Technique for Prediction of Stress on Element of Metal Pushing V-Belt Under CVT Operation

PDF

Topics: Metals , Simulation , Stress , V-belts , Stress concentration , Deformation , Durability , Finite element methods , Inertia (Mechanics) , Pulleys

On the Resolution of Existing Discontinuities in the Dynamic Responses of an Euler-Bernoulli Beam Subjected to the Moving Mass

M. H. Kargarnovin, K. Saeedi

ESDA 2006; 185-194https://doi.org/10.1115/ESDA2006-95264

Abstract

View Articletitled, On the Resolution of Existing Discontinuities in the Dynamic Responses of an Euler-Bernoulli Beam Subjected to the Moving Mass

PDF

Topics: Dynamic response , Resolution (Optics) , Differential equations , Distributed parameter systems , Shear (Mechanics)

Robust Biaxial Contouring Controller Design Incorporating Frictional Dynamics

Kuan-Chen Lin, Chieh-Li Chen

ESDA 2006; 195-202https://doi.org/10.1115/ESDA2006-95273

Abstract

View Articletitled, Robust Biaxial Contouring Controller Design Incorporating Frictional Dynamics

PDF

Topics: Control equipment , Design , Dynamics (Mechanics) , Friction , Uncertainty , Errors , Stress , Feedback , Modeling , Robustness

Design of Trajectories With Physical Constraints for Very Lightweight Single Link Flexible Arms

Francisco Ramos, Vicente Feliu, Ismael Payo

ESDA 2006; 203-212https://doi.org/10.1115/ESDA2006-95289

Abstract

View Articletitled, Design of Trajectories With Physical Constraints for Very Lightweight Single Link Flexible Arms

PDF

Topics: Design , Motors , Actuators , Deflection , Feedforward control , Robotics , Robots , Torque , Vibration

Dynamic Behaviour of Human Body During Operation of Mobile Machines

Sirpa Launis, Simo-Pekka Leino, Juha M. Kortelainen

ESDA 2006; 213-220https://doi.org/10.1115/ESDA2006-95294

Abstract

View Articletitled, Dynamic Behaviour of Human Body During Operation of Mobile Machines

PDF

Topics: Machinery , Control equipment , Excitation , Vibration , Degrees of freedom , Delays , Shock (Mechanics) , Simulation , Simulation models , Stress

Transformer Eddy Current Dampers for the Vibration Control of Rotating Machines

Nicola Amati, Stefano Carabelli, Pietro Macchi, Mario Silvani, Andrea Tonoli

ESDA 2006; 221-230https://doi.org/10.1115/ESDA2006-95335

Abstract

View Articletitled, Transformer Eddy Current Dampers for the Vibration Control of Rotating Machines

PDF

Topics: Dampers , Eddies (Fluid dynamics) , Eddy currents (Electricity) , Machinery , Vibration control , Circuits , Mechanical structures , Design , Electromagnets , Magnetic fields

Oil Whip and Unstable Whirling in Anisotropic Rotors on Lubricated Bearings

Giancarlo Genta, Nicola Amati

ESDA 2006; 231-240https://doi.org/10.1115/ESDA2006-95337

Abstract

View Articletitled, Oil Whip and Unstable Whirling in Anisotropic Rotors on Lubricated Bearings

PDF

Topics: Anisotropy , Bearings , Rotors , Whirls , Dynamics (Mechanics) , Finite element methods , Finite element model , Stability

Prediction of Dry-Friction Whirl and Whip Between a Rotor and a Stator

Dara W. Childs, Avijit Bhattacharya

ESDA 2006; 241-251https://doi.org/10.1115/ESDA2006-95342

Abstract

View Articletitled, Prediction of Dry-Friction Whirl and Whip Between a Rotor and a Stator

PDF

Topics: Dry-friction whip and whirl , Rotors , Stators , Whirls , Coulombs , Engineering simulation , Friction , Simulation , Computer simulation , Simulation results

A Realistic Model for Visco-Elastic Contact Between Spherical Particles

Mohammad Hadi Bordbar, Timo Hyppanen

ESDA 2006; 253-262https://doi.org/10.1115/ESDA2006-95344

Abstract

View Articletitled, A Realistic Model for Visco-Elastic Contact Between Spherical Particles

PDF

Topics: Particulate matter , Collisions (Physics) , Finite element analysis , Bridges (Structures) , Constitutive equations , Deformation , Energy dissipation , Stress

Effects of Mechanical and Pneumatic Return Springs on Valve Train Dynamics

Stefano Pastorelli, Andrea Almondo, Massimo Sorli

ESDA 2006; 263-271https://doi.org/10.1115/ESDA2006-95366

Abstract

View Articletitled, Effects of Mechanical and Pneumatic Return Springs on Valve Train Dynamics

PDF

Topics: Dynamics (Mechanics) , Springs , Trains , Valves , Camshafts , Circuits , Design , Dynamic analysis , Engines , Pressure control

Wave-Based Control of a Nonlinear Flexible System

William J. O’Connor, Francisco Ramos, Vicente Feliu

ESDA 2006; 273-280https://doi.org/10.1115/ESDA2006-95391

Abstract

View Articletitled, Wave-Based Control of a Nonlinear Flexible System

PDF

Topics: Flexible systems , Waves , Actuators , Errors , Computer simulation , Control systems , Deflection , Gantry cranes , Modeling , Robots

Flow Induced Vibrations of Pressure Let-Down Station in QATARGAS

Mohammed Y. Qaradawi, Abdulaziz R. Moshaweh

ESDA 2006; 281-288https://doi.org/10.1115/ESDA2006-95397

Abstract

View Articletitled, Flow Induced Vibrations of Pressure Let-Down Station in QATARGAS

PDF

Topics: Flow (Dynamics) , Pressure , Vibration , Pipes , Flow-induced vibrations , Pipelines , Fluids , Safety , Stability , Fluid pressure

Transfer Function Modeling of a Flexible Gear Train

Irit Peled, Yoram Halevi

ESDA 2006; 289-295https://doi.org/10.1115/ESDA2006-95410

Abstract

View Articletitled, Transfer Function Modeling of a Flexible Gear Train

PDF

Topics: Gear trains , Modeling , Transfer functions , Dimensions , Approximation , Blocks (Building materials) , Delays , Design , Dynamic models , Feedback

Overtaking Stationary and Moving Obstacles for Autonomous Ground Vehicles

Ghasem Amini Javid, Mohammad Durali, Alireza Kasaaizadeh

ESDA 2006; 297-305https://doi.org/10.1115/ESDA2006-95437

Abstract

View Articletitled, Overtaking Stationary and Moving Obstacles for Autonomous Ground Vehicles

PDF

Topics: Vehicles , Control equipment , Trajectories (Physics) , Design , Artificial neural networks , Dynamic models , Noise (Sound) , Safety , Uncertainty

Delayed Feedback Control in Bilateral Teleoperation

Naci Zafer

ESDA 2006; 307-311https://doi.org/10.1115/ESDA2006-95440

Abstract

View Articletitled, Delayed Feedback Control in Bilateral Teleoperation

PDF

Topics: Delays , Feedback , Stability , Control equipment , Internet , Manipulators , System dynamics , Time delay systems

Adaptive Control of the Closed Loop Behaviour of Manufacturing Processes

Tim Wilkin, Yakov Frayman, Bernard Rolfe

ESDA 2006; 313-321https://doi.org/10.1115/ESDA2006-95444

Abstract

View Articletitled, Adaptive Control of the Closed Loop Behaviour of Manufacturing Processes

PDF

Topics: Adaptive control , Manufacturing , Control equipment , Dynamics (Mechanics) , Design , Stability , Closed loop systems , Excitation , Pareto optimization , Robust control

Robust Piecewise-Linear State Observers for Flexible Link Mechanisms

Roberto Caracciolo, Dario Richiedei, Alberto Trevisani

ESDA 2006; 323-332https://doi.org/10.1115/ESDA2006-95445

Abstract

View Articletitled, Robust Piecewise-Linear State Observers for Flexible Link Mechanisms

PDF

Topics: State estimation , Closed loop systems , Dynamics (Mechanics) , Equilibrium (Physics) , Stability , Approximation , Chain , Design , Eigenvalues , Poles (Building)

Numerical Model of a Tensioner for Undersea Pipes Laying

Giuliana Mattiazzo, Andrea Almondo, Stefano Mauro, Paolo Serena Guinzio, Massimo Sorli

ESDA 2006; 333-340https://doi.org/10.1115/ESDA2006-95457

Abstract

View Articletitled, Numerical Model of a Tensioner for Undersea Pipes Laying

PDF

Topics: Computer simulation , Pipes , Modeling , Ocean engineering , Servomotors , Simulation , Stiffness , Torque

Stochastic Reliability Based Design Criteria for Linear Structure Subject to Random Vibrations

G. C. Marano, F. Trentadue, B. Chiaia

ESDA 2006; 341-348https://doi.org/10.1115/ESDA2006-95458

Abstract

View Articletitled, Stochastic Reliability Based Design Criteria for Linear Structure Subject to Random Vibrations

PDF

Topics: Design , Random vibration , Reliability , Stress , Vibration , Dampers , Displacement , Excitation , Failure , Machinery

A Modal-Geometrical Selection Criterion in Dynamic Condensation Techniques

Cristiana Delprete, Elvio Bonisoli, Carlo Rosso

ESDA 2006; 349-356https://doi.org/10.1115/ESDA2006-95469

Abstract

View Articletitled, A Modal-Geometrical Selection Criterion in Dynamic Condensation Techniques

PDF

Topics: Condensation

Optimal H-Infinity Control of Ship Heading

M. J. Mahjoob, M. Poursina, A. Kashani Nia

ESDA 2006; 357-362https://doi.org/10.1115/ESDA2006-95488

Abstract

View Articletitled, Optimal H-Infinity Control of Ship Heading

PDF

Topics: Ships , Transfer functions , Uncertainty , Control equipment , Design , Robust control , Robustness

Assessment of a Robust Algorithm for the Detection and Diagnosis of Additive Faults

Vasilis K. Dertimanis, Dimitris V. Koulocheris, Constantinos N. Spentzas

ESDA 2006; 363-372https://doi.org/10.1115/ESDA2006-95494

Abstract

View Articletitled, Assessment of a Robust Algorithm for the Detection and Diagnosis of Additive Faults

PDF

Topics: Algorithms , Actuators , Dynamic systems , Excitation , Fault diagnosis , Noise (Sound) , Robustness , Sensors

Task Specified Control of a Compliant Parallel Arm Mechanism

Ays¸e Tekes¸, U¨mit So¨nmez, Bilin Aksun Gu¨venc¸

ESDA 2006; 373-382https://doi.org/10.1115/ESDA2006-95500

Abstract

View Articletitled, Task Specified Control of a Compliant Parallel Arm Mechanism

PDF

Topics: Cantilever beams , Compliant mechanisms , Control equipment , Damping , Deflection , Design , Dynamic response , Dynamics (Mechanics) , Euler-Bernoulli beam theory , Indexing (Machining)

Parametric Identification of Vehicle’s Vertical Dynamics Using Vector Autoregressive Moving Average Models

Dimitris V. Koulocheris, Vasilis K. Dertimanis

ESDA 2006; 383-391https://doi.org/10.1115/ESDA2006-95515

Abstract

View Articletitled, Parametric Identification of Vehicle’s Vertical Dynamics Using Vector Autoregressive Moving Average Models

PDF

Topics: Dynamics (Mechanics) , Vehicles , Stability , Algorithms , Noise (Sound) , Optimization algorithms

Simulation and Experimental Study in Position Control of Servo Hydraulic System With Flexible Load Using Adaptive Neural Network and Differential Evolution Strategy

Hassan Yousefi, Heikki Handroos

ESDA 2006; 393-402https://doi.org/10.1115/ESDA2006-95527

Abstract

View Articletitled, Simulation and Experimental Study in Position Control of Servo Hydraulic System With Flexible Load Using Adaptive Neural Network and Differential Evolution Strategy

PDF

Topics: Artificial neural networks , Hydraulic drive systems , Position control , Servomechanisms , Simulation , Stress

Suppression of Brake Squeal Using Shunted Piezoceramics

Marcus Neubauer, Robert Oleskiewicz

ESDA 2006; 403-412https://doi.org/10.1115/ESDA2006-95540

Abstract

View Articletitled, Suppression of Brake Squeal Using Shunted Piezoceramics

PDF

Topics: Brakes , Piezoelectric ceramics , Capacitance , Automotive brakes , Damping , Dynamics (Mechanics) , Engineering simulation , Multibody systems , Simulation , Stability

Forced Response of Interlocked Vane Segments: Numerical Predictions and Experimental Results

Stefano Zucca, Sergio Filippi, Fabio Droetti, Muzio M. Gola

ESDA 2006; 413-420https://doi.org/10.1115/ESDA2006-95551

Abstract

View Articletitled, Forced Response of Interlocked Vane Segments: Numerical Predictions and Experimental Results

PDF

Topics: Aluminum , Damping , Dynamics (Mechanics) , Excitation , Fatigue life , Friction , Resonance , Stiffness , Turbomachinery , Vibration

Design of Noncircular Gears to Minimise Shaft Accelerations

Libardo V. Vanegas Useche, Magd M. Abdel Wahab, Graham A. Parker

ESDA 2006; 421-430https://doi.org/10.1115/ESDA2006-95560

Abstract

View Articletitled, Design of Noncircular Gears to Minimise Shaft Accelerations

PDF

Topics: Design , Gears , Pressure , Rotation , Shapes , Stress , Tradeoffs

Theoretical Model for the Dynamics of an Unconstrained Cutting Brush of a Street Sweeper

Libardo V. Vanegas Useche, Magd M. Abdel Wahab, Graham A. Parker

ESDA 2006; 431-440https://doi.org/10.1115/ESDA2006-95563

Abstract

View Articletitled, Theoretical Model for the Dynamics of an Unconstrained Cutting Brush of a Street Sweeper

PDF

Topics: Cutting , Dynamics (Mechanics) , Roads , Deflection , Vibration , Cantilever beams , Equations of motion , Euler-Bernoulli beam theory , Flight , Oscillations

Brush Dynamics: Models and Characteristics

Libardo V. Vanegas Useche, Magd M. Abdel Wahab, Graham A. Parker

ESDA 2006; 441-450https://doi.org/10.1115/ESDA2006-95565

Abstract

View Articletitled, Brush Dynamics: Models and Characteristics

PDF

Topics: Dynamics (Mechanics) , Friction , Modeling , Cycles , Ducts , Oscillations , Roads , Stick-slip , Surface finishing , Surface roughness

Active Suspension Control Synthesis Using Reduced Order Models That Account for the Time Delay Between Road Inputs

R. Michael Van Auken

ESDA 2006; 451-462https://doi.org/10.1115/ESDA2006-95570

Abstract

View Articletitled, Active Suspension Control Synthesis Using Reduced Order Models That Account for the Time Delay Between Road Inputs

PDF

Topics: Delays , Roads , Vehicles , Control algorithms , Wheels , Degrees of freedom , Linear systems , Noise (Sound) , Suspension systems , Vibration

Identification of Spatially Extended Pollution Sources by Means of Blind Sources Separation Algorithms

Luca Cedola, Mauro Villarini, Enzo Fioriti, Maurizio Carlini

ESDA 2006; 463-467https://doi.org/10.1115/ESDA2006-95586

Abstract

View Articletitled, Identification of Spatially Extended Pollution Sources by Means of Blind Sources Separation Algorithms

PDF

Topics: Algorithms , Pollution , Separation (Technology) , Acoustics , Air pollution , Blind source separation , Brain , Earthquakes , Emissions , Monitoring systems

Modelling a Friction Damper: Analysis of the Experimental Data and Comparison With Numerical Results

Christian M. Firrone, Daniele Botto, Muzio M. Gola

ESDA 2006; 469-478https://doi.org/10.1115/ESDA2006-95605

Abstract

View Articletitled, Modelling a Friction Damper: Analysis of the Experimental Data and Comparison With Numerical Results

PDF

Topics: Dampers , Friction , Modeling , Blades , Damping , Dry friction , High cycle fatigue , Turbomachinery , Centrifugal force , Excitation

Analytical Shock Response of a Transversely Point-Loaded Linear Rectangular Plate

R. David Hampton, Kip P. Nygren, Ting H. Li

ESDA 2006; 479-486https://doi.org/10.1115/ESDA2006-95608

Abstract

View Articletitled, Analytical Shock Response of a Transversely Point-Loaded Linear Rectangular Plate

PDF

Topics: Shock (Mechanics) , Vehicles , Damage , Modeling , Finite element analysis , Electronic components , Army , Computer simulation , Damping , Design

Nonlinear Stochastic Controllers for Semiactive and Regenerative Structural Control Systems, With Guaranteed Quadratic Performance Margins

Jeffrey T. Scruggs, Alexandros A. Taflanidis, Wilfred D. Iwan

ESDA 2006; 487-495https://doi.org/10.1115/ESDA2006-95625

Abstract

View Articletitled, Nonlinear Stochastic Controllers for Semiactive and Regenerative Structural Control Systems, With Guaranteed Quadratic Performance Margins

PDF

Topics: Civil engineering , Control equipment , Control systems , Dampers , Damping , Design , Differential equations , Feedback , Noise (Sound) , Pole placement

The Periodic and Chaotic Vibration of Dynamical System With Elastic Pendulum

Danuta Sado

ESDA 2006; 497-504https://doi.org/10.1115/ESDA2006-95636

Abstract

View Articletitled, The Periodic and Chaotic Vibration of Dynamical System With Elastic Pendulum

PDF

Topics: Dynamic systems , Pendulums , Vibration , Bifurcation , Damping , Elasticity , Resonance , Attractors , Chaos , Degrees of freedom

Effect of Damping on the Periodic and Chaotic Vibration of System With Double Pendulum

Danuta Sado, Krzysztof Gajos

ESDA 2006; 505-511https://doi.org/10.1115/ESDA2006-95637

Abstract

View Articletitled, Effect of Damping on the Periodic and Chaotic Vibration of System With Double Pendulum

PDF

Topics: Damping , Pendulums , Vibration , Analytical methods , Bifurcation , Degrees of freedom , Differential equations , Resonance , Stability , Steady state

Innovative Air Estimation and Luenberger Observers in Model Based A/F Control

Cecilia Cannavo`, Roberto Cipollone, Silvio Antonio Pinamonti, Antonio Sciarretta

ESDA 2006; 513-524https://doi.org/10.1115/ESDA2006-95641

Abstract

View Articletitled, Innovative Air Estimation and Luenberger Observers in Model Based A/F Control

PDF

Topics: Control systems , Cycles , Cylinders , Dynamics (Mechanics) , Engines , Errors , Flowmeters , Fuels , Intake manifolds , Oxygen

A MOM-Based Algorithm for Identification of Moving Vehicle Loads on Bridges

L. Yu, T. H. T. Chan, J. H. Zhu, M. Z. Chen

ESDA 2006; 525-532https://doi.org/10.1115/ESDA2006-95672

Abstract

View Articletitled, A MOM-Based Algorithm for Identification of Moving Vehicle Loads on Bridges

PDF

Topics: Algorithms , Bridges (Structures) , Stress , Vehicles , Fourier series , Inverse problems , Method of moments , Noise (Sound) , Polynomials , Simulation

Statistics-Based Noise Analysis for Vibration-Based Damage Identification

L. Yu, T. Yin, H. P. Zhu

ESDA 2006; 533-539https://doi.org/10.1115/ESDA2006-95673

Abstract

View Articletitled, Statistics-Based Noise Analysis for Vibration-Based Damage Identification

PDF

Topics: Damage , Noise (Sound) , Statistics , Vibration , Composite materials , Gates (Closures) , Mode shapes

Structural Damage Identification Based on Model Updating

T. Yin, L. Yu, H. P. Zhu

ESDA 2006; 541-547https://doi.org/10.1115/ESDA2006-95691

Abstract

View Articletitled, Structural Damage Identification Based on Model Updating

PDF

Topics: Damage , Gates (Closures) , Computer simulation , Finite element analysis , Mode shapes , Optimization

Vibration-Based Damage Detection in Structural Members Utilizing Finite Elements and Evolutionary Algorithms

Amir Poursamad

ESDA 2006; 549-556https://doi.org/10.1115/ESDA2006-95697

Abstract

View Articletitled, Vibration-Based Damage Detection in Structural Members Utilizing Finite Elements and Evolutionary Algorithms

PDF

Topics: Damage , Evolutionary algorithms , Finite element analysis , Structural elements (Construction) , Vibration , Finite element methods , Finite element model , Cantilevers , Errors , Mode shapes

Improve Hunting of a Railway Vehicle Using Semi-Active Primary Suspension

Abbas Fotoohi, Aghil Yousefi-Koma

ESDA 2006; 557-564https://doi.org/10.1115/ESDA2006-95700

Abstract

View Articletitled, Improve Hunting of a Railway Vehicle Using Semi-Active Primary Suspension

PDF

Topics: Railway vehicles , Rails , Wheels , Displacement , Actuators , Design , Wheelsets , Control modeling , Creep , Damage

Vibration Control of FGM Plate With Piezoelectric Sensors and Actuators Using Higher Order Shear Deformation Theory

A. Yeilaghi-Tamijani, R. Mirzaeifar, A. R. Ohadi, M. R. Eslami

ESDA 2006; 565-572https://doi.org/10.1115/ESDA2006-95710

Abstract

View Articletitled, Vibration Control of FGM Plate With Piezoelectric Sensors and Actuators Using Higher Order Shear Deformation Theory

PDF

Topics: Actuators , Functionally graded materials , Sensors , Shear deformation , Vibration control , Feedback , Algorithms , Displacement , Active damping , Deflection

An Efficient Modelling of Flexible Airships

Selima Bennaceur, Naoufel Azouz, Djaber Boukraa

ESDA 2006; 573-582https://doi.org/10.1115/ESDA2006-95741

Abstract

View Articletitled, An Efficient Modelling of Flexible Airships

PDF

Topics: Deformation , Modeling , Equations of motion , Fluids , Finite element analysis , Resolution (Optics) , Stiffness

Dynamic Response of Sandwich Panels With a Flexible Core Under Simultaneous Low-Velocity Impacts of Multiple Small Masses

K. Malekzadeh, M. R. Khalili

ESDA 2006; 583-591https://doi.org/10.1115/ESDA2006-95774

Abstract

View Articletitled, Dynamic Response of Sandwich Panels With a Flexible Core Under Simultaneous Low-Velocity Impacts of Multiple Small Masses

PDF

Topics: Dynamic response , Elasticity , Plate theory , Shear deformation , Structural mechanics , Waves

Multibody Performance Optimization of a Formula SAE Car

Renzo Capitani, Daniele G. Rosti, Pierluigi Tozzi

ESDA 2006; 593-602https://doi.org/10.1115/ESDA2006-95790

Abstract

View Articletitled, Multibody Performance Optimization of a Formula SAE Car

PDF

Topics: Optimization , Data acquisition systems , Design , Dynamics (Mechanics) , Experimental design , Kinematics

A Novel Design and Modelling of a Micro Underwater Vehicle With Flapping Fins

Abdorasool Mayahy, Aghil Yousefi-Koma, Hesam Maleki, Donya Mohammadshahi, Sina Salek

ESDA 2006; 603-608https://doi.org/10.1115/ESDA2006-95799

Abstract

View Articletitled, A Novel Design and Modelling of a Micro Underwater Vehicle With Flapping Fins

PDF

Topics: Design , Fins , Modeling , Underwater vehicles

Seismic Analysis of a Turbine on a Spring Isolated Pedestal

Victor V. Kostarev, Andrei V. Petrenko, Peter S. Vasilyev, Alexander S. Lisyansky

ESDA 2006; 609-616https://doi.org/10.1115/ESDA2006-95818

Abstract

View Articletitled, Seismic Analysis of a Turbine on a Spring Isolated Pedestal

PDF

Topics: Seismic analysis , Springs , Turbines , Stress , Bearings , Soil , Accidents , Excitation , Finite element model , Geometry

Coupled Modelling of a “Flow-Piping” System in Dynamic Analysis

Peter S. Vasilyev

ESDA 2006; 617-625https://doi.org/10.1115/ESDA2006-95820

Abstract

View Articletitled, Coupled Modelling of a “Flow-Piping” System in Dynamic Analysis

PDF

Topics: Dynamic analysis , Flow (Dynamics) , Fluid structure interaction , Modeling , Pipes , Seismic analysis

Symposium on Design and Analysis of Advanced Structures

Large Deformation Analysis of Elastic Cosserat Continua by FEM

Ehsan Sharbati, Reza Naghdabadi

ESDA 2006; 627-636https://doi.org/10.1115/ESDA2006-95288

Abstract

View Articletitled, Large Deformation Analysis of Elastic Cosserat Continua by FEM

PDF

Topics: Deformation , Finite element methods , Finite element model , Finite element analysis , Degrees of freedom , Cantilever beams , Constitutive equations , Continuum mechanics , Shear (Mechanics) , Tension

Strength of Adhesive Joints Under Impact Stress Conditions

Luca Goglio, Massimo Rossetto

ESDA 2006; 637-643https://doi.org/10.1115/ESDA2006-95306

Abstract

View Articletitled, Strength of Adhesive Joints Under Impact Stress Conditions

PDF

Topics: Adhesive joints , Stress , Adhesives , Rupture , Shear (Mechanics) , Dynamic testing (Materials) , Epoxy adhesives , Failure , Pendulums , Steel

Crash Structural Improvements in Automotive Vehicles Using Metallic Foams

Daniele Bassan

ESDA 2006; 645-654https://doi.org/10.1115/ESDA2006-95646

Abstract

View Articletitled, Crash Structural Improvements in Automotive Vehicles Using Metallic Foams

PDF

Topics: Automobiles , Metal foams , Manufacturing , Finite element analysis , Vehicles , Absorption , Aluminum , Design , Foams (Chemistry) , Materials science

The Mechanical Behaviour of Aluminium Foam Structures in Different Loading Conditions

Lorenzo Peroni, Massimiliano Avalle, Marco Peroni

ESDA 2006; 655-664https://doi.org/10.1115/ESDA2006-95704

Abstract

View Articletitled, The Mechanical Behaviour of Aluminium Foam Structures in Different Loading Conditions

PDF

Topics: Aluminum , Mechanical behavior , Composite materials , Hydrostatics , Absorption , Foams (Chemistry) , Metals , Stress , Compression , Design

Shear Strength Tests of Joined Advanced Ceramics

Massimiliano Avalle, Andrea Ventrella, Monica Ferraris, Milena Salvo

ESDA 2006; 665-674https://doi.org/10.1115/ESDA2006-95717

Abstract

View Articletitled, Shear Strength Tests of Joined Advanced Ceramics

PDF

Topics: Ceramics , Shear strength , Joining , Testing , Adhesives , ASTM International , Construction , Failure , Finite element analysis , Fuel cells

Comparative Response in Repeated Impact Tests of Hand Lay-Up and Vacuum Infusion Glass Reinforced Composites

Giovanni Belingardi, Maria Pia Cavatorta, Davide Salvatore Paolino

ESDA 2006; 675-682https://doi.org/10.1115/ESDA2006-95752

Abstract

View Articletitled, Comparative Response in Repeated Impact Tests of Hand Lay-Up and Vacuum Infusion Glass Reinforced Composites

PDF

Topics: Composite materials , Glass , Impact testing , Vacuum , Damage , Laminates , Glass reinforced plastics , Manufacturing , Resins , Stiffness

Buckling Topology Optimization of Laminated Multi-Material Composite Structures

Erik Lund

ESDA 2006; 683-692https://doi.org/10.1115/ESDA2006-95753

Abstract

View Articletitled, Buckling Topology Optimization of Laminated Multi-Material Composite Structures

PDF

Topics: Buckling , Composite materials , Optimization , Topology , Design , Shells , Blades , Computer programming , Fibers , Spar platforms

Damage Evolution in Stitched and Unstitched Graphite/Epoxy Laminates Subject to Low-Velocity Impact

Francesco Aymerich, Pierluigi Priolo

ESDA 2006; 693-703https://doi.org/10.1115/ESDA2006-95761

Abstract

View Articletitled, Damage Evolution in Stitched and Unstitched Graphite/Epoxy Laminates Subject to Low-Velocity Impact

PDF

Topics: Damage , Epoxy adhesives , Epoxy resins , Graphite , Laminates , Composite materials , Design , Fibers , Fracture (Materials) , Fracture (Process)

Multi-Level Modeling of Low Velocity, Low Energy Impact on Metal-Skinned Sandwich Structure

B. Castanie´, C. Bouvet, J.-J. Barrau, P. Thevenet

ESDA 2006; 705-714https://doi.org/10.1115/ESDA2006-95766

Abstract

View Articletitled, Multi-Level Modeling of Low Velocity, Low Energy Impact on Metal-Skinned Sandwich Structure

PDF

Topics: Metals , Modeling , Sandwich structures , Honeycomb structures , Compression , Dynamic analysis , Finite element model , Springs

Design Optimization of Anisotropic Pressure Vessels With Manufacturing Uncertainties Accounted For

Mark Walker, Pavel Y. Tabakov

ESDA 2006; 715-724https://doi.org/10.1115/ESDA2006-95767

Abstract

View Articletitled, Design Optimization of Anisotropic Pressure Vessels With Manufacturing Uncertainties Accounted For

PDF

Topics: Anisotropy , Design , Manufacturing , Optimization , Pressure vessels , Uncertainty , Structures , Algorithms , Fibers , Genetic algorithms

Hierarchical Finite Element Analysis of Multilayered Plates Subjected to Mechanical, Thermal and Electrical Loadings

Erasmo Carrera, Christian Fagiano

ESDA 2006; 725-737https://doi.org/10.1115/ESDA2006-95769

Abstract

View Articletitled, Hierarchical Finite Element Analysis of Multilayered Plates Subjected to Mechanical, Thermal and Electrical Loadings

PDF

Topics: Finite element analysis , Plates (structures) , Finite element methods , Laminates , Theorems (Mathematics)

Energy Absorption of Sandwich Panels Subjected to In-Plane Loads

Anders Lindstro¨m, Stefan Hallstro¨m

ESDA 2006; 739-747https://doi.org/10.1115/ESDA2006-95771

Abstract

View Articletitled, Energy Absorption of Sandwich Panels Subjected to In-Plane Loads

PDF

Topics: Absorption , Stress , Damage , Compression , Failure , Balsa wood , Calibration , Delamination , Displacement , Electromagnetic scattering

Impact and Blast Pulse: Improving Energy Absorption of Fibre-Reinforced Composites Through Optimized Tailoring

Ugo Icardi, Laura Ferrero

ESDA 2006; 749-758https://doi.org/10.1115/ESDA2006-95772

Abstract

View Articletitled, Impact and Blast Pulse: Improving Energy Absorption of Fibre-Reinforced Composites Through Optimized Tailoring

PDF

Topics: Absorption , Fiber reinforced composites , Fibers , Stiffness , Damage , Deflection , Delamination , Laminates , Shear stress , Stress

The Design of Advanced Composite Structures Using Evolutionary Design Methods

David van Wyk, David Jonson

ESDA 2006; 759-766https://doi.org/10.1115/ESDA2006-95775

Abstract

View Articletitled, The Design of Advanced Composite Structures Using Evolutionary Design Methods

PDF

Topics: Composite materials , Design , Design methodology , Algorithms , Stress , Optimization , Shells , Shapes , Weight (Mass) , Aircraft

Static Strength of Structural Adhesive Joints: Statistical Analysis and Design Parameter Correlation Based on an Extensive Experimental Campaign

Jaroslaw Adamowski, Carla Gambaro, Enrico Lertora, Margherita Monti

ESDA 2006; 767-774https://doi.org/10.1115/ESDA2006-95776

Abstract

View Articletitled, Static Strength of Structural Adhesive Joints: Statistical Analysis and Design Parameter Correlation Based on an Extensive Experimental Campaign

PDF

Topics: Adhesive joints , Design , Statistical analysis , Failure , Stress , Adhesives , Dimensions , Epoxy adhesives , Geometry , Interpolation

Vibration of Functionally Graded Plates

Serge Abrate

ESDA 2006; 775-782https://doi.org/10.1115/ESDA2006-95778

Abstract

View Articletitled, Vibration of Functionally Graded Plates

PDF

Topics: Plates (structures) , Vibration , Materials properties , Deformation , Free vibrations , Plate theory

Modeling of Composite Material Behavior for Blast and Ballistic Impact

C. F. Yen

ESDA 2006; 783-789https://doi.org/10.1115/ESDA2006-95779

Abstract

View Articletitled, Modeling of Composite Material Behavior for Blast and Ballistic Impact

PDF

Topics: Composite materials , Modeling , Damage , Failure , Armor , Constitutive equations , Design , Engineering simulation , Laminates , Simulation

Low-Velocity Impact on a Functionally Graded Circular Thin Plate

Pantele Chelu, Liviu Librescu

ESDA 2006; 791-800https://doi.org/10.1115/ESDA2006-95784

Abstract

View Articletitled, Low-Velocity Impact on a Functionally Graded Circular Thin Plate

PDF

Topics: Computer simulation , Displacement , Lamination , Materials properties , Plate theory , Plates (structures) , Volterra equations , Wavelets

Influence of Material System, Lay-Up and Thickness on the Energy Absorption Capability of Composite Laminates

Stefano Mian, Marino Quaresimin, Stefano Magistrali

ESDA 2006; 801-809https://doi.org/10.1115/ESDA2006-95787

Abstract

View Articletitled, Influence of Material System, Lay-Up and Thickness on the Energy Absorption Capability of Composite Laminates

PDF

Topics: Absorption , Composite materials , Laminates , Epoxy adhesives , Epoxy resins , Carbon , Glass , ASTM International , Damage , Design

A Model for the Energy Absorption Capability of Composite Laminates

Stefano Mian, Marino Quaresimin

ESDA 2006; 811-816https://doi.org/10.1115/ESDA2006-95788

Abstract

View Articletitled, A Model for the Energy Absorption Capability of Composite Laminates

PDF

Topics: Absorption , Composite materials , Laminates , Electromagnetic scattering , Fibers

Efficient Stress Analysis of Adhesively Bonded Joints by Finite Element Techniques

Davide Castagnetti, Eugenio Dragoni

ESDA 2006; 817-825https://doi.org/10.1115/ESDA2006-95813

Abstract

View Articletitled, Efficient Stress Analysis of Adhesively Bonded Joints by Finite Element Techniques

PDF

Topics: Finite element analysis , Stress analysis (Engineering) , Stress , Adhesives , Finite element model , Performance , String

Tribology

CDT Analysis is Used as a Condition Monitoring Parameter to Study the Tribological Behavior of Bearing Lubricant Under Different Operating Pressure

R. Edwin Browne, K. P. Ramachandran, A. K. M. De Silva, D. K. Harrison

ESDA 2006; 827-837https://doi.org/10.1115/ESDA2006-95021

Abstract

View Articletitled, CDT Analysis is Used as a Condition Monitoring Parameter to Study the Tribological Behavior of Bearing Lubricant Under Different Operating Pressure

PDF

Topics: Bearings , Condition monitoring , Downtime , Lubricants , Pressure , Shorelines , Tribology , Vibration

Fatigue Life Prediction of Optimum Hollowness of Hollow Cylindrical Rollers in Pure Rolling Contact

Wisam M. Abu-Jadayil, Donald R. Flugrad, Abir Z. Qamhiyah

ESDA 2006; 839-846https://doi.org/10.1115/ESDA2006-95036

Abstract

View Articletitled, Fatigue Life Prediction of Optimum Hollowness of Hollow Cylindrical Rollers in Pure Rolling Contact

PDF

Topics: Fatigue life , Rollers , Rolling contact , Steel , Bending (Stress) , Chemical vapor deposition , Deformation , Electromagnetic induction , Endurance limit , Finite element analysis

Thermo-Hydrodynamic Analysis of Rough Journal Bearing

A. Bahzad, L. A. Abdel-Latif, A. M. A. El-Butch

ESDA 2006; 847-856https://doi.org/10.1115/ESDA2006-95076

Abstract

View Articletitled, Thermo-Hydrodynamic Analysis of Rough Journal Bearing

PDF

Topics: Journal bearings , Surface roughness , Thermohydrodynamics , Bearings , Performance characterization , Stress , Heat transfer , Temperature

Multi-Objective Optimisation of Herringbone Grooved Gas Bearings Supporting a High Speed Rotor, Taking Into Account Rarefied Gas and Real Gas Effects

Juerg Schiffmann, Daniel Favrat

ESDA 2006; 857-865https://doi.org/10.1115/ESDA2006-95085

Abstract

View Articletitled, Multi-Objective Optimisation of Herringbone Grooved Gas Bearings Supporting a High Speed Rotor, Taking Into Account Rarefied Gas and Real Gas Effects

PDF

Topics: Gas bearings , Pareto optimization , Rotors , Bearings , Stability , Dynamic stability , Geometry , Refrigerants , Bearing design , Control systems

The Effects of Load and Velocity on Friction and Interface Temperature of CGRP Sliding Against Smooth Stainless Steel

B. F. Yousif, N. S. El-Tayeb, T. F. Yusaf

ESDA 2006; 867-874https://doi.org/10.1115/ESDA2006-95171

Abstract

View Articletitled, The Effects of Load and Velocity on Friction and Interface Temperature of CGRP Sliding Against Smooth Stainless Steel

PDF

Topics: Friction , Stainless steel , Stress , Temperature , Disks , Glass reinforced plastics , Polyester fabrics , Scanning electron microscopy , Strain gages , Thermometers

Double-Cage Constant Power Continuously Variable Transmission (CP-CVT)

Romeo P. Glovnea, Ovidiu S. Cretu

ESDA 2006; 875-882https://doi.org/10.1115/ESDA2006-95212

Abstract

View Articletitled, Double-Cage Constant Power Continuously Variable Transmission (CP-CVT)

PDF

Topics: Automobiles , Construction , Dynamics (Mechanics) , Geometry , Kinematics , Optimization

The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings: Part I — Theory

Niels Heinrichson, Ilmar Ferreira Santos, Axel Fuerst

ESDA 2006; 883-891https://doi.org/10.1115/ESDA2006-95285

Abstract

View Articletitled, The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings: Part I — Theory

PDF

Topics: Thrust bearings , Bearings , High pressure (Physics) , Computer simulation , Dimensions

The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings: Part II — Comparison Between Theory and Experiment

Niels Heinrichson, Axel Fuerst, Ilmar Ferreira Santos

ESDA 2006; 893-901https://doi.org/10.1115/ESDA2006-95287

Abstract

View Articletitled, The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings: Part II — Comparison Between Theory and Experiment

PDF

Topics: Thrust bearings , Stress , Film thickness , Pressure , Computer simulation , High pressure (Physics)

Application of a Finite Element Quasi-3D Solution of the Energy Equation to the TEHD Analysis of Dynamically Loaded Journal Bearings

Fabrizio A. Stefani

ESDA 2006; 903-907https://doi.org/10.1115/ESDA2006-95333

Abstract

View Articletitled, Application of a Finite Element Quasi-3D Solution of the Energy Equation to the TEHD Analysis of Dynamically Loaded Journal Bearings

PDF

Topics: Bearings , Cavitation , Deformation , Finite element analysis , Heat , Journal bearings , Lubricants , Lubrication , Thermoelasticity , Viscosity

Thermo-Elasto-Hydrodynamic Analysis of a Crankshaft Journal Bearing

Filippo M. Lachina, Francesco Cappello, Emanuele Pisano`, Mario V. Durando, Roberto Rivara

ESDA 2006; 909-917https://doi.org/10.1115/ESDA2006-95411

Abstract

View Articletitled, Thermo-Elasto-Hydrodynamic Analysis of a Crankshaft Journal Bearing

PDF

Topics: Journal bearings , Bearings , Modeling , Clearances (Engineering) , Computation , Damage , Displacement , Lubrication theory , Numerical analysis , Reliability

Traction of Synthetic Traction Fluids and Its Related Rheological Properties

Masayoshi Muraki, Ryuta Kawabata

ESDA 2006; 919-926https://doi.org/10.1115/ESDA2006-95434

Abstract

View Articletitled, Traction of Synthetic Traction Fluids and Its Related Rheological Properties

PDF

Topics: Fluids , Rheology , Traction , Pressure , Shear stress , Oils , Particle spin , Petroleum , Rollers , Rotation

Modeling Run in Process in External Gear Pumps

G. Dalpiaz, G. D’Elia, E. Mucchi, A. Ferna´ndez del Rinco´n

ESDA 2006; 927-936https://doi.org/10.1115/ESDA2006-95466

Abstract

View Articletitled, Modeling Run in Process in External Gear Pumps

PDF

Topics: Gear pumps , Modeling , Pressure , Gears , Wear , Clearances (Engineering) , Equilibrium (Physics) , Journal bearings , Manufacturing , Optimization

Experimental Analysis of Orifice Type Thrust Bearing

Charanjeet Kaur Malhi, Trupti Cherian

ESDA 2006; 937-941https://doi.org/10.1115/ESDA2006-95477

Abstract

View Articletitled, Experimental Analysis of Orifice Type Thrust Bearing

PDF

Topics: Experimental analysis , Thrust bearings

Microstructural Effects on the Wear Resistance of Co-Cr Implant Alloys

S. Affatato, W. Leardini, A. Jedenmalm, M. Zavalloni, O. Ruggeri, F. Tarterini, M. Viceconti

ESDA 2006; 943-951https://doi.org/10.1115/ESDA2006-95510

Abstract

View Articletitled, Microstructural Effects on the Wear Resistance of Co-Cr Implant Alloys

PDF

Topics: Alloys , Wear resistance , Metals , Wear , Cobalt , Cycles , Grain size , Hip joint prostheses , Lubricants , Lubrication

Effect of Head Surface Roughness and Sterilization Method on Wear of UHMWPE Acetabular Cups: Preliminary Hip Joint Simulator Results

Anneli Jedenmalm, Walther Leardini, Mara Zavalloni, Saverio Affatato

ESDA 2006; 953-961https://doi.org/10.1115/ESDA2006-95512

Abstract

View Articletitled, Effect of Head Surface Roughness and Sterilization Method on Wear of UHMWPE Acetabular Cups: Preliminary Hip Joint Simulator Results

PDF

Topics: Hip joint prostheses , Sterilization , Surface roughness , Wear

Numerical Simulation of Wear in Railway Wheel Profiles

Abdelrahim S. Abeidi, Nicola Bosso, Antonio Gugliotta, Aurelio Soma`

ESDA 2006; 963-977https://doi.org/10.1115/ESDA2006-95571

Abstract

View Articletitled, Numerical Simulation of Wear in Railway Wheel Profiles

PDF

Topics: Computer simulation , Rail wheels , Wear , Wheelsets , Shapes , Stress , Damage , Finite element analysis , Railway vehicles , Stress concentration

Experimental Study on Wear and Fracture in Aeronautical Gear Transmissions

Roberto Bassani, Enrico Ciulli, Enrico Manfredi, Salvatore Manconi, Alessandro Polacco, Giovanni Pugliese

ESDA 2006; 979-986https://doi.org/10.1115/ESDA2006-95720

Abstract

View Articletitled, Experimental Study on Wear and Fracture in Aeronautical Gear Transmissions

PDF

Topics: Fracture (Materials) , Fracture (Process) , Gears , Wear , Damage , Stress , Computer software , Computers , Gear teeth , Geometry

Tribomaterial Evaluation and Ranking Using Fuzzy Multicriteria Decision Making

M. F. Wani

ESDA 2006; 987-993https://doi.org/10.1115/ESDA2006-95732

Abstract

View Articletitled, Tribomaterial Evaluation and Ranking Using Fuzzy Multicriteria Decision Making

PDF

Topics: Decision making , Plain bearings

An Experimental Study on a High-Speed Rotor Supported by Air Bearings Mounted on O-Rings

G. Belforte, T. Raparelli, V. Viktorov, F. Colombo

ESDA 2006; 995-1000https://doi.org/10.1115/ESDA2006-95809

Abstract

View Articletitled, An Experimental Study on a High-Speed Rotor Supported by Air Bearings Mounted on O-Rings

PDF

Topics: Air bearings , Rotors , Seals , Bearings , Whirls , Stability , Bushings , Capacitance , Damping , Displacement

Feeding System of Aerostatic Bearings With Porous Media

G. Belforte, T. Raparelli, V. Viktorov, A. Trivella

ESDA 2006; 1001-1009https://doi.org/10.1115/ESDA2006-95810

Abstract

View Articletitled, Feeding System of Aerostatic Bearings With Porous Media

PDF

Topics: Bearings , Porous materials , Flow (Dynamics) , Pressure , Darcy's law , Gas bearings , Permeability , Approximation , Bronze , Particulate matter

All Years

Proceedings Papers

Dynamic Systems and Controls

Symposium on Design and Analysis of Advanced Structures

Tribology

Email alerts

Most Read Proceedings Papers in ESDA

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only