..., the Reynolds number was maintained between 100 and 900 for different runs. The simulation and analysis results show that microchannels can be used in building envelop to provide dynamic thermal resistance and increase the energy efficiency in different buildings. The results also show that flow of a water...

... Abstract The residential sector in Saudi Arabia consumes more than half of the total electricity generated, with room air conditioners being among the most significant contributors. The current work aims to estimate the current and future energy savings and CO 2 emission reductions possible...

... charging stations have no provision for chargers, hence the development of a mobile charging station equipped with all classes of chargers. In this study, an investigation of the energy and exergy performance of the locally developed 6W charging station, designed to improve charging convenience...

... Abstract Solar water heating systems utilize different types of collectors in heating water. Therefore, a study on energy and exergy analysis of a compound parabolic collector in a pumped solar water heating system is presented. The compound parabolic collector was designed using basic sizing...

... Abstract Buildings are complex systems with dynamic loading and ever-changing usage. Additionally, there is a need to reduce unnecessary energy consumption while increasing occupant health in buildings via implementation of manual fault detection with available building design programs. However...

... Abstract In the ferronickel production process, mineral calcination is one of the most energy-intensive stages. In a typical rotary kiln calciner, particulate solids and combustions gases move counter currently, while solids undergo drying, pre-reduction, and partial reduction reactions...

... the operation of the PHR-based CSP plant at elevated temperatures (∼1000°C). This advantage leads to higher efficiency and lower levelized cost of energy (LCOE) produced by PHR-based CSP plants. However, designing and integrating the commercial solar power plant at high operating temperatures (∼1000°C...

.... They produced a higher heat load than that of the series flow in a cross double U-tube (SFCD) arrangement by (30–31) %, (27–30) %, and (29–31) % for the (PFPD), (PFCD) and (SFPD) configurations respectively. heat exchangers energy alternative energy sources geothermal energy modeling Proceedings...

... (30.5 °C) to 2.2 bar (36.2 °C) the system output is dropped by 56.4 %. ejector low grade heat CCP vapour compression VCC refrigeration efficiency energy * Contact author: fahid.riaz@u.nus.edu Energy analysis of a new combined cooling and power system for low-temperature heat utilization...

...COMPARISON AND IMPLEMENTATION OF THERMALLY MASSIVE WALL AND ROOF MODELS FOR USE IN SIMPLIFIED BUILDING ENERGY MODELS Christopher Fernandez and Sheldon Jeter Georgia Institute of Technology Atlanta, GA, USA ABSTRACT An increasing trend in building energy simulations is to use simplified models...

... the energy production capacity and the efficiency of the wind farm. The results illustrate that the many-to-one correlation in such a hybrid approach can provide more reliable prediction of the long term onsite wind variations, compared to one-to-one correlations. Energy neural network power...

... and consequently the pollution. Briquette biomass heat value sulfur emissions energy Copyright © 2012 by ASME BIOBRIQUETTES: AS A SUSTAINABLE COMPOSITE FUEL FOR RURAL AREAS IN DEVELOPING COUNTRIES Adrian Ávila Universidad Pontificia Bolivariana Montería, Córdoba, Colombia Víctor Nova Universidad...

...Proceedings of ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference ESFuelCell2011 August 7-10, 2011, Washington, DC, USA ESFuelCell2011-54507 MULTIVARIATE AND MULTIMODAL WIND DISTRIBUTION MODEL BASED ON KERNEL DENSITY...

... of Mexico, is made. This analysis shows the need for a professional specialized in the development and improvement of efficient equipment for the sustainable use of energy. Throughout this article, professional degrees related with sustainable development in Mexico are reviewed, and the lack of this kind...

...Proceedings of ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference ESFuelCell2011 August 7-10, 2011, Washington, DC, USA ESFuelCell2011-54503 DEVELOPING A FLEXIBLE PLATFORM FOR OPTIMAL ENGINEERING DESIGN OF COMMERCIAL WIND...

... the North Dakota Agricultural Weather Network (NDAWN). The results illustrate the variation of wind conditions and, subsequently, its influence on the quality of a wind resource. Energy farm siting reliability based hybrid functions response surface wind resource potential Proceedings of ASME...

... 10 01 2011 In this paper, energy and exergy analyses of a trigeneration system based on an organic Rankine cycle (ORC) and a biomass combustor are presented. This trigeneration system consists of a biomass combustor to provide heat input to the ORC, an ORC for power production...

... 1 Copyright © 2010 by ASME Proceedings of the 4th International Conference on Energy Sustainability ES2010 May 17-22, 2010, Phoenix, Arizona, USA ES2010 90162 DAILY EXERGY ASSESSMENT OF LIBR-WATER ABSORPTION CHILLER USED FOR SOLAR COOLING Cenk Onan Yildiz Technical University Istanbul, Turkey...

... LEED existing building energy retrofit ISO 14001 cost analysis Proceedings of ES2009 Energy Sustainability 2009 July 19-23, 2009, San Francisco, California USA ES2009-90095 COST EFFECTIVE ENERGY IMPROVEMENTS FOR AN EXISTING COMMERCIAL BUILDING: A CASE STUDY Davion M. Hill Det Norske...

... 05 10 2010 In this paper, energy end-use models of U.S. Organic Chemicals and the U.S. Inorganic Chemicals industries are given. The energy end-use model is developed based on the waste heat recovery characterization of the U.S. Chemical Industry and the onsite power and steam...