Volumes | Engineering Systems Design and Analysis | American Society of Mechanical Engineers Digital Collection

Topics: Design , Energy / power systems , Optimization , Stress , Thermoeconomics , Control systems , Algorithms , Emissions , Flow (Dynamics) , Fuel consumption

Specific Performance Calculations of Two Types of Space Solar Power Systems

Masao Furukawa

ESDA 2006; 45-59doi:https://doi.org/10.1115/ESDA2006-95107

Abstract

View Article

PDF

Topics: Lasers , Microwaves , Solar space applications

Design and Experimental Investigation of a Diffusion Absorption Refrigeration System

Shiming Xu, Jian Liang, Yi Jian He, Ru Xu Du

ESDA 2006; 61-69doi:https://doi.org/10.1115/ESDA2006-95130

Abstract

View Article

PDF

Topics: Absorption , Design , Diffusion (Physics) , Refrigeration , Pumps , Bubbles , Air conditioning , Cooling , Engineering prototypes , Experimental analysis

Optimization Analysis of Alternate Tube Section for Pulse Tube Refrigerators

A. Jafarian, M. H. Saidi, S. K. Hannani

ESDA 2006; 71-78doi:https://doi.org/10.1115/ESDA2006-95138

Abstract

View Article

PDF

Topics: Entropy , Flow (Dynamics) , Heat , Momentum , Optimization , Oscillations , Reynolds number , Temperature , Temperature gradient , Viscosity

New Methods of Increasing Efficiency of Steam Turbine Plants

Aleksandr A. Vasserman, Maxim A. Shutenko

ESDA 2006; 79-87doi:https://doi.org/10.1115/ESDA2006-95156

Abstract

View Article

PDF

Topics: Carbon dioxide , Oxygen , Steam turbines

A Compact Dynamic Model for Vapor Compression Refrigerated Systems

Luca A. Tagliafico, Federico Scarpa, Maurizio Senarega

ESDA 2006; 89-97doi:https://doi.org/10.1115/ESDA2006-95221

Abstract

View Article

PDF

Topics: Compression , Compressors , Cycles , Dynamic models , Fluids , Heat , Heat capacity , Heat transfer , Simulation , Specific heat

Design and Analysis of the Basic Components in a SOFC Anode Cycle

Davide Bernardi, Rowland Travis

ESDA 2006; 99-105doi:https://doi.org/10.1115/ESDA2006-95282

Abstract

View Article

PDF

Topics: Anodes , Cycles , Design , Solid oxide fuel cells , Fuel cells , Fuels , Ejectors , Exhaust systems , Temperature , Carbon

Anamnesis for Improving Thermoeconomic Diagnosis: The Case of a 3×350 MW Coal-Fired Power Plant

Sergio Uso´n, Luis Correas, Antonio Valero

ESDA 2006; 107-114doi:https://doi.org/10.1115/ESDA2006-95341

Abstract

View Article

PDF

Topics: Coal , Power stations , Thermoeconomics , Fuel consumption , Measurement uncertainty , Algorithms , Design , Energy / power systems , Errors , Fuels

CO₂ Capture for Power Plants: An Analysis of the Energetic Requirements by Chemical Absorption

Ana R. Diaz

ESDA 2006; 115-124doi:https://doi.org/10.1115/ESDA2006-95372

Abstract

View Article

PDF

Topics: Absorption , Carbon capture and storage , Power stations

Development of Membrane Contactors for Greenhouse Climate Control

Giulio M. Lo Presti, Carloandrea Malvicino, Stefano Mola, Nunzio Mastrodomenico, Matteo M. Rostagno

ESDA 2006; 125-129doi:https://doi.org/10.1115/ESDA2006-95393

Abstract

View Article

PDF

Topics: Climate , Membranes , Water , Air conditioning , Condensation , Cooling , Cooling systems , Irrigation (Agriculture) , Temperature , Vapors

Modeling of Closed Loop Pulsating Heat Pipes by Neural Networks

Hossein Shokouhmand, Nima Gharib, Hafez Bahrami

ESDA 2006; 131-136doi:https://doi.org/10.1115/ESDA2006-95417

Abstract

View Article

PDF

Topics: Artificial neural networks , Fluids , Heat pipes , Modeling , Thermal resistance

SOFC-MGT Hybrid Power Plants Fuelled by Methane and Methanol

Daniele Cocco, Vittorio Tola

ESDA 2006; 137-147doi:https://doi.org/10.1115/ESDA2006-95482

Abstract

View Article

PDF

Topics: Fuel cells , Hybrid power systems , Methane , Methanol , Solid oxide fuel cells

Gas Driven Micro-Cogenerator Incorporating Heat Pump: Exergetic, Economic and Environmental Analysis

Raffaello Possidente, Carlo Roselli, Maurizio Sasso, Sergio Sibilio

ESDA 2006; 149-154doi:https://doi.org/10.1115/ESDA2006-95509

Abstract

View Article

PDF

Topics: Cooling , Heat pumps , Heating , Internal combustion engines , Combined heat and power , Diffusion (Physics) , Electricity (Physics) , Gas air conditioning , Heating and cooling , HVAC equipment

Vapour Compression and Liquid Desiccant Hybrid System for Air Conditioning

Stefano Bergero, Anna Chiari, Enrico Nannei

ESDA 2006; 155-163doi:https://doi.org/10.1115/ESDA2006-95541

Abstract

View Article

PDF

Topics: Air conditioning , Compression , Cycles , Membranes , Condensers (steam plant) , Cooling , Dehumidification , Engineering simulation , Heat , Refrigerants

Development and Assessment of Defrosting Strategies for Transport Refrigeration Systems

Wayne J. Donnellan, John Lohan, Ken Gleeson

ESDA 2006; 165-173doi:https://doi.org/10.1115/ESDA2006-95567

Abstract

View Article

PDF

Topics: Refrigeration , Cycles , Compressors , Fuel efficiency , Temperature , Temperature control

Climate Variables That Influence the Thermal Performance of Horizontal Collector Ground Source Heat Pumps

John Lohan, Niall Burke, Michael Greene

ESDA 2006; 175-183doi:https://doi.org/10.1115/ESDA2006-95589

Abstract

View Article

PDF

Topics: Climate , Heat pumps , Soil , Heat transfer , Fluctuations (Physics) , Performance characterization , Test facilities , Thermal conductivity , Thermal energy , Thermal stability

Performance Evaluation of a Small Scale High Efficiency Cogeneration System

Mauro Reini

ESDA 2006; 185-195doi:https://doi.org/10.1115/ESDA2006-95650

Abstract

View Article

PDF

Topics: Combined heat and power , Performance evaluation , Cycles , Microturbines , Organic Rankine cycle , Combined cycles , Fluids , Advanced materials , Exhaust systems , Gases

Experimental Investigations on Temperature Distribution Along the Liner Wall and Centerline of Small Capacity Gas Turbine Combustion Chamber for Fuel Rich to Fuel Lean Air/Fuel Ratios at Equivalence Ratio of 1

Digvijay B. Kulshreshtha, S. A. Channiwala

ESDA 2006; 197-202doi:https://doi.org/10.1115/ESDA2006-95664

Abstract

View Article

PDF

Topics: Combustion chambers , Fuels , Gas turbines , Temperature distribution , Temperature profiles , Temperature , Wall temperature , Combustion , Durability , Emissions

Improving the Ethanol Production From Sugar Cane Biomass

Marcelo Modesto, Silvia A. Nebra, Roger J. Zemp

ESDA 2006; 203-210doi:https://doi.org/10.1115/ESDA2006-95685

Abstract

View Article

PDF

Topics: Biomass , Ethanol , Water , Bagasse , Exergy , Combined heat and power , Compression , Cylinders , Energy consumption , Fuels

Multi-Point Energy and Exergy Analysis of a 1.5 MWe Hybrid SOFC-GT Power Plant

Francesco Calise, Massimo Dentice d’Accadia, Laura Vanoli, Michael R. von Spakovsky

ESDA 2006; 211-219doi:https://doi.org/10.1115/ESDA2006-95702

Abstract

View Article

PDF

Topics: Exergy analysis , Power stations , Solid oxide fuel cells , Flow (Dynamics) , Stress , Compressors , Fuels , Heat exchangers , Air compressors , Gas turbines

Numerical Simulations of Reactive Mixture Flow in the Anode Layer of Solid Oxide Fuel Cells by the Lattice Boltzmann Method

Pietro Asinari, Michele Cali` Quaglia, Michael R. von Spakovsky, Bhavani V. Kasula

ESDA 2006; 221-235doi:https://doi.org/10.1115/ESDA2006-95738

Abstract

View Article

PDF

Topics: Anodes , Computer simulation , Flow (Dynamics) , Lattice Boltzmann methods , Solid oxide fuel cells , Electrodes , Electrolytes , Particulate matter , Cermets , Collisions (Physics)

Ash Fouling Under Co-Firing in a Pulverized Fuel Combustion Rig

Luis I. Di´ez, Cristo´bal Corte´s, Mariano Berdusa´n, Eduardo Ferrer

ESDA 2006; 237-244doi:https://doi.org/10.1115/ESDA2006-95748

Abstract

View Article

PDF

Topics: Co-firing , Combustion , Fuels , Biomass , Coal , Heat transfer , Boilers , Corrosion , Probes , Carbon dioxide

HENEA-3: A Second Law Based Expert Assistant for the Synthesis of Heat Exchanger Networks

S. Mastromanno, J. Petrucci, E. Sciubba

ESDA 2006; 245-254doi:https://doi.org/10.1115/ESDA2006-95765

Abstract

View Article

PDF

Topics: Design , Energy recovery , Engineers , Entropy , Expert systems , Heat , Heat exchangers , Optimization , Pinch effect , Process design

Dynamic Simulation of the Anodic Side of an Integrated Solid Oxide Fuel Cell System

A. Traverso, F. Trasino, L. Magistri

ESDA 2006; 255-263doi:https://doi.org/10.1115/ESDA2006-95770

Abstract

View Article

PDF

Topics: Simulation , Solid oxide fuel cells , Dynamic models , Steady state , Transients (Dynamics) , Anodes , Control equipment , Design , Ejectors , Flow (Dynamics)

Fuzzy Statistics Approach for Aviation GTE Condition Estimation Technique

P. S. Abdullayev

ESDA 2006; 265-273doi:https://doi.org/10.1115/ESDA2006-95791

Abstract

View Article

PDF

Topics: Aviation , Statistics as topic , Engines , Dynamics (Mechanics) , Algorithms , Artificial neural networks , Computer technology , Condition monitoring , Flight , Fuzzy logic

Experimental Activity on the Tubular SOFC CHP100 kW_e Field Unit in Italy: Factor Significance, Effects and Regression Model Analysis

M. Cali`, G. Orsello, M. Santarelli, P. Leone

ESDA 2006; 275-284doi:https://doi.org/10.1115/ESDA2006-95802

Abstract

View Article

PDF

Topics: Combined heat and power , Generators , Regression models , Solid oxide fuel cells

Energy Management Techniques for Small and Medium-Sized Companies

Elena Giacone, Salvatore Manco`, Pietro Gabriele

ESDA 2006; 285-291doi:https://doi.org/10.1115/ESDA2006-95808

Abstract

View Article

PDF

Topics: Energy management , Dimensions , Energy consumption , Fuels , Statistical process control

A Numerical Model for Solid Oxide Fuel Cells

N. Massarotti, F. Arpino, A. Carotenuto, P. Nithiarasu

ESDA 2006; 293-300doi:https://doi.org/10.1115/ESDA2006-95816

Abstract

View Article

PDF

Topics: Computer simulation , Solid oxide fuel cells , Energy conversion , Fuel cells , Algorithms , Catalysts , Distributed power generation , Electrodes , Electrolytes , Emissions

Two Phase Pressure Drops for Refrigerants: A Statistical Comparison Among Experimental Data and Correlations

Adriana Greco, Rita Mastrullo, Alfonso W. Mauro, Giuseppe P. Vanoli

ESDA 2006; 301-308doi:https://doi.org/10.1115/ESDA2006-95817

Abstract

View Article

PDF

Topics: Pressure drop , Refrigerants , Databases , Evaporation , Two-phase flow

On the History of ESDA: 1992 to Present

A. O¨zer Arnas

ESDA 2006; 309-312doi:https://doi.org/10.1115/ESDA2006-95822

Abstract

View Article

PDF

Topics: Engineers , International Petroleum Technology Institute , Leadership , Mechanical engineers , Petroleum

Advanced Materials

Thermoelastic Stability of Imperfect Functionally Graded Plates Based on the Third Order Shear Deformation Theory

B. Samsam Shariat, M. R. Eslami, A. Bagri

ESDA 2006; 313-319doi:https://doi.org/10.1115/ESDA2006-95018

Abstract

View Article

PDF

Topics: Plates (structures) , Shear deformation , Stability , Thermoelasticity , Buckling , Equilibrium (Physics) , Mechanical properties , Plate theory , Stress , Temperature

Assessment of a Design Method for Composite Over-Wrapped Pressure Vessels for Hydrogen Storage

Eugenio G. M. Brusa, Matteo Nobile

ESDA 2006; 321-333doi:https://doi.org/10.1115/ESDA2006-95074

Abstract

View Article

PDF

Topics: Composite materials , Design methodology , Hydrogen storage , Pressure vessels , Laminates , Pressure , Carbon , Computer simulation , Cycles , Design

Stress Analysis of Bearing Metal and Research of Testing Method for Fatigue Strength

A. M. Yu, C. T. Wang

ESDA 2006; 335-340doi:https://doi.org/10.1115/ESDA2006-95080

Abstract

View Article

PDF

Topics: Babbitt metal , Fatigue strength , Stress analysis (Engineering) , Testing , Stress , Deformation , Fatigue testing , Finite element methods , Finite element model , Machinery

Low-Temperature and High-Temperature Thermochemical Hardening Technologies for Hard Alloys

Alexander A. Shmatov

ESDA 2006; 341-346doi:https://doi.org/10.1115/ESDA2006-95092

Abstract

View Article

PDF

Topics: Alloys , Hardening , High temperature , Low temperature , Coatings , Cutting tools , Heat treating (Metalworking) , Service life (Equipment) , Surface hardening , Temperature

Strengthening Thermo-Cycling Heat Treatment Process of High-Speed Steels

Alexander A. Shmatov

ESDA 2006; 347-352doi:https://doi.org/10.1115/ESDA2006-95093

Abstract

View Article

PDF

Topics: Heat treating (Metalworking) , Steel , Bending strength , Heat , Impact strength , Wear resistance

On the Thermal Behavior of an Aluminum Reduction Cell During Electrical Preheating

Pedro J. Hernandez, Juan E. Salazar, Rafael Tosta

ESDA 2006; 353-359doi:https://doi.org/10.1115/ESDA2006-95094

Abstract

View Article

PDF

Topics: Aluminum , Finite element analysis , Temperature , Coke , Finite element methods , Finite element model , Anodes , Electrical resistivity , Engineering simulation , Heat transfer coefficients

Some Peculiarities in Behavior of Electrosensitive Fluids Under Electric Field

Evguenia V. Korobko, Valery A. Mansurov, Elena B. Kaberdina, Vyacheslav A. Bilyk

ESDA 2006; 361-366doi:https://doi.org/10.1115/ESDA2006-95152

Abstract

View Article

PDF

Topics: Electric fields , Fluids , Deformation , Stress , Disks , Electrorheological fluids , Rheology

Electrostructured Lubricants for Friction Devices

Vladimir L. Basinuk, Elena B. Kaberdina, Elena I. Mardosevich, Marina I. Sushko, Aliaksandra O. Karabko

ESDA 2006; 367-372doi:https://doi.org/10.1115/ESDA2006-95153

Abstract

View Article

PDF

Topics: Friction , Lubricants , Bearings , Cycles , Electric fields , Machinery , Viscosity

Phase Interaction in Hydroxylapatite/LaPO₄ Composite

Celaletdin Ergun, John W. Halloran, Chang-Jun Bae, Filiz C¸ınar S¸ahin

ESDA 2006; 373-376doi:https://doi.org/10.1115/ESDA2006-95205

Abstract

View Article

PDF

Topics: Composite materials , Lanthanum

Phase Interaction in Hydroxylapatite/CaTiO₃ Composite

Celaletdin Ergun, John W. Halloran, Chang-Jun Bae

ESDA 2006; 377-380doi:https://doi.org/10.1115/ESDA2006-95206

Abstract

View Article

PDF

Topics: Composite materials , Titanium

Formation of Protective Films of Octadecylamine on the Surface of Construction Materials in the Water-Steam Cycle at Fossil Power Plants

Tamara I. Petrova, Valery I. Kashinsky, Andrei Ye. Verkhovsky, Yevgeny V. Chernyshev, Igor N. Trofimov

ESDA 2006; 381-385doi:https://doi.org/10.1115/ESDA2006-95237

Abstract

View Article

PDF

Topics: Building materials , Cycles , Fossil fuels , Steam , Water , Corrosion , Downtime , Boilers , Combined heat and power , Failure

An Analytical Solution for Nonlinear Cylindrical Bending of Functionally Graded Plates

H. M. Navazi, H. Haddadpour, M. Rasekh

ESDA 2006; 387-396doi:https://doi.org/10.1115/ESDA2006-95252

Abstract

View Article

PDF

Topics: Plates (structures) , Materials properties , Boundary-value problems , Deflection , Differential equations , Equilibrium (Physics) , Plate theory

Analysis of Plastic Helical Gear

Toni Jabbour, Ghazi Asmar, Chadi Ghaith

ESDA 2006; 397-404doi:https://doi.org/10.1115/ESDA2006-95283

Abstract

View Article

PDF

Topics: Helical gears , Deformation , Elastic moduli , Gears , Stress , Wear

Compact Basis Free Relations for Stress Tensors Conjugate to Hill’s Strain Measures

Reza Naghdabadi, Mohsen Asghari, Kamyar Ghavam

ESDA 2006; 405-409doi:https://doi.org/10.1115/ESDA2006-95367

Abstract

View Article

PDF

Topics: Continuum mechanics , Stress , Stress tensors , Tensors , Constitutive equations , Eigenvalues , Modeling

Experimental and Numerical Study for Determining the Mechanical Properties of Automobile Weatherstrip Seals

Emre Dikmen, Ipek Basdogan

ESDA 2006; 411-417doi:https://doi.org/10.1115/ESDA2006-95402

Abstract

View Article

PDF

Topics: Automobiles , Mechanical properties , Compression , Stress , Deflection , Modeling , Finite element analysis , Finite element methods , Finite element model , Rubber

Analytical Solution and Experimental Verification of Shaped Charge Jet Penetration

Serkan Gozubuyuk, R. Orhan Yildirim

ESDA 2006; 419-425doi:https://doi.org/10.1115/ESDA2006-95508

Abstract

View Article

PDF

Topics: Collapse , Copper , Modeling , Plates (structures) , Shapes , Steel

Characterization of Material Properties Using Strain Mapping and Reverse Engineering

Lianshan Lin, Haiyan Li, Alex S. L. Fok

ESDA 2006; 427-433doi:https://doi.org/10.1115/ESDA2006-95616

Abstract

View Article

PDF

Topics: Finite element analysis , Materials properties , Reverse engineering , Stress , Anisotropy , Elastic constants , Failure , Graphite , Inverse problems , Mechanical testing

Generalized Coupled Thermoelasticity of Functionally Graded Layers

A. Bagri, M. R. Eslami, B. A. Samsam-Shariat

ESDA 2006; 435-440doi:https://doi.org/10.1115/ESDA2006-95661

Abstract

View Article

PDF

Topics: Displacement , Elastic waves , Finite element methods , Laplace transforms , Materials properties , Relaxation (Physics) , Stress , Temperature , Thermal shock , Thermoelasticity

Axisymmetric Solutions of Functionally Graded Circular and Annular Plates Using Second-Order Shear Deformation Plate Theory

Ali Reza Saidi, Shahab Sahraee

ESDA 2006; 441-450doi:https://doi.org/10.1115/ESDA2006-95699

Abstract

View Article

PDF

Topics: Plate theory , Plates (structures) , Shear deformation

Synthesis and Characterization of Mesoporous and Microporous Carbons With Potential Applications as Hydrogen Storage Media

Marco Armandi, Barbara Bonelli, Edoardo Garrone

ESDA 2006; 451-456doi:https://doi.org/10.1115/ESDA2006-95740

Abstract

View Article

PDF

Topics: Hydrogen storage , Carbon , Spectra (Spectroscopy) , Casting , Graphene , Low temperature , Metals , Porosity , Weight (Mass)

Tribological Characteristics of Carbon/Epoxy Composites With Respect to Surface Groove Dimensions

Hak Gu Lee, Seong Su Kim, Dai Gil Lee

ESDA 2006; 457-462doi:https://doi.org/10.1115/ESDA2006-95760

Abstract

View Article

PDF

Topics: Carbon , Composite materials , Dimensions , Epoxy adhesives , Epoxy resins , Tribology , Bearings , Wear , Friction , Shear stress

Higher Order Global-Local Theory Coupled Bending and Extension for Laminated Composite Plates and Refined Element Methods

Wanji Chen, Zhen Wu

ESDA 2006; 463-473doi:https://doi.org/10.1115/ESDA2006-95762

Abstract

View Article

PDF

Topics: Composite materials , Plates (structures) , Stress , Polynomials , Shear stress , Deflection , Displacement , Equilibrium (Physics) , Laminates

Aerospace

Elastoplastic Stress Study in Thick-Walled Spherical Vessels Considering Finite Deformation

Hossein Darijani, Reza Naghdabadi, Nima Shamsaei, Mehdi Danesh Sararoudi

ESDA 2006; 475-482doi:https://doi.org/10.1115/ESDA2006-95065

Abstract

View Article

PDF

Topics: Deformation , Stress , Vessels , Boundary-value problems , Hardening , Stress concentration

The Thermodynamic Performance of Ideal Single-Tube Air-Breathing Pulse Detonation Engine

Hua Qiu, Cha Xiong, Chuan-Jun Yan

ESDA 2006; 483-492doi:https://doi.org/10.1115/ESDA2006-95099

Abstract

View Article

PDF

Topics: Engines , Explosions , Fuels , Cycles , Ramjets , Combustion , Ducts , Nozzles , Air flow , Flow (Dynamics)

A Hybrid Optimization Method Research for Aeroengine Performance Seeking Control

Yu-Bin Zhu, Si-Qi Fan, Xiu-Hua Zhang, Hua-Cong Li

ESDA 2006; 493-497doi:https://doi.org/10.1115/ESDA2006-95234

Abstract

View Article

PDF

Topics: Optimization , Linear programming , Algorithms , Computation , Computer simulation , Engines , Fuels , Simulation results , Thrust

Supersonic Flutter of Functionally Graded Plates in a Thermal Environment

H. M. Navazi, H. Haddadpour

ESDA 2006; 499-506doi:https://doi.org/10.1115/ESDA2006-95253

Abstract

View Article

PDF

Topics: Flutter (Aerodynamics) , Plates (structures) , Aerodynamics , Ceramics , Differential equations , Finite element methods , Functionally graded materials , Hamilton's principle , Materials properties , Metals

Validation of a Navier-Stokes Solver for CFD Computations of Transonic Compressors

Roberto Biollo, Ernesto Benini

ESDA 2006; 507-514doi:https://doi.org/10.1115/ESDA2006-95318

Abstract

View Article

PDF

Topics: Compressors , Computation , Computational fluid dynamics , Flow (Dynamics) , Computer simulation , Design , Shock (Mechanics) , Boundary layers , Clearances (Engineering) , Compression

Redesign of a Centrifugal Compressor’s Vaned Diffuser to Improve Core Engine Performances

Victor I. Mileshin, Andrew N. Startsev, Igor A. Brailko, Igor K. Orekhov

ESDA 2006; 515-522doi:https://doi.org/10.1115/ESDA2006-95364

Abstract

View Article

PDF

Topics: Diffusers , Engines , Temperature , Turbines , Flow (Dynamics) , Pressure , Compressors , Exhaust systems , Optimization , Brayton cycle

Experimental Study of Thermal Cavitation in an Orifice

Maria Grazia De Giorgi, Fabio Chiara, Antonio Ficarella

ESDA 2006; 523-529doi:https://doi.org/10.1115/ESDA2006-95406

Abstract

View Article

PDF

Topics: Cavitation , Flow (Dynamics) , Pressure , Temperature , Bubbles , Computer simulation , Fluctuations (Physics) , Fourier transforms , Signals , Simulation results

Structural Optimization of Elastic Articulation Rotor System for Dynamic Stability

Jieun Ku, Daniel P. Schrage

ESDA 2006; 531-540doi:https://doi.org/10.1115/ESDA2006-95416

Abstract

View Article

PDF

Topics: Dynamic stability , Rotors , Structural optimization , Hinges , Optimization , Beams (Structural) , Bending (Stress) , Computation , Dampers , Matlab

Universiti Tenaga Nasional Short Duration Hypersonic Test Facility: Calibration and Verification

Amir Al-Falahi, T. Yusaf, M. Z. Yusoff

ESDA 2006; 541-549doi:https://doi.org/10.1115/ESDA2006-95448

Abstract

View Article

PDF

Topics: Calibration , Mach number , Shock tubes , Test facilities , Pressure , Diaphragms (Mechanical devices) , Diaphragms (Structural) , Temperature , Tunnels , Fluids

Fluid Dynamic Design Optimization of the Intake of a Small Turbojet

Riccardo Amirante, Luciano A. Catalano, Andrea Dadone, Vito S. E. Daloiso, Dario Manodoro

ESDA 2006; 551-560doi:https://doi.org/10.1115/ESDA2006-95464

Abstract

View Article

PDF

Topics: Design , Fluids , Optimization , Turbojets , Flow (Dynamics) , Electric power generation , Flight , Microturbines , Simulation , Stress

On the Use of Commercial CFD Software in the Study of Unsteady Aerodynamic Flows Around Oscillating Airfoils

Bamidele A. Sangolola, Stephen P. Lakey

ESDA 2006; 561-571doi:https://doi.org/10.1115/ESDA2006-95498

Abstract

View Article

PDF

Topics: Aerodynamic flow , Airfoils , Computational fluid dynamics , Computer software , Flow (Dynamics) , Mach number , Simulation , Computer simulation

Freeform Deformation vs. B-Spline Representation in Inverse Airfoil Design

Eleftherios I. Amoiralis, Ioannis K. Nikolos

ESDA 2006; 573-582doi:https://doi.org/10.1115/ESDA2006-95557

Abstract

View Article

PDF

Topics: Airfoils , B-splines , Deformation , Design , Algorithms , Approximation , Flow (Dynamics) , Optimization algorithms , Pressure

A Cost and Time Effective Alternative for an Aerial Reconnaissance and Surveillance Platform

Zenovy S. Wowczuk, Jeffery R. X. Auld, James E. Smith

ESDA 2006; 583-590doi:https://doi.org/10.1115/ESDA2006-95600

Abstract

View Article

PDF

Topics: Aerial lift platforms , Aircraft , Design , Drugs , Homeland security , Industrial research , Military systems , Patents , Sensors , Stability

High Lift Circulation Controlled Helicopter Blade

Gerald M. Angle, II, Wade W. Huebsch, Zenovy S. Wowczuk, Jacky C. Prucz, James E. Smith

ESDA 2006; 591-595doi:https://doi.org/10.1115/ESDA2006-95602

Abstract

View Article

PDF

Topics: Blades , Rotors , Airfoils , Aircraft , Control systems , Drag (Fluid dynamics) , Testing , Wind tunnels , Wings , Aviation

Optimal Design of Supercavitating Vehicles Based on Trimmed Flight Performance

Seong Sik Ahn, Massimo Ruzzene

ESDA 2006; 597-606doi:https://doi.org/10.1115/ESDA2006-95611

Abstract

View Article

PDF

Topics: Design , Flight , Vehicles , Cavities , Hydrodynamic stability , Stress , Center of mass , Degrees of freedom , Disks , Drag (Fluid dynamics)

Prediction of the Dynamic Behaviour of Electromagnetic Relays Submitted to Mechanical Shocks

D. Wattiaux, C. Conti, O. Verlinden

ESDA 2006; 607-615doi:https://doi.org/10.1115/ESDA2006-95652

Abstract

View Article

PDF

Topics: Shock (Mechanics) , Pyrotechnics , Damage , Electronic equipment , Failure , Shock waves , Chatter , Firing , Mechanical behavior , Modal analysis

Automation and Robotics

Development of Miniature Gripper Using Buckling Phenomenon of Long Column

N. Muramatsu

ESDA 2006; 617-622doi:https://doi.org/10.1115/ESDA2006-95003

Abstract

View Article

PDF

Topics: Buckling , Grippers , Displacement , Steel , Blanks , Elastic plates , Engineering prototypes , Engines , Machinery , Manufacturing

Design of a Fuzzy Controller for an Underwater Vehicle Aiming at a Stationary Target

Farhood Azarsina, Hassan Sayyaadi

ESDA 2006; 623-629doi:https://doi.org/10.1115/ESDA2006-95033

Abstract

View Article

PDF

Topics: Control equipment , Design , Underwater vehicles , Algorithms , Dynamics (Mechanics) , Engineering simulation , Errors , Fuzzy logic , Modeling , Navigation

New Generation of Multi Connected Systems of Flexible Automation and the Ways of Strategic Control of Them

Vladimir Dmitrievich Darovskih

ESDA 2006; 631-640doi:https://doi.org/10.1115/ESDA2006-95064

Abstract

View Article

PDF

Topics: Control systems , Design , Machinery , Robots

6-DOF Single-Inertial Mass, Isotropic Accelerometer With Optical Displacement Sensors

Vladimir Chapsky, Vladimir Portman, Ben-Zion Sandler

ESDA 2006; 641-650doi:https://doi.org/10.1115/ESDA2006-95121

Abstract

View Article

PDF

Topics: Accelerometers , Design , Displacement , Isotropy , Sensors

A Genetic Algorithm as Support in the Movement Optimisation of a Redundant Serial Robot

Massimo Antonini, Alberto Borboni, Roberto Bussola, Rodolfo Faglia

ESDA 2006; 651-658doi:https://doi.org/10.1115/ESDA2006-95123

Abstract

View Article

PDF

Topics: Genetic algorithms , Optimization , Robots , Cutting , Lasers , End effectors , Kinematics , Machinery , Pipes , Trajectories (Physics)

A Design and Simulation of CALUMA (CAssino Low-Cost hUMAnoid Robot)

Nestor Eduardo Nava Rodriguez, Giuseppe Carbone, Marco Ceccarelli

ESDA 2006; 659-664doi:https://doi.org/10.1115/ESDA2006-95196

Abstract

View Article

PDF

Topics: Design , Humanoid robots , Simulation , Robotics , Computer programming , Computer software , Engineering prototypes , Kinematics , Three-dimensional computer-aided design

Camera Based Concept for Enhancement of IRB Accuracy Using Fixed Features and SLAM

Lars A. A. Andersson, Marcus Berglund

ESDA 2006; 665-672doi:https://doi.org/10.1115/ESDA2006-95312

Abstract

View Article

PDF

Topics: Dynamics (Mechanics) , Feedback , Filters , Image processing , Manufacturing , Optical mirrors , Robots , Sensors , Signal to noise ratio

Wire-Driven Pneumatic Actuation of a New 6-DOF Haptic Master

Carlo Ferraresi, Massimiliana Carello, Francesco Pescarmona, Roberto Grassi

ESDA 2006; 673-679doi:https://doi.org/10.1115/ESDA2006-95325

Abstract

View Article

PDF

Topics: Haptics , Wire , Robots , Actuators , Degrees of freedom , Displacement , Force feedback , Virtual reality

Design of Planetary Exploration Vehicles

Giancarlo Genta

ESDA 2006; 681-690doi:https://doi.org/10.1115/ESDA2006-95338

Abstract

View Article

PDF

Topics: Design , Vehicles , Robotics , Instrumentation , Mechanical admittance

A New Mechanism for Wall Climbing Operation Based on 4-Bar Linkage

Mohammad Sharif Shourijeh, Hassan Sayyaadi

ESDA 2006; 691-694doi:https://doi.org/10.1115/ESDA2006-95358

Abstract

View Article

PDF

Topics: Linkages , Robots , Cycles , Degrees of freedom , Design , Fire , Inspection , Painting , Structures

Kinematical and Dynamic Analysis of Biped Robots’ Locomotion Using Dynamic Object Manipulation Approach

Borhan Beigzadeh, Majid Nili Ahmadabadi, Ali Meghdari

ESDA 2006; 695-704doi:https://doi.org/10.1115/ESDA2006-95362

Abstract

View Article

PDF

Topics: Dynamic analysis , Robots , Manipulators , Boundary-value problems , Dimensions , Path planning , Simulation results

Mobile Robots for Airports Surveillance: A Modular Solution

Gabriella M. Acaccia, Luca E. Bruzzone, Roberto P. Razzoli

ESDA 2006; 705-711doi:https://doi.org/10.1115/ESDA2006-95392

Abstract

View Article

PDF

Topics: Mobile robots , Surveillance , Traction , Automobiles , Containers , Maintenance , Mechanical admittance , Robotics , Steering wheels , Vehicles

Localization of a Mobile Robot With Omnidirectional Wheels Using Angular Kalman Filtering and Triangulation

Josep M. Font, Joaquim A. Batlle

ESDA 2006; 713-720doi:https://doi.org/10.1115/ESDA2006-95412

Abstract

View Article

PDF

Topics: Filtration , Mobile robots , Wheels , Robots , Lasers , Computer simulation , Dynamic positioning systems , Kalman filters , Navigation , Robot kinematics

A Novel Method on Singularity Analysis in Parallel Manipulators

Hodjat Pendar, Maryam Mahnama, Hassan Zohoor

ESDA 2006; 721-730doi:https://doi.org/10.1115/ESDA2006-95447

Abstract

View Article

PDF

Topics: Manipulators , Parallel mechanisms , Computation , Kinematic chains , Theorems (Mathematics)

Remote Controlled Underground Robot for Landfill Drainage

Vittorio Belotti, Rinaldo C. Michelini, Matteo Zoppi

ESDA 2006; 731-738doi:https://doi.org/10.1115/ESDA2006-95465

Abstract

View Article

PDF

Topics: Drainage , Robots , Sanitary landfills , Drilling , Pollution , Project tasks , Robotics , Rods , Tunnels , Contamination

A Master-Slave Robotic System for Haptic Teleoperation

R. Caracciolo, G. Boschetti, N. De Rossi, G. Rosati, A. Trevisani

ESDA 2006; 739-748doi:https://doi.org/10.1115/ESDA2006-95474

Abstract

View Article

PDF

Topics: Haptics , Robotics , Robots , Delays , Drilling , Force feedback , Algorithms , Drills (Tools) , End effectors , Humanoid robots

Robotised Cell for the Incremental Forming of Metal Sheets

Massimo Callegari, Andrea Gabrielli, Matteo-Claudio Palpacelli, Marco Principi

ESDA 2006; 749-756doi:https://doi.org/10.1115/ESDA2006-95496

Abstract

View Article

PDF

Topics: Sheet metal , Robots , Blanks , Computer software , Deformation , Design , Engineering prototypes , Flanges , Forging , Machining

Test-Bed Infrastructure for Industrial Control Systems Validation

Emanuelle Carpanzano, Andrea Cataldo

ESDA 2006; 757-763doi:https://doi.org/10.1115/ESDA2006-95538

Abstract

View Article

PDF

Topics: Computer software , Control algorithms , Control characters , Control systems , Design , Hardware , Industrial controls , Industrial plants , Lumber , Manufacturing

Experimental Analysis of a Soft Compliant Tactile Microsensor to be Integrated in an Anthropomorphic Artificial Hand

L. Beccai, S. Roccella, Luca Ascari, P. Valdastri, Arne Sieber, M. C. Carrozza, P. Dario

ESDA 2006; 765-774doi:https://doi.org/10.1115/ESDA2006-95543

Abstract

View Article

PDF

Topics: Experimental analysis , Microsensors , Shear (Mechanics) , Transients (Dynamics) , Biomimetics , Design , Encryption , Grasping , Packaging , Sensors

Thermic Influence on the Dynamics of Pneumatic Servosystems

Massimo Sorli, Laura Gastaldi

ESDA 2006; 775-782doi:https://doi.org/10.1115/ESDA2006-95545

Abstract

View Article

PDF

Topics: Dynamics (Mechanics) , Servomechanisms , Stiffness , Actuators , Compressibility , Control equipment , Damping , Fluids , Heat , Modeling

On the Design of Three Links Robot for Drawing Epicycloid and Hypocycloid Curves

Meng-Hui Hsu, Zong-You Tsai, Long-Chang Hsieh, Jen-Yu Liu

ESDA 2006; 783-789doi:https://doi.org/10.1115/ESDA2006-95546

Abstract

View Article

PDF

Topics: Design , Robots , Degrees of freedom , Planetary gears , Trains , Computers , Design methodology , Engineering prototypes , Equations of motion , Linkages

Analysis of Singularities of a 3DOF Parallel Manipulator Based on a Novel Geometrical Method

Hodjat Pendar, Hajir Roozbehani, Hoda Sadeghian, Hassan Zohoor

ESDA 2006; 791-797doi:https://doi.org/10.1115/ESDA2006-95592

Abstract

View Article

PDF

Topics: Manipulators , Theorems (Mathematics) , Geometry , Individual Certification Programs , Jacobian matrices , Parallel mechanisms

Noise Control and Acoustics

Sound Absorption Prediction Using Finite Element Model Based on Modified Biot Poroelastic Model

A. R. Ohadi, M. Moghaddami

ESDA 2006; 799-806doi:https://doi.org/10.1115/ESDA2006-95126

Abstract

View Article

PDF

Topics: Absorption , Acoustics , Boundary-value problems , Finite element analysis , Finite element model , Fluids , Porous materials , Simulation , Sound absorption

Experimental Determination of Special Frequencies With Constant SL (Sound’s Level) in Noise of a Centrifugal Pump That Lead or Lag Due to the Speed Fluctuation

M. S. Hashemian Natanzi, H. Rahimzadeh, S. F. Chini

ESDA 2006; 807-812doi:https://doi.org/10.1115/ESDA2006-95220

Abstract

View Article

PDF

Topics: Centrifugal pumps , Noise (Sound) , Pumps

Vibration Control and Identification Analysis of Generally Cracked and Spring Added “L” Shaped Beams

Vedat Karadag

ESDA 2006; 813-822doi:https://doi.org/10.1115/ESDA2006-95511

Abstract

View Article

PDF

Topics: Springs , Vibration control , Fracture (Materials) , Noise (Sound) , Finite element methods , Free vibrations , Shapes , Vibration

Modal Methodology for the Simulation and Optimisation of the Free-Layer Damping Treatment of a Car Body

Marco Danti, Davide Vige`, Guido Vincent Nierop

ESDA 2006; 823-832doi:https://doi.org/10.1115/ESDA2006-95653

Abstract

View Article

PDF

Topics: Damping , Optimization , Simulation , Design , Weight (Mass) , Algorithms , Acoustics , Aluminum , Automotive industry , Computation

Computational Aeroacoustic of Buffeting Phenomena Coming From an Open Sunroof

Enrico Ribaldone, Mauro Casella, Giuseppe Scantamburlo, Roberto Tregnago

ESDA 2006; 833-838doi:https://doi.org/10.1115/ESDA2006-95681

Abstract

View Article

PDF

Topics: Acoustics , Aerodynamic noise , Aircraft , Automobiles , Cavities , Computation , Equilibrium (Physics) , Flow (Dynamics) , Fluctuations (Physics) , Fluids

Systems Engineering

Using Case-Based Reasoning and Soft Computing Techniques for the Initialization of Engineering Design Optimization

K. M. Saridakis, A. J. Dentsoras

ESDA 2006; 839-848doi:https://doi.org/10.1115/ESDA2006-95078

Abstract

View Article

PDF

Topics: Artificial neural networks , Design , Engineering design , Genetic algorithms , Optimization , Preferences , Conveyor systems , Parametric design

An Innovative Channel Design of the Freezing Chucker

Rong-Yuan Jou

ESDA 2006; 849-854doi:https://doi.org/10.1115/ESDA2006-95101

Abstract

View Article

PDF

Topics: Design , Freezing , Conceptual design , Temperature , Clamps (Tools) , Computer simulation , Coolants , Engineering design processes , Finite element analysis , Flow (Dynamics)

The Effect of Cavitation on the Vibration Behaviour of Nonlinear Rotor Bearing Systems

Duc Pham, Ningsheng Feng, Eric Hahn

ESDA 2006; 855-860doi:https://doi.org/10.1115/ESDA2006-95131

Abstract

View Article

PDF

Topics: Bearings , Cavitation , Rotors , Stability , Vibration

Analysis of the Sensitivity to Vibrations of an Optical Torquemeter

Marco Bonfanti, Fabio Lo Savio

ESDA 2006; 861-867doi:https://doi.org/10.1115/ESDA2006-95191

Abstract

View Article

PDF

Topics: Torquemeters , Vibration , Lasers , Signals , Torque measurement

The Subjective Aspects of Design Structure Matrices: Analysis of Comprehension and Application and Means to Overcome Differences

Maik Maurer, Udo Pulm, Felix Ballestrem, John Clarkson, Udo Lindemann

ESDA 2006; 869-878doi:https://doi.org/10.1115/ESDA2006-95200

Abstract

View Article

PDF

Topics: Design , Engineering design processes , Linkages , Systems theory

Extending Lagrange Interpolation to Develop a 4-Node Quadrilateral Element

A. S. Pradeep Kumar, Shrinivasa Udipi

ESDA 2006; 879-887doi:https://doi.org/10.1115/ESDA2006-95260

Abstract

View Article

PDF

Topics: Interpolation , Shapes , Stress , Finite element analysis , Bubbles , Design , Finite element methods , Stiffness

Extending Design Structure Matrices and Domain Mapping Matrices by Multiple Design Structure Matrices

Markus Eichinger, Maik Maurer, Udo Pulm, Udo Lindemann

ESDA 2006; 889-898doi:https://doi.org/10.1115/ESDA2006-95266

Abstract

View Article

PDF

Topics: Design

The Cruise and Active Suspension Control for High Speed Train

Chih-Jer Lin, Wan-Quan Xu

ESDA 2006; 899-907doi:https://doi.org/10.1115/ESDA2006-95360

Abstract

View Article

PDF

Topics: Trains , Safety , Fault tolerance , Optimization , Sliding mode control , Suspension systems , Transportation systems

Estimation of the Comfort Indexes of a Rail Vehicle at Design Stage

Roberto Corradi, Stefano Melzi, Francesco Ripamonti, Mario Romani

ESDA 2006; 909-915doi:https://doi.org/10.1115/ESDA2006-95365

Abstract

View Article

PDF

Topics: Design , Rail vehicles , Engineering simulation , Numerical analysis , Simulation , Trains , Vehicles

Function-Driven Product Design in Virtual Teams Through Methodical Structuring of Requirements and Components

Matthias Kreimeyer, Ulrich Herfeld, Frank Deubzer, Cyrille Dequidt, Udo Lindemann

ESDA 2006; 917-925doi:https://doi.org/10.1115/ESDA2006-95380

Abstract

View Article

PDF

Topics: Product design , Teams , Design , Engineers , Simulation , Collaboration , Geometry , Topology , Transparency

Torsional Analysis of a 20-Cylinder Hypercompressor Train

Enzo Giacomelli, Carlo Mazzali, Nicola Campo, Paolo Battagli, Fabio Falciani

ESDA 2006; 927-937doi:https://doi.org/10.1115/ESDA2006-95503

Abstract

View Article

PDF

Topics: Cylinders , Trains , Compressors , Engines , Machinery , Motors , Compression , Design , Electric motors , Low density polyethylene

Forced Responce of Cylinder Manifold for Reciprocating Compressor Applications

Enzo Giacomelli, Marco Passeri, Matteo Romiti, Stefano Generosi

ESDA 2006; 939-948doi:https://doi.org/10.1115/ESDA2006-95504

Abstract

View Article

PDF

Topics: Compressors , Cylinders , Manifolds , Acoustics , Vibration , Design , Simulation , Stress , Damping , Engineering drawings

Simulation of Cylinder Valves for Reciprocating Compressors

Enzo Giacomelli, Fabio Falciani, Guido Volterrani, Riccardo Fani, Leonardo Galli

ESDA 2006; 949-958doi:https://doi.org/10.1115/ESDA2006-95505

Abstract

View Article

PDF

Topics: Compressors , Cylinders , Simulation , Valves , Compression , Computational fluid dynamics , Cycles , Displacement , Energy consumption , Machinery