Skip Nav Destination
Proceedings Papers
In This Volume
ASME/JSME 2011 8th Thermal Engineering Joint Conference
Front Matter
Fundamentals of Heat and Mass Transfer
Biological Heat and Mass Transfer
Tissue-Light Interaction During Monitoring of Thermal Lesion Using Quantum Dot Mediated Fluorescence Thermometry
AJTEC 2011; T10001https://doi.org/10.1115/AJTEC2011-44024
Topics:
Biological tissues
,
Fluorescence
,
Quantum dots
,
Temperature measurement
,
Phantoms
,
Temperature
,
Approximation
,
Diffusion (Physics)
,
Patient treatment
,
Heating
Effect of Three-Dimensional Electric Field and Heat Conduction to Electrodes on the Temperature Rise During Irreversible Electroporation
AJTEC 2011; T10002https://doi.org/10.1115/AJTEC2011-44214
Topics:
Electric fields
,
Electrodes
,
Electroporation
,
Heat conduction
,
Temperature
,
Biological tissues
,
Damage
,
Finite element methods
,
Heating
,
Joules
Transient Analysis of Microorganism Temperature and Evaporative Losses in an Algae Biofilm Photobioreactor
AJTEC 2011; T10003https://doi.org/10.1115/AJTEC2011-44347
Topics:
Microorganisms
,
Temperature
,
Transient analysis
,
Cooling
,
Water
,
Biofuel
,
Irradiation (Radiation exposure)
,
Modeling
,
Sensitivity analysis
,
Simulation
Numerical Study on Microwave Dehydro-Freezing of Fish Tissues
AJTEC 2011; T10006https://doi.org/10.1115/AJTEC2011-44463
Topics:
Biological tissues
,
Freezing
,
Microwaves
,
Heat
,
Mass transfer
,
Computer simulation
,
Cooling
,
Drying
,
Fibers
,
Microscale devices
Time-Resolved Diffuse Optical Tomography of Human Forearm Under Exercise
Yasuomi Endo, Yukari Tanikawa, Shinpei Okawa, Kazuto Masamoto, Hidetaka Okada, Tomohiro Kizuka, Michio Miyakawa, Yoko Hoshi, Yukio Yamada
AJTEC 2011; T10010https://doi.org/10.1115/AJTEC2011-44486
Topics:
Optical tomography
,
Muscle
,
Absorption
,
Biological tissues
,
Hemodynamics
,
Wavelength
,
Biomedical imaging
,
Light absorption
,
Magnetic resonance
,
Water
Three-Dimensional Numerical Study on Freezing Phase Change Heat Transfer in Biological Tissue Embedded With Two Cryoprobes
AJTEC 2011; T10011https://doi.org/10.1115/AJTEC2011-44660
Topics:
Biological tissues
,
Freezing
,
Heat transfer
,
Cooling
,
Ice
,
Blood vessels
,
Crystal growth
,
Crystals
,
Fractals
,
Temperature
Computational Heat and Mass Transfer
CFD Investigating the Effects of Different Mixing Vane Designs on the Localized Thermal-Hydraulic Characteristics in the Rod Bundles With Grid Spacer
AJTEC 2011; T10016https://doi.org/10.1115/AJTEC2011-44009
Topics:
Computational fluid dynamics
,
Fuel rods
,
Heat transfer
,
Flow (Dynamics)
,
Design
,
Turbulence
,
Computers
,
Nuclear reactors
,
Swirling flow
Common Currency for System Integration of High Intensity Energy Subsystems
AJTEC 2011; T10017https://doi.org/10.1115/AJTEC2011-44013
Topics:
Aircraft
,
Databases
,
Design
,
Directed-energy weapons
,
Electromagnetic weapons
,
Energy dissipation
,
Energy efficiency
,
Entropy
,
Exergy
,
Fluid mechanics
Numerical Optimization of the Casting of Ceramic Material EUCOR
AJTEC 2011; T10020https://doi.org/10.1115/AJTEC2011-44058
Topics:
Casting
,
Ceramics
,
Optimization
,
Solidification
,
Computer simulation
,
Cooling
,
Heat
,
Temperature
,
Temperature gradient
,
Wear
The Model of Temperature Field and Chemical Heterogeneity of Solidifying Ductile-Cast-Iron Roller
AJTEC 2011; T10021https://doi.org/10.1115/AJTEC2011-44081
Topics:
Nodular iron
,
Rollers
,
Solidification
,
Temperature
,
Cast iron
,
Casting
,
Cooling
,
Heat treating (Metalworking)
,
Manufacturing technology
,
Mechanical properties
Scale Effects on Thermal-Fluid Performance of Optimized Hierarchical Structures
AJTEC 2011; T10022https://doi.org/10.1115/AJTEC2011-44082
Topics:
Thermofluids
,
Cooling
,
Design
,
Microscale devices
,
Computer software
,
Finite element analysis
,
Heat flux
,
Manifolds
,
Optimization
,
Size reduction (Materials)
Quantitative Evaluation of the Thickness of the Free Surface by the Interface-Tracking Method
Y. Saito, K. Yasumura, M. Shoji, Y. Matsushita, H. Aoki, T. Miura, S. Ogasawara, M. Daikoku, M. Shirota, T. Inamura
AJTEC 2011; T10023https://doi.org/10.1115/AJTEC2011-44100
Topics:
Convection
,
Diffusion (Physics)
,
Evaluation methods
,
Flow (Dynamics)
,
Shapes
,
Water
Thermodiffusion in a Binary Fluid Mixture Subject to External Vibrations: Effect of Variable Physical Properties
AJTEC 2011; T10024https://doi.org/10.1115/AJTEC2011-44109
Topics:
Fluids
,
Vibration
,
Density
,
Diffusion (Physics)
,
Flow (Dynamics)
,
Temperature
,
Temperature gradient
,
Cavities
,
Convection
,
Equations of state
Simulation of Heat and Mass Transfer Involving Vapor Condensation in the Presence of Non-Condensable Gases in Plane Channels
AJTEC 2011; T10026https://doi.org/10.1115/AJTEC2011-44138
Topics:
Condensation
,
Gases
,
Heat
,
Mass transfer
,
Simulation
,
Vapors
,
Computational fluid dynamics
,
Water vapor
,
Heat transfer coefficients
,
Computer software
Prediction of Turbulent Convective Heat Transfer to Supercritical CH4/N2 Mixture in a Vertical Circular Tube
AJTEC 2011; T10029https://doi.org/10.1115/AJTEC2011-44200
Topics:
Convection
,
Methane
,
Turbulence
,
Flow (Dynamics)
,
Heat flux
,
Temperature
,
Buoyancy
,
Heat transfer
,
Heat transfer coefficients
,
Nitrogen
Numerical Simulations of Heat Fluxes for Atmospheric Re-Entries
AJTEC 2011; T10033https://doi.org/10.1115/AJTEC2011-44234
Topics:
Computer simulation
,
Flux (Metallurgy)
,
Heat
,
Probes
,
Chemical reactions
,
Diffusion (Physics)
,
Fire
,
Flight
,
Heat conduction
,
Heat flux
Thermal Optimization for Internal Embedded Conductive Cooling Schemes Using Topology Optimization Techniques
AJTEC 2011; T10042https://doi.org/10.1115/AJTEC2011-44291
Topics:
Cooling
,
Optimization
,
Topology
,
Heat
,
Boundary-value problems
,
Convection
,
Electronic equipment
,
Heat transfer
,
Optimization algorithms
,
Thermal conductivity
Internal Turbine Blade Cooling Simulation: Advanced Models Assessment on Ribbed Configurations
AJTEC 2011; T10043https://doi.org/10.1115/AJTEC2011-44295
Topics:
Blades
,
Computational fluid dynamics
,
Coolants
,
Cooling
,
Design
,
Ducts
,
Gas turbines
,
Heat
,
Heat conduction
,
Reynolds-averaged Navier–Stokes equations
Effect of a Pair of Horizontal Frame Members on the Convective Heat Transfer With Laminar and Turbulent Flow From a Recessed Window to a Room
AJTEC 2011; T10044https://doi.org/10.1115/AJTEC2011-44298
Topics:
Convection
,
Turbulence
,
Buoyancy
,
Prandtl number
,
Computational fluid dynamics
,
Density
,
Flow (Dynamics)
,
Fluids
,
Heat transfer
,
Rayleigh number
Fundamental Study of Turbulence-Radiation Interaction in Turbulent Channel Flow Using Direct Numerical Simulation
AJTEC 2011; T10047https://doi.org/10.1115/AJTEC2011-44371
Topics:
Channel flow
,
Computer simulation
,
Radiation (Physics)
,
Turbulence
,
Temperature
,
Absorption
,
Heat transfer
,
Reynolds number
Numerical and Experimental Investigation of Temperature and Flow Field in a Full Vehicle
AJTEC 2011; T10048https://doi.org/10.1115/AJTEC2011-44405
Topics:
Flow (Dynamics)
,
Temperature
,
Vehicles
,
Simulation
,
Design
,
Simulation results
,
Computational fluid dynamics
,
Flow measurement
,
Forced convection
,
Gages
Study on Air Ingress Mitigation Methods in the Very High Temperature Gas Cooled Reactor (VHTR)
AJTEC 2011; T10049https://doi.org/10.1115/AJTEC2011-44417
Topics:
Very high temperature reactors
,
Graphite
,
Helium
,
Accidents
,
Computational fluid dynamics
,
Oxidation
,
Damage
,
Design
,
Flow (Dynamics)
,
Simulation results
Numerical Visualization of Heat Flow and Thermal Mixing in Various Differentially Heated Square Cavities Using Bejan’s Heatlines
AJTEC 2011; T10051https://doi.org/10.1115/AJTEC2011-44420
Topics:
Cavities
,
Flow (Dynamics)
,
Heat
,
Heatlines
,
Visualization
,
Corners (Structural elements)
,
Temperature
,
Finite element methods
,
Fluid dynamics
,
Galerkin method
Heat Transfer Characteristics of Baffled Channel Flow
AJTEC 2011; T10053https://doi.org/10.1115/AJTEC2011-44443
Topics:
Channel flow
,
Heat transfer
,
Flow (Dynamics)
,
Bifurcation
,
Convection
,
Design
,
Flow separation
,
Heat
,
Heat exchangers
,
Reynolds number
Three-Dimensional Simulations of the Flow Deflection in a Louvered Fin Heat Exchanger With Round Tubes in a Staggered Arrangement
AJTEC 2011; T10054https://doi.org/10.1115/AJTEC2011-44483
Topics:
Deflection
,
Engineering simulation
,
Flow (Dynamics)
,
Heat exchangers
,
Simulation
,
Vortices
,
Computer simulation
,
Pressure
A Numerical Investigation of Heat Transfer From Small Horizontal Cylinders at Near-Critical Pressures
AJTEC 2011; T10055https://doi.org/10.1115/AJTEC2011-44494
Topics:
Cylinders
,
Heat transfer
,
Fluids
,
Heat transfer coefficients
,
Temperature
,
Wire
,
Carbon dioxide
,
Computer simulation
,
Flow (Dynamics)
,
Mach number
Heat Flow Visualization for Natural Convection in Rhombic Enclosures: Bejan’s Heatline Approach
AJTEC 2011; T10056https://doi.org/10.1115/AJTEC2011-44531
Topics:
Flow visualization
,
Heat
,
Heatlines
,
Natural convection
,
Flow (Dynamics)
,
Cavities
,
Heat transfer
,
Temperature
,
Convection
,
Engineering simulation
Evaluation of Uncertainties of One-Directional Analytical Model for Thermoreflectance Technique
AJTEC 2011; T10057https://doi.org/10.1115/AJTEC2011-44539
Topics:
Thermoreflectance
,
Uncertainty
,
Computer simulation
,
Heating
,
Anisotropy
,
Computer software
,
Film thickness
,
Lasers
,
Locks (Waterways)
,
Parametric design
Comparisons Between Integral Transform, Finite Volumes and Combined Solution Strategies for Convective Heat Transfer Problems
AJTEC 2011; T10058https://doi.org/10.1115/AJTEC2011-44547
Topics:
Convection
,
Flow (Dynamics)
,
Ducts
,
Laminar flow
,
Numerical analysis
,
Steady state
,
Temperature
,
Wall temperature
Numerical Simulation of Heat and Mass Transfer of Limestone Decomposition in Normal Shaft Kiln
AJTEC 2011; T10060https://doi.org/10.1115/AJTEC2011-44578
Topics:
Computer simulation
,
Heat
,
Kilns
,
Mass transfer
,
Particulate matter
,
Chemical reactions
,
Design
,
Differential equations
,
Heat losses
,
Optimization
Unsteady Conjugate Heat Transfer Analysis of an Air Immersed Solid Particle With Application to an Innovative Heat Exchanger
AJTEC 2011; T10061https://doi.org/10.1115/AJTEC2011-44618
Topics:
Heat exchangers
,
Heat transfer
,
Particulate matter
,
Cycles
,
Gas flow
,
Heat conduction
,
Computer simulation
,
Design
,
Errors
,
Gas turbines
A Parametric Study on Fluid Flow and Heat Transfer in a Printed Circuit Heat Exchanger
AJTEC 2011; T10063https://doi.org/10.1115/AJTEC2011-44629
Topics:
Circuits
,
Fluid dynamics
,
Heat exchangers
,
Heat transfer
,
Design
,
Flow (Dynamics)
,
Friction
,
Navier-Stokes equations
,
Numerical analysis
,
Pressure drop
A 3D Numerical Simulation of a Cylindrical Towel Heater With Symmetric and Asymmetric Heating
AJTEC 2011; T10064https://doi.org/10.1115/AJTEC2011-44638
Topics:
Computer simulation
,
Heating
,
Natural convection
,
Porous materials
,
Toweling
,
Cylinders
,
Temperature
,
Prandtl number
,
Rayleigh number
,
Dimensions
Convective Heat and Mass Transfer
Convective Heat Transfer Enhancement in Nanofluids: Real Anomaly or Analysis Artifact?
AJTEC 2011; T10070https://doi.org/10.1115/AJTEC2011-44020
Topics:
Convection
,
Nanofluids
,
Uncertainty
,
Laminar flow
,
Turbulence
,
Heat transfer coefficients
,
Temperature effects
,
Viscosity
,
Databases
,
Entrance region
Influence of Particle Alignment on Thermal Diffusivity in Transformer Cores Made of Polymer Bonded Soft Magnetic Composites
AJTEC 2011; T10071https://doi.org/10.1115/AJTEC2011-44049
Topics:
Composite materials
,
Particulate matter
,
Polymers
,
Thermal diffusivity
,
Fillers (Materials)
,
Iron
,
Lasers
,
Temperature
From Chip to Cooling Tower Data Center Modeling: Influence of Air-Stream Containment on Operating Efficiency
Thomas J. Breen, Ed J. Walsh, Jeff Punch, Amip J. Shah, Cullen E. Bash, Brandon Rubenstein, Scot Heath, Niru Kumari
AJTEC 2011; T10074https://doi.org/10.1115/AJTEC2011-44091
Topics:
Containment
,
Cooling towers
,
Data centers
,
Modeling
,
Energy efficiency
,
Cooling systems
,
Air flow
,
Computers
,
Temperature
,
Cooling
Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid Crystal Technique
AJTEC 2011; T10075https://doi.org/10.1115/AJTEC2011-44127
Topics:
Heat transfer
,
Liquid crystals
,
Transients (Dynamics)
,
Rotation
,
Buoyancy
,
Coolants
,
Flow (Dynamics)
,
Turbine blades
,
Blades
,
Channel flow
An Annular Impinging Jet Alternated by Pulse-Modulated Synthetic Jets
AJTEC 2011; T10076https://doi.org/10.1115/AJTEC2011-44128
Topics:
Jets
,
Heat transfer
,
Actuators
,
Bubbles
,
Flow (Dynamics)
,
Flow control
,
Flow visualization
,
Fluids
,
Nozzles
,
Pressure
Film-Cooling Performance of Anti-Vortex Hole on a Flat Plate
AJTEC 2011; T10077https://doi.org/10.1115/AJTEC2011-44161
Topics:
Film cooling
,
Flat plates
,
Vortices
,
Coolants
,
Design
,
Density
,
Fluids
,
Geometry
,
Carbon dioxide
,
Cooling
Experimental Study on Mixed Convection Heat Transfer for Thermally Developing Flow in Horizontal Ducts With Radiation Effects
AJTEC 2011; T10078https://doi.org/10.1115/AJTEC2011-44174
Topics:
Ducts
,
Flow (Dynamics)
,
Heat transfer
,
Mixed convection
,
Radiation effects
,
Radiation (Physics)
,
Air flow
,
Design
,
Emissivity
,
Flow visualization
Entropy Generation Rate in Forced Convection Flow About Inclined Surfaces in a Porous Medium
AJTEC 2011; T10079https://doi.org/10.1115/AJTEC2011-44178
Topics:
Entropy
,
Flow (Dynamics)
,
Forced convection
,
Porous materials
,
Thermal systems
,
Heat transfer
,
Heat
,
Pressure drop
,
Temperature
,
Exergy
Numerical Predictions of Thermal and Hydraulic Performances of Heat Sinks With Enhanced Heat Transfer Capability
AJTEC 2011; T10083https://doi.org/10.1115/AJTEC2011-44245
Topics:
Heat sinks
,
Heat transfer
,
Flow (Dynamics)
,
Pins (Engineering)
,
Pressure drop
,
Computer simulation
,
Design
,
Fins
,
High pressure (Physics)
,
Reynolds number
Heat Transfer Augmentation and Suppression in Optimal Rotating Cylinders in Cross-Flow
AJTEC 2011; T10086https://doi.org/10.1115/AJTEC2011-44254
Topics:
Cross-flow
,
Cylinders
,
Heat transfer
,
Density
,
Flow (Dynamics)
,
Pressure drop
,
Rotation
,
Computational fluid dynamics
,
Computer simulation
,
Coolants
Testing of Rectangular Channels With Perturbed Entrances for Temperature Difference Under Constant Heat Flux
AJTEC 2011; T10087https://doi.org/10.1115/AJTEC2011-44259
Topics:
Heat flux
,
Temperature
,
Testing
,
Ducts
,
Entrance region
,
Heat transfer
,
Convection
,
Errors
,
Experimental analysis
,
Flow (Dynamics)
Heat Transfer Enhancement by Means of a Rotation Cylinder
AJTEC 2011; T10088https://doi.org/10.1115/AJTEC2011-44266
Topics:
Cylinders
,
Heat transfer
,
Rotation
,
Flow (Dynamics)
,
Vortices
,
Channel flow
,
Circular cylinders
Average Nusselt Number for Pressure and Suction Sides of Squealer Turbine Blade Tip
AJTEC 2011; T10089https://doi.org/10.1115/AJTEC2011-44350
Topics:
Pressure
,
Suction
,
Turbine blades
,
Cavities
,
Clearances (Engineering)
,
Heat transfer
,
Reynolds number
,
Blades
,
Computer simulation
,
Flow (Dynamics)
Transport Process by Natural Convection and Molecular Diffusion of Two Component Gases in a Stratified Fluid Layer
AJTEC 2011; T10092https://doi.org/10.1115/AJTEC2011-44409
Topics:
Diffusion (Physics)
,
Fluids
,
Gases
,
Natural convection
,
Transport processes
,
Very high temperature reactors
,
Accidents
,
Density
,
Dimensions
,
Nitrogen
Scaling of Transient Natural Convection Cooling in a Side-Cooled Cavity: The Effect of Variable Viscosity
AJTEC 2011; T10095https://doi.org/10.1115/AJTEC2011-44452
Topics:
Cavities
,
Cooling
,
Natural convection
,
Transients (Dynamics)
,
Viscosity
,
Fluids
,
Temperature
,
Boundary layers
,
Flow (Dynamics)
,
Temperature distribution
Simultaneous PIV and PLIF Measurement on the Drag Reducing Channel Flow of the Homogeneous Surfactant Solution
AJTEC 2011; T10097https://doi.org/10.1115/AJTEC2011-44464
Topics:
Channel flow
,
Drag (Fluid dynamics)
,
Surfactants
,
Drag reduction
,
Flow (Dynamics)
,
Density
,
Diffusion (Physics)
,
Fluorescence
,
Lasers
,
Mass transfer
Whole-Field Temperature and Velocity Measurements for Two-Phase Flow Using PIV/LIF
AJTEC 2011; T10100https://doi.org/10.1115/AJTEC2011-44507
Topics:
Temperature
,
Two-phase flow
,
Velocity measurement
,
Emissions
,
Fluorescence
,
Temperature measurement
,
Cavities
,
Cavity flows
,
Lasers
,
Natural convection
Channel Flow Along a Wavy Heated Wall
AJTEC 2011; T10101https://doi.org/10.1115/AJTEC2011-44530
Topics:
Channel flow
,
Flow (Dynamics)
,
Flow separation
,
Fluid dynamics
,
Geometry
,
Heat flux
,
Heat transfer
,
Momentum
,
Pressure
,
Pressure gradient
Film Cooling Effectiveness Distributions on a Flat Plate With a Double Hole Geometry Using PSP
AJTEC 2011; T10103https://doi.org/10.1115/AJTEC2011-44541
Topics:
Film cooling
,
Flat plates
,
Geometry
,
Coolants
,
Density
,
Cooling
,
Gases
,
Nitrogen
,
Pressure
,
Thin films
Experimental Analysis of the Single-Phase Heat Transfer and Friction Factor Inside the Horizontal Internally Micro-Fin Tube
AJTEC 2011; T10106https://doi.org/10.1115/AJTEC2011-44555
Topics:
Experimental analysis
,
Friction
,
Heat transfer
,
Turbulence
,
Pressure drop
,
Reynolds number
,
Buoyancy
,
Delays
,
Flow (Dynamics)
,
HVAC equipment
Scaling Laws for Electrohydrodynamic Air Movers
AJTEC 2011; T10109https://doi.org/10.1115/AJTEC2011-44626
Topics:
Electrohydrodynamics
,
Scaling laws (Mathematical physics)
,
Cooling
,
Fans
,
Air flow
,
Forced convection
,
Heat
,
Modeling
,
Physics
,
Pressure
Thermal Dispersion in Metal Foams
AJTEC 2011; T10111https://doi.org/10.1115/AJTEC2011-44640
Topics:
Metal foams
,
Heat
,
Heat conduction
,
Convection
,
Diffusion (Physics)
,
Fins
,
Flow (Dynamics)
,
Fluids
,
Heat exchangers
,
Heat transfer
Heat and Mass Transfer in Micro-Scale Systems
A Microstructure Device for Single Phase Surface Cooling
AJTEC 2011; T10116https://doi.org/10.1115/AJTEC2011-44038
Topics:
Cooling
,
Heat exchangers
,
Heat flux
,
Microchannels
,
Design
,
Pressure drop
,
Computational fluid dynamics
,
Coolers
,
Copper
,
Dimensions
Charging Station of a Planar Miniature Thermal Ground Plane
AJTEC 2011; T10117https://doi.org/10.1115/AJTEC2011-44056
Topics:
Calibration
,
Cooling
,
Design
,
Electrodes
,
Errors
,
Evacuations
,
Fluids
,
Gravity (Force)
,
Heat pipes
,
Pressure
Analysis of Laminar Slip-Flow Thermal Transport in Microchannels With Transverse Rib and Cavity Structured Superhydrophobic Walls at Constant Heat Flux
AJTEC 2011; T10120https://doi.org/10.1115/AJTEC2011-44113
Topics:
Cavities
,
Heat flux
,
Microchannels
,
Slip flow
,
Flow (Dynamics)
,
Laminar flow
,
Heat conduction
,
Heating
,
Pressure drop
,
Vapors
Simultaneous Heat Transfer and Pressure Drop Measurements for a Horizontal Micro-Tube
AJTEC 2011; T10122https://doi.org/10.1115/AJTEC2011-44218
Topics:
Heat transfer
,
Pressure drop
,
Heating
,
Surface roughness
,
Boundary-value problems
,
Friction
,
Heat flux
,
Reynolds number
,
Turbulence
,
Buoyancy
Constrained Optimization of One-Dimensional Two-Phase Flow in Fractal-Like Branching Microchannel Heat Sinks
AJTEC 2011; T10123https://doi.org/10.1115/AJTEC2011-44353
Topics:
Fractals
,
Heat sinks
,
Microchannels
,
Optimization
,
Two-phase flow
,
Critical heat flux
,
Flow (Dynamics)
,
Wall temperature
,
Design
,
Fluids
Liquid Supply and Heat Transfer Performance of Sintered Cu Monolayer Wicks for Phase Change Heat Transfer Applications
AJTEC 2011; T10124https://doi.org/10.1115/AJTEC2011-44356
Topics:
Heat transfer
,
Copper powders
,
Critical heat flux
,
Flux (Metallurgy)
,
Heat
,
Heat pipes
,
Sintering
,
Thermal conductivity
,
Thermal resistance
,
Vapors
Impact of Surface Micro-Structures on Liquid Micro-Jet Array Impingement Cooling: Comparison Between Single-Phase and Phase Change Heat Transfer
AJTEC 2011; T10126https://doi.org/10.1115/AJTEC2011-44490
Topics:
Heat transfer
,
Impingement cooling
,
Density
,
Dynamics (Mechanics)
,
Jets
,
Nucleation (Physics)
,
Reynolds number
,
Thin films
,
Water
Effect of 1D Cu Nanostructures on Heat Transfer Characteristics of Single Phase Microchannel Heat Sink
AJTEC 2011; T10128https://doi.org/10.1115/AJTEC2011-44563
Topics:
Heat sinks
,
Heat transfer
,
Microchannels
,
Nanostructures
,
Nanowires
,
Copper
,
Fluids
,
Pressure drop
,
Reynolds number
,
Water
Thermal Contact Resistance at a Metal Foam-Solid Surface Interface
AJTEC 2011; T10129https://doi.org/10.1115/AJTEC2011-44570
Topics:
Contact resistance
,
Metals
,
Metal foams
,
Thermal conductivity
,
Porosity
,
Aluminum
,
Compression
,
Computers
,
Design
,
Heat transfer
Fluid Flow Characteristics in Microchannels With Rib-Patterned Surface
AJTEC 2011; T10132https://doi.org/10.1115/AJTEC2011-44631
Topics:
Fluid dynamics
,
Microchannels
,
Friction
,
Reynolds number
,
Cavities
,
Chemical etching
,
Crystals
,
Flow (Dynamics)
,
Fluids
,
Geometry
Development of a Compact Micro Pulsating Heat Pipe
AJTEC 2011; T10133https://doi.org/10.1115/AJTEC2011-44654
Topics:
Heat pipes
,
Fluids
,
Semiconductor wafers
,
Thermal resistance
,
Computer cooling
,
Copper
,
Ethanol
,
Flat plates
,
Glass
,
Microelectromechanical systems
The Effect of Channel Diameter on Heat Transfer Characteristics of Two-Phase Flow in Microchannels
AJTEC 2011; T10134https://doi.org/10.1115/AJTEC2011-44655
Topics:
Heat transfer
,
Microchannels
,
Two-phase flow
,
Gas flow
,
Boiling
,
Fluid dynamics
,
Fluids
,
Forced convection
,
Heat flux
,
Surface tension
Heat Transfer in Manufacturing
Experimental Study on Model Predictive Control to Minimize Temperature Change of Vertical Plate With Varying Heat Generation
AJTEC 2011; T10140https://doi.org/10.1115/AJTEC2011-44018
Topics:
Heat
,
Predictive control
,
Temperature
,
Vertical plates
,
Noise (Sound)
,
Computer simulation
,
Errors
,
Heating
,
Integrated circuit fabrication
,
Network models
Scaling Thermocapillary Surface Velocity in Weld Pool
AJTEC 2011; T10141https://doi.org/10.1115/AJTEC2011-44068
Topics:
Cavities
,
Computation
,
Density
,
Diffusion (Physics)
,
Flow (Dynamics)
,
Heating
,
Melting
,
Momentum
,
Prandtl number
,
Surface tension
Thermal Analysis of Direct Chill Casting
AJTEC 2011; T10146https://doi.org/10.1115/AJTEC2011-44392
Topics:
Casting
,
Thermal analysis
,
Temperature
,
Boundary-value problems
,
Alloys
,
Aluminum
,
Cooling
,
Displacement
,
Extruding
,
Finite element methods
Measurements and Diagnostics
Heat Source Localization Sensitivity Analyses for an Ultrasonic Sensor Array
AJTEC 2011; T10154https://doi.org/10.1115/AJTEC2011-44120
Topics:
Heat
,
Sensitivity analysis
,
Ultrasonic transducers
,
Flight
,
Kalman filters
,
Heating
,
Heat conduction
,
Sensors
,
Boundary layers
,
Finite element analysis
Ultrasound Characteristics in High-Temperature Fluid
AJTEC 2011; T10158https://doi.org/10.1115/AJTEC2011-44243
Topics:
Fluids
,
High temperature
,
Ultrasound
,
Echoes
,
Glass
,
Polishing equipment
,
Cooling
,
Furnaces
,
Glass containers
,
Temperature
Visualization of Dispersed Phase Flow in Centrifugal Extractor Using Taylor-Couette Vortex Flow
AJTEC 2011; T10162https://doi.org/10.1115/AJTEC2011-44403
Topics:
Flow (Dynamics)
,
Visualization
,
Vortex flow
,
Coating processes
,
Coatings
,
Cylinders
,
Dyeing
,
Extractive metallurgy
,
Heat
,
Nuclides
Response Compensation Scheme for Constant-Current Hot-Wire Anemometry Based on Frequency Response Analysis
AJTEC 2011; T10164https://doi.org/10.1115/AJTEC2011-44437
Topics:
Frequency response
,
Turbulence
,
Wire
,
Fluctuations (Physics)
,
Temperature
,
Circuits
,
Cylinders
,
Flow (Dynamics)
,
Flow measurement
,
Heat transfer
Impact of Interstitial Mass Transport Resistance on Water Vapor Diffusion Through Southern Mills Defender™ 750 Fabric Layers
AJTEC 2011; T10168https://doi.org/10.1115/AJTEC2011-44485
Topics:
Diffusion (Physics)
,
Textiles
,
Water vapor
,
ASTM International
,
Calibration
,
Accounting
,
Flow (Dynamics)
,
Fluids
,
Porosity
,
Skin
Unsteady Flow Structure Behind a Heated Cylinder Measured by Time-Resolved PIV With Thermocouple Sensing
AJTEC 2011; T10169https://doi.org/10.1115/AJTEC2011-44499
Topics:
Cylinders
,
Thermocouples
,
Unsteady flow
,
Temperature
,
Wakes
,
Circular cylinders
,
Flow (Dynamics)
,
Inverse problems
,
Particulate matter
,
Thermofluids
Magnetic Resonance Imaging Techniques for Measuring Film Cooling Flow Velocity and Effectiveness
AJTEC 2011; T10173https://doi.org/10.1115/AJTEC2011-44639
Topics:
Film cooling
,
Flow (Dynamics)
,
Magnetic resonance imaging
,
Scalars
,
Cooling
,
Engines
,
Reynolds number
,
Boundary layers
,
Fluids
,
Gas turbines
Multi-Phase Heat and Mass Transfer
The Constrained Vapor Bubble Experiment: Results From the International Space Station
Arya Chatterjee, Joel L. Plawsky, Peter C. Wayner, Jr., David F. Chao, Ronald J. Sicker, Tibor Lorik, Louis Chestney, John Eustace, John Zoldak
AJTEC 2011; T10179https://doi.org/10.1115/AJTEC2011-44015
Topics:
Bubbles
,
Space stations
,
Vapors
,
Heat pipes
,
Corners (Structural elements)
,
Fluids
,
Gravity (Force)
,
Convection
,
Design
,
Fluid dynamics
Optimization of the Relationship Between the Two-Phase Friction Factor and Reynolds Equivalent Number Model by Means of Genetic Algorithm
AJTEC 2011; T10180https://doi.org/10.1115/AJTEC2011-44028
Topics:
Friction
,
Genetic algorithms
,
Optimization
,
Condensation
,
Flux (Metallurgy)
,
Pressure drop
,
Temperature
,
Algorithms
,
Copper
,
Evolutionary algorithms
Pool Boiling Heat Transfer of Highly Wetting Fluids on Smooth Metallic Surfaces
AJTEC 2011; T10182https://doi.org/10.1115/AJTEC2011-44045
Topics:
Fluids
,
Heat transfer
,
Metal surfaces
,
Pool boiling
,
Wetting
,
Crystals
,
Density
,
Film boiling
,
Silicon
,
Aluminum
Mass Transfer From a Bubble in a Vertical Pipe
AJTEC 2011; T10183https://doi.org/10.1115/AJTEC2011-44089
Topics:
Bubbles
,
Mass transfer
,
Pipes
,
Carbon dioxide
,
Shapes
,
Equilibrium (Physics)
,
Image processing
,
Nitrogen
,
Oxygen
A Mechanistic Heat Transfer Correlation for Non-Boiling Two-Phase Flow in Horizontal, Inclined and Vertical Pipes
AJTEC 2011; T10184https://doi.org/10.1115/AJTEC2011-44114
Topics:
Boiling
,
Heat transfer
,
Pipes
,
Two-phase flow
,
Flow (Dynamics)
,
Friction
,
Heat transfer coefficients
,
Pressure drop
,
Pipe flow
,
Reynolds number
Neutron Imaging Feasibility of Liquid Metal Coolant Behaviors Inside a High-Temperature Alloy Heat Pipe
AJTEC 2011; T10185https://doi.org/10.1115/AJTEC2011-44119
Topics:
Alloys
,
Coolants
,
Heat pipes
,
High temperature
,
Imaging
,
Liquid metals
,
Neutrons
,
Sodium
,
Electromagnetic scattering
,
Multiscale characterization
Coupling of Hydrodynamics, Vaporization and Reaction With Liquid Spray Injection Into a High-Temperature Gas-Solid Reactor
AJTEC 2011; T10186https://doi.org/10.1115/AJTEC2011-44158
Topics:
High temperature
,
Hydrodynamics
,
Sprays
,
Cracking (Materials)
,
Fracture (Process)
,
Pipeline risers
,
Risers (Casting)
,
Catalysts
,
Cooling
,
Drops
Rewetting Processes During Top/Bottom Re-Flooding of Heated Vertical Surfaces
AJTEC 2011; T10187https://doi.org/10.1115/AJTEC2011-44187
Topics:
Accidents
,
Coolants
,
Design
,
Floods
,
Flow (Dynamics)
,
Fuel rods
,
Heat
,
Imaging
,
Light water reactors
,
Metal surfaces
Liquid Film Thickness of Oscillating Flow in a Micro Tube
AJTEC 2011; T10188https://doi.org/10.1115/AJTEC2011-44190
Topics:
Flow (Dynamics)
,
Liquid films
,
Two-phase flow
,
Bubbles
,
Compressors
,
Condensation
,
Displacement
,
Ethanol
,
Evaporation
,
Fluids
Effects of Pitch and Depth on the Condensation Heat Transfer of R-134a Flowing Through Corrugated Tubes
AJTEC 2011; T10190https://doi.org/10.1115/AJTEC2011-44262
Topics:
Condensation
,
Heat transfer
,
Flow (Dynamics)
,
Heat exchangers
,
Heat transfer coefficients
,
Pressure drop
,
Annulus
,
Refrigerants
,
Wall temperature
,
Water
Comparison of Various Alternative Refrigerants for Vapour Compression Refrigeration Systems
AJTEC 2011; T10191https://doi.org/10.1115/AJTEC2011-44267
Topics:
Compression
,
Refrigerants
,
Refrigeration
,
Cycles
,
Heat exchangers
,
Temperature
,
Cascades (Fluid dynamics)
,
Compressors
,
Condensation
,
Condensers (steam plant)
Numerical Study on Subcooled Pool Boiling
AJTEC 2011; T10193https://doi.org/10.1115/AJTEC2011-44401
Topics:
Pool boiling
,
Subcooling
,
Boiling
,
Condensation
,
Computer simulation
,
Bubbles
,
Enthalpy
,
Equilibrium (Physics)
,
Heat conduction
,
Heat transfer
Thermal Fluctuations and Heat Transfer Measurements in an Externally Heated Rotary Cylinder
AJTEC 2011; T10198https://doi.org/10.1115/AJTEC2011-44573
Topics:
Cylinders
,
Fluctuations (Physics)
,
Heat transfer
,
Temperature
,
Glass beads
,
Granular materials
,
Heat
,
Heat transfer coefficients
,
Rods
,
Sands
Phase Change Phenomena and Heat Transfer
Numerical Model of Heat Transfer and Mass Transfer During the Solidification of a Concasting Steel
AJTEC 2011; T10206https://doi.org/10.1115/AJTEC2011-44031
Topics:
Computer simulation
,
Heat transfer
,
Mass transfer
,
Solidification
,
Steel
,
Cooling
,
Nozzles
,
Temperature
,
Boundary-value problems
,
Blanks
Lower Limit of Homogeneous Nucleation Boiling Explosion in Water During Linear Boundary Heating and Contact With High Temperature Surface
AJTEC 2011; T10207https://doi.org/10.1115/AJTEC2011-44051
Topics:
Boiling
,
Explosions
,
Heating
,
High temperature
,
Nucleation (Physics)
,
Water
,
Temperature
,
Steady state
,
Atmospheric pressure
,
Cavities
Extension of the Full Cavitation Model for Cryogenic Fluids
AJTEC 2011; T10211https://doi.org/10.1115/AJTEC2011-44087
Topics:
Cavitation
,
Fluids
,
Computational fluid dynamics
,
Density
,
Flow (Dynamics)
,
Hydrogen
,
Nitrogen
,
Temperature
,
Vapor pressure
,
Algorithms
Functional Materials for Energy Storage: Fabrication of Shape Stabilized Polymeric Phase Change Composites and the Determination of Their Thermophysical Properties for Use in Energy Conservation Applications
AJTEC 2011; T10212https://doi.org/10.1115/AJTEC2011-44092
Topics:
Composite materials
,
Energy conservation
,
Energy storage
,
Functional materials
,
Manufacturing
,
Shapes
,
Temperature
,
Containers
,
Cooling
,
Water
Effect of the Bottom and Top Configurations on Pool Film Boiling Around a Vertical Finite-Length Cylinder
Satoru Momoki, Kenichi Araki, Toru Shigechi, Takashi Yamada, Kaoru Toyoda, Tomohiko Yamaguchi, Jambal Odgerel
AJTEC 2011; T10216https://doi.org/10.1115/AJTEC2011-44122
Topics:
Cylinders
,
Film boiling
,
Heat transfer
,
Vapors
,
Water
,
Convection
,
Cooling
,
Heat flux
,
Heat transfer coefficients
,
Subcooling
Modified Magnesium Hydride and Calcium Borohydride for High-Capacity Thermal Energy Storage
AJTEC 2011; T10217https://doi.org/10.1115/AJTEC2011-44133
Topics:
Magnesium (Metal)
,
Thermal energy storage
,
Catalysts
,
Temperature
,
Atmospheric pressure
,
Ball milling
,
Desorption
,
Milling
,
Nickel alloys
,
Thermal energy
Experimental Verification of Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials (NEPCM)
AJTEC 2011; T10221https://doi.org/10.1115/AJTEC2011-44165
Topics:
Freezing
,
Nanoparticles
,
Phase change materials
,
Thermal conductivity
,
Copper
,
Particulate matter
,
Sedimentation
,
Slabs
,
Supercooling
,
Thermocouples
Effect of Cooling Water Temperature on Impinging Jet Heat Transfer on Hot Steel Plate
AJTEC 2011; T10222https://doi.org/10.1115/AJTEC2011-44211
Topics:
Cooling
,
Heat transfer
,
Steel
,
Water temperature
,
Heat flux
,
Water
,
Nozzles
,
Engineering systems and industry applications
,
Flow (Dynamics)
,
Gages
A Design for Loop Thermosyphon Including Effect of Non-Condensable Gas
AJTEC 2011; T10223https://doi.org/10.1115/AJTEC2011-44244
Topics:
Design
,
Cooling
,
Leakage
,
Pressure
,
Heating
,
Thermal resistance
,
Approximation
,
Condensation
,
Electronics
,
Evaporation