Ever increasing acceptance of electric vehicles relies on better operation and control of large battery packs. The individual cells in the large battery packs cannot have identical characteristics and may degrade differently due to its manufacturing variability and other factors. It is beneficial to evaluate the performance gain by replacing certain battery modules/cells during actual driving. We have a two-fold objective for this research. First, we are developing an on-line battery module degradation diagnostic scheme using the intrinsic signals of a battery pack equalization circuit. Therefore, a battery “health map” can be constructed and updated in real time. Secondly, based on the derived battery health map, the performance of the battery pack will be evaluated for customer specified trip so as to evaluate the “worthiness of replacing” certain modules/cells.
Skip Nav Destination
ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control
October 31–November 2, 2011
Arlington, Virginia, USA
Conference Sponsors:
- Dynamic Systems and Control Division
ISBN:
978-0-7918-5475-4
PROCEEDINGS PAPER
Trip Specific Worthiness of Replacement of Individual Cells for Battery Pack in Electric Vehicles
Rohit Ugle,
Rohit Ugle
University of Wisconsin-Milwaukee, Milwaukee, WI
Search for other works by this author on:
Yaoyu Li
Yaoyu Li
University of Wisconsin-Milwaukee, Milwaukee, WI
Search for other works by this author on:
Rohit Ugle
University of Wisconsin-Milwaukee, Milwaukee, WI
Yaoyu Li
University of Wisconsin-Milwaukee, Milwaukee, WI
Paper No:
DSCC2011-5910, pp. 705-711; 7 pages
Published Online:
May 5, 2012
Citation
Ugle, R, & Li, Y. "Trip Specific Worthiness of Replacement of Individual Cells for Battery Pack in Electric Vehicles." Proceedings of the ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control. ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, Volume 1. Arlington, Virginia, USA. October 31–November 2, 2011. pp. 705-711. ASME. https://doi.org/10.1115/DSCC2011-5910
Download citation file:
9
Views
Related Proceedings Papers
Thermal Design of Variable Frequency Drives for Hybrid and Electric Transport Applications
InterPACK2021
Electric Vehicle Battery End-Of-Use Recovery Management: Degradation Prediction and Decision Making
MSEC2022
Related Articles
A Hybrid Convolutional Neural Network-Long Short Term Memory for Discharge Capacity Estimation of Lithium-Ion Batteries
J. Electrochem. En. Conv. Stor (August,2022)
State of Charge Estimation of Lithium-Ion Battery Based on IDRSN and BiGRU
J. Electrochem. En. Conv. Stor (August,2024)
Mechanical Properties of Prismatic Li-Ion Batteries—Electrodes, Cells, and Stacks
J. Electrochem. En. Conv. Stor (November,2022)
Related Chapters
Concluding Remarks and Future Work
Ultrasonic Welding of Lithium-Ion Batteries
Introduction
Ultrasonic Welding of Lithium-Ion Batteries
Characteristics of Suitable Drive Train for Electric Vehicle
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)