0
Manufacturing & Processing
Email Alert
Please Wait... Processing your request... Please Wait.

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Jonas S Madsen, Poul Erik Hansen, Pierre Boher, Deepak Dwarakanath, Jan F J⊘rgensen, Brian Bilenberg, Jesper Nygård and Morten H Madsen
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4036889

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Han Wang and Hong Shen
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4036890

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Jhonatam Rodrigues and Salil Desai
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4036891

Journal of Engineering Materials and Technology  |  research-article
2017
Jin Chul Yun and Seong Jin Park
J. Eng. Mater. Technol 139, 041008 (2017) (11 pages);  doi:10.1115/1.4036709

Journal of Manufacturing Science and Engineering  |  research-article
2017
Kai Chen, Xun Liu and Jun Ni
J. Manuf. Sci. Eng 139, 081016 (2017) (9 pages);  doi:10.1115/1.4036225

Journal of Engineering Materials and Technology  |  research-article
2017
Ingrid M. Padilla Espinosa, Wayne Hodo, John S. Rivas Murillo, A. M. Rajendran and Ram V. Mohan
J. Eng. Mater. Technol 139, 041007 (2017) (7 pages);  doi:10.1115/1.4036588

Journal of Manufacturing Science and Engineering  |  research-article
2017
Jianguo Wu, Yuan Yuan and Xiaochun Li
J. Manuf. Sci. Eng 139, 081017 (2017) (11 pages);  doi:10.1115/1.4036642

Journal of Engineering Materials and Technology  |  research-article
2017
Najmul H. Abid, Rashid K. Abu Al-Rub and Anthony N. Palazotto
J. Eng. Mater. Technol 139, 041006 (2017) (8 pages);  doi:10.1115/1.4036687

Journal of Nuclear Engineering and Radiation Science  |  Technical Brief
2017
Rony Reuven, Alan Bolind, Nils Haneklaus, Cristian Cionea, Charalampos Andreades, Grant Buster, Peter Hosemann and Per Peterson
ASME J of Nuclear Rad Sci 3, 030913 (2017) (6 pages);  doi:10.1115/1.4035725

Journal of Pressure Vessel Technology  |  research-article
2017
DEEPESH V, Krishnan Balasubramaniam and Prabhu Rajagopal
J. Pressure Vessel Technol , (2017);  doi:10.1115/1.4036852

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
OPEN ACCESS Front Matter
Ultrasonic Welding of Lithium-Ion Batteries Front Matter (2017) (12 pages);  doi:10.1115/1.861257_fm

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
Wayne Cai, Shawn Lee and S. Jack Hu
Ultrasonic Welding of Lithium-Ion Batteries Introduction (2017) (14 pages);  doi:10.1115/1.861257_ch1

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
S. Shawn Lee, Tae Hyung Kim, S. Jack Hu, Wayne Cai, Jeffrey A. Abell and Jingjing Li
Ultrasonic Welding of Lithium-Ion Batteries Defining Joint Quality Using Weld Attributes (2017) (22 pages);  doi:10.1115/1.861257_ch2

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
Xin Wu, Teng Liu and Wayne Cai
Ultrasonic Welding of Lithium-Ion Batteries Welding Mechanism and Failure of Ultrasonic Welds (2017) (18 pages);  doi:10.1115/1.861257_ch3

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
S. Shawn Lee, Tae Hyung Kim, S. Jack Hu, Wayne Cai and Jeffrey A. Abell
Ultrasonic Welding of Lithium-Ion Batteries Motion Analysis for Multilayer Sheets (2017) (12 pages);  doi:10.1115/1.861257_ch5

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
Hongtao Ding, Ninggang Shen, Avik Samanta and Wayne Cai
Ultrasonic Welding of Lithium-Ion Batteries Microstructure Evolution and Physics-Based Modeling (2017) (20 pages);  doi:10.1115/1.861257_ch7

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
S. Shawn Lee, Chenhui Shao, Tae Hyung Kim, S. Jack Hu, Elijah Kannatey-Asibu, Wayne Cai, J. Patrick Spicer and Jeffrey A. Abell
Ultrasonic Welding of Lithium-Ion Batteries Process Monitoring Using Online Sensor Signals (2017) (16 pages);  doi:10.1115/1.861257_ch8

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
Bongsu Kang, Wayne Cai and Chin-An Tan
Ultrasonic Welding of Lithium-Ion Batteries Fundamental Dynamics of Ultrasonic Welding (2017) (28 pages);  doi:10.1115/1.861257_ch10

Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants  |  Paper
2017
ASME Committee
Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants Off-Site Fabrication and Assembly (2017) (2 pages);  doi:10.1115/1.861264_ch6

Geothermal Heat Pump and Heat Engine Systems: Theory and Practice  |  Paper
2016
Geothermal Heat Pump and Heat Engine Systems: Theory and Practice Energy Economics and Environmental Impact (2016) (12 pages);  doi:10.1115/1.861HPEQ_ch16

Volume 1: Advances in Aerospace Technology
2016
IMECE2016, pp. V001T00A001- (2016) 1 pages
doi:10.1115/IMECE2016-NS1

Volume 1: Advances in Aerospace Technology
2016
Erasmo Carrera, Alberto García de Miguel, Alfonso Pagani and Marco Petrolo
IMECE2016, pp. V001T03A008- (2016) 10 pages
doi:10.1115/IMECE2016-65644

Volume 1: Advances in Aerospace Technology
2016
Andrea Viglietti, Enrico Zappino and Erasmo Carrera
IMECE2016, pp. V001T03A009- (2016) 8 pages
doi:10.1115/IMECE2016-66681

Volume 1: Advances in Aerospace Technology
2016
Yeqing Wang, Olesya I. Zhupanska and Crystal Pasiliao
IMECE2016, pp. V001T03A030- (2016) 8 pages
doi:10.1115/IMECE2016-65728

Volume 1: Advances in Aerospace Technology
2016
Nasim Abuali Galehdari and Ajit D. Kelkar
IMECE2016, pp. V001T03A032- (2016) 5 pages
doi:10.1115/IMECE2016-66774

Volume 1: Advances in Aerospace Technology
2016
Carlos D. Garcia, Raudel O. Avila and Pavana Prabhakar
IMECE2016, pp. V001T03A035- (2016) 7 pages
doi:10.1115/IMECE2016-66294

Volume 1: Advances in Aerospace Technology
2016
Ashwin Rai, Nithya Subramanian and Aditi Chattopadhyay
IMECE2016, pp. V001T03A036- (2016) 10 pages
doi:10.1115/IMECE2016-65447

Volume 1: Advances in Aerospace Technology
2016
Behzad Rankouhi, Fereidoon Delfanian, Robert McTaggart and Todd Letcher
IMECE2016, pp. V001T03A042- (2016) 9 pages
doi:10.1115/IMECE2016-67745

Volume 1: Advances in Aerospace Technology
2016
Tommaso Cavallo, Alfonso Pagani, Enrico Zappino and Erasmo Carrera
IMECE2016, pp. V001T03A052- (2016) 10 pages
doi:10.1115/IMECE2016-66696

Volume 2: Advanced Manufacturing
2016
Sourabh Deshpande, Nithin Rao, Nitin Pradhan and John L. Irwin
IMECE2016, pp. V002T02A062- (2016) 9 pages
doi:10.1115/IMECE2016-65910

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In