This paper reports production of 4.5 μm-diameter monodisperse water droplets using silicon-based one MHz ultrasonic nozzles of a novel design. The novel design of multiple Fourier horns in resonance facilitates pure capillary wave mechanism atomization. The measured drop diameters are in very good agreement with those predicted by the capillary wave atomization mechanism. Due to the resonance effect, the power and voltage requirements for atomization were as low as 15 mW and 6.5 V at atomization rate as high as 300 μl/min. The droplet diameter was reduced to 4.1 μm when the surface tension of the liquid was reduced from 70 dyne/cm (water) to 50 dyne/cm (0.25% Triton X-100 surfactant solution). Such small diameter drops with GSD (geometrical standard deviation) as small as 1.1 was achieved in ultrasonic atomization for the first time. Note that the fraction of all particles smaller than 5.8 μm in diameter represents the inhaleable fine particle fraction and GSD of 1.3 or smaller is commonly accepted as the standard for monodispersity. Therefore, the MEMS-based MHz ultrasonic nozzle should have very significant impacts on targeted delivery of reproducible doses of medicine to the respiratory system.
- Nanotechnology Institute
Production of Monodisperse Micron-Size Droplets Using Silicon-Based MHz Ultrasonic Nozzles for Biomedical Applications
- Views Icon Views
- Share Icon Share
- Search Site
Tsai, SC, Song, YL, Cheng, CH, Wang, N, Mao, RW, Chou, YF, Lee, CT, & Tsai, CS. "Production of Monodisperse Micron-Size Droplets Using Silicon-Based MHz Ultrasonic Nozzles for Biomedical Applications." Proceedings of the ASME 2008 3rd Frontiers in Biomedical Devices Conference. ASME 2008 3rd Frontiers in Biomedical Devices Conference. Irvine, California, USA. June 18–20, 2008. pp. 27-28. ASME. https://doi.org/10.1115/BioMed2008-38050
Download citation file: