A methodology for designing a low-computation, high-bandwidth strategy for closed-loop control of a hysteretic system without a priori knowledge of the desired trajectory is presented. The resulting two degree-of-freedom hysteresis control strategy is applied to a dynamic mirror with antagonistic piezoelectric stack actuation. Hysteresis compensator is performed by a finite state machine switching polynomials for hysteresis inversion based on the input signal slope. Residual error after hysteresis compensation is corrected by an LQR feedback controller. Experimental results demonstrate effectiveness of the hysteresis compensator and closed-loop system under the proposed hysteresis control strategy. For the triangular input signal tested, the closed-loop system achieves a 91.5% reduction in hysteresis uncertainty with 60 kHz sample rate.
- Dynamic Systems and Control Division
Two Degree-of-Freedom Hysteresis Compensation for a Dynamic Mirror With Antagonistic Piezoelectric Stack Actuation
Mynderse, JA, & Chiu, GTC. "Two Degree-of-Freedom Hysteresis Compensation for a Dynamic Mirror With Antagonistic Piezoelectric Stack Actuation." Proceedings of the ASME 2013 Dynamic Systems and Control Conference. Volume 3: Nonlinear Estimation and Control; Optimization and Optimal Control; Piezoelectric Actuation and Nanoscale Control; Robotics and Manipulators; Sensing; System Identification (Estimation for Automotive Applications, Modeling, Therapeutic Control in Bio-Systems); Variable Structure/Sliding-Mode Control; Vehicles and Human Robotics; Vehicle Dynamics and Control; Vehicle Path Planning and Collision Avoidance; Vibrational and Mechanical Systems; Wind Energy Systems and Control. Palo Alto, California, USA. October 21–23, 2013. V003T37A002. ASME. https://doi.org/10.1115/DSCC2013-3869
Download citation file: