0
Manufacturing & Processing
Email Alert
Please Wait... Processing your request... Please Wait.

Journal of Mechanical Design  |  research-article
2018
Paul Egan, Isabella Bauer, Kristina Shea and Stephen Ferguson
J. Mech. Des , (2018);  doi:10.1115/1.4042213

Journal of Pressure Vessel Technology  |  research-article
2018
Meng Zhang, Zhanshu He, Yuanxi Zhang, Xingdong Wang, Shusen Zhao, Ting Fu and Lei Chen
J. Pressure Vessel Technol 141, 011401 (2018) (12 pages);  doi:10.1115/1.4041940

Journal of Electrochemical Energy Conversion and Storage  |  research-article
2018
Yan-Xian Sun, Hong-Min Guan, Zhao-Hua Jiang and Zhen-Bo Wang
J. Electrochem. En. Conv. Stor. 16, 021007 (2018) (3 pages);  doi:10.1115/1.4041980

Journal of Tribology  |  research-article
2018
Santanu Sardar, Santanu Kumar Karmakar and Debdulal Das
J. Tribol , (2018);  doi:10.1115/1.4042198

Journal of Manufacturing Science and Engineering  |  research-article
2018
Shun Liu, Sun Jin, Xueping Zhang, Kun Chen, Ang Tian and Lifeng Xi
J. Manuf. Sci. Eng , (2018);  doi:10.1115/1.4042188

Journal of Manufacturing Science and Engineering  |  Guest Editorial
2018
Sara Behdad, William Bernstein and Karl R. Haapala
J. Manuf. Sci. Eng , (2018);  doi:10.1115/1.4042187

Journal of Manufacturing Science and Engineering  |  research-article
2018
Yue Wang, Gamini Mendis, Shitong Peng and John Sutherland
J. Manuf. Sci. Eng , (2018);  doi:10.1115/1.4042150

Journal of Micro and Nano-Manufacturing  |  Review Article
2018
Yiwei Han and Jingyan Dong
J. Micro Nano-Manuf 6, 040802 (2018) (20 pages);  doi:10.1115/1.4041934

Journal of Mechanical Design  |  research-article
2018
Erva Ulu, Runze Huang, Levent Burak Kara and Kate S. Whitefoot
J. Mech. Des , (2018);  doi:10.1115/1.4042112

Journal of Computing and Information Science in Engineering  |  research-article
2018
John Steuben, Andrew Birnbaum, Athanasios P. Iliopoulos and John Michopoulos
J. Comput. Inf. Sci. Eng , (2018);  doi:10.1115/1.4042105

Marketing of Engineering Consultancy Services: A Global Perspective  |  Paper
2019
Pradeep Kumar Chatterjee and Partho Pratim Chatterjee
Marketing of Engineering Consultancy Services: A Global Perspective Introduction (2019) (4 pages);  doi:10.1115/1.861837_ch1

Marketing of Engineering Consultancy Services: A Global Perspective  |  Paper
2019
Pradeep Kumar Chatterjee and Partho Pratim Chatterjee
Marketing of Engineering Consultancy Services: A Global Perspective Concern for Quality: Cost-Benefit Analysis of Quality of Engineering Consultancy Services (2019) (2 pages);  doi:10.1115/1.861837_ch6

Marketing of Engineering Consultancy Services: A Global Perspective  |  Paper
2019
Pradeep Kumar Chatterjee and Partho Pratim Chatterjee
Marketing of Engineering Consultancy Services: A Global Perspective Formulating Marketing Mixes (8Ps) for Engineering Consultancy Services (2019) (24 pages);  doi:10.1115/1.861837_ch14

Engineering Optimization: Applications, Methods, and Analysis  |  Paper
2018
R. Russell Rhinehart
Engineering Optimization: Applications, Methods, and Analysis Case Study 2: Queuing Study (2018) (4 pages);  doi:10.1115/1.861OPT_ch37

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
PUBLIC ACCESS Front Matter
Chao Li
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Front Matter (2018) (8 pages);  doi:10.1115/1.861677_fm

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Ali Asghar Heydari, Mohammad Mohseni, Mohammad Vahedi and Najmeddin Arab
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Simulation of Steel Sheets Cold Rolling in Normal Friction Condition (2018) (10 pages);  doi:10.1115/1.861677_ch25

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Li-Ming Sun, Xiao-Fen Han, Yan Wang and Dong-Fang Liu
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Study on Effect of Simulation Grinding Wheel Diameter Change on Cutting Edge Curves of Ball-nose End Mill (2018) (5 pages);  doi:10.1115/1.861677_ch26

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Wei Chen
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Application of “Stability and Dexterity” in Farm Machinery Product (2018) (6 pages);  doi:10.1115/1.861677_ch27

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Wei Wang
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Aircraft Winglet Assembly Tolerance Analysis and Scheme Comparison (2018) (7 pages);  doi:10.1115/1.861677_ch35

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Lei Bai
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Design of Mechanical Structure of an Extrusion-type 3D Printer (2018) (6 pages);  doi:10.1115/1.861677_ch38

 1-20 of 11539 Articles
Volume 1: Advances in Control Design Methods; Advances in Nonlinear Control; Advances in Robotics; Assistive and Rehabilitation Robotics; Automotive Dynamics and Emerging Powertrain Technologies; Automotive Systems; Bio Engineering Applications; Bio-Mechatronics and Physical Human Robot Interaction; Biomedical and Neural Systems; Biomedical and Neural Systems Modeling, Diagnostics, and Healthcare
2018
DSCC2018, pp. V001T00A001- (2018) 1 pages
doi:10.1115/DSCC2018-NS1

Volume 1: Advances in Control Design Methods; Advances in Nonlinear Control; Advances in Robotics; Assistive and Rehabilitation Robotics; Automotive Dynamics and Emerging Powertrain Technologies; Automotive Systems; Bio Engineering Applications; Bio-Mechatronics and Physical Human Robot Interaction; Biomedical and Neural Systems; Biomedical and Neural Systems Modeling, Diagnostics, and Healthcare
2018
Yingxin Qiu, Keerthana Murali, Jun Ueda, Atsushi Okabe and Dalong Gao
DSCC2018, pp. V001T12A005- (2018) 8 pages
doi:10.1115/DSCC2018-9222

Volume 1: Advances in Control Design Methods; Advances in Nonlinear Control; Advances in Robotics; Assistive and Rehabilitation Robotics; Automotive Dynamics and Emerging Powertrain Technologies; Automotive Systems; Bio Engineering Applications; Bio-Mechatronics and Physical Human Robot Interaction; Biomedical and Neural Systems; Biomedical and Neural Systems Modeling, Diagnostics, and Healthcare
2018
Amir Hosein Zamanian, Daniel Allen Porter, Paul Krueger and Edmond Richer
DSCC2018, pp. V001T12A006- (2018) 7 pages
doi:10.1115/DSCC2018-9227

Volume 2: Control and Optimization of Connected and Automated Ground Vehicles; Dynamic Systems and Control Education; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Energy Systems; Estimation and Identification; Intelligent Transportation and Vehicles; Manufacturing; Mechatronics; Modeling and Control of IC Engines and Aftertreatment Systems; Modeling and Control of IC Engines and Powertrain Systems; Modeling and Management of Power Systems
2018
DSCC2018, pp. V002T00A001- (2018) 1 pages
doi:10.1115/DSCC2018-NS2

Volume 2: Control and Optimization of Connected and Automated Ground Vehicles; Dynamic Systems and Control Education; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Energy Systems; Estimation and Identification; Intelligent Transportation and Vehicles; Manufacturing; Mechatronics; Modeling and Control of IC Engines and Aftertreatment Systems; Modeling and Control of IC Engines and Powertrain Systems; Modeling and Management of Power Systems
2018
Tomasz Piatkowski and Miroslaw Wolski
DSCC2018, pp. V002T16A002- (2018) 6 pages
doi:10.1115/DSCC2018-8928

Volume 2: Control and Optimization of Connected and Automated Ground Vehicles; Dynamic Systems and Control Education; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Energy Systems; Estimation and Identification; Intelligent Transportation and Vehicles; Manufacturing; Mechatronics; Modeling and Control of IC Engines and Aftertreatment Systems; Modeling and Control of IC Engines and Powertrain Systems; Modeling and Management of Power Systems
2018
Florian Browne, George Chiu, Neera Jain and Brad Rees
DSCC2018, pp. V002T23A002- (2018) 10 pages
doi:10.1115/DSCC2018-9028

Volume 3: Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control
2018
DSCC2018, pp. V003T00A001- (2018) 1 pages
doi:10.1115/DSCC2018-NS3

Volume 3: Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control
2018
Amanda Hashimoto, Nicole Abaid, Subhradeep Roy, Benjamin Jantzen and Colin Shea-Blymyer
DSCC2018, pp. V003T30A008- (2018) 8 pages
doi:10.1115/DSCC2018-9139

Volume 3: Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control
2018
Andong Dai and Yunjun Xu
DSCC2018, pp. V003T32A006- (2018) 8 pages
doi:10.1115/DSCC2018-9040

Volume 3: Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control
2018
Francesco Sanfedino, Daniel Alazard, Valérie Pommier-Budinger, Fabrice Boquet and Alexandre Falcoz
DSCC2018, pp. V003T40A002- (2018) 10 pages
doi:10.1115/DSCC2018-8918

Volume 3: Modeling and Validation; Multi-Agent and Networked Systems; Path Planning and Motion Control; Tracking Control Systems; Unmanned Aerial Vehicles (UAVs) and Application; Unmanned Ground and Aerial Vehicles; Vibration in Mechanical Systems; Vibrations and Control of Systems; Vibrations: Modeling, Analysis, and Control
2018
Shenghai Wang, Aldo Ferri, William Singhose and Yujia Yang
DSCC2018, pp. V003T40A003- (2018) 10 pages
doi:10.1115/DSCC2018-8967

Volume 1: Pipeline and Facilities Integrity
2018
IPC2018, pp. V001T00A001- (2018) 1 pages
doi:10.1115/IPC2018-NS1

Volume 1: Pipeline and Facilities Integrity
2018
Douglas Dewar, Greg Van Boven, Mohamed ElSeify, Paul Bjorn and Nick Bruce
IPC2018, pp. V001T03A011- (2018) 10 pages
doi:10.1115/IPC2018-78466

Volume 2: Pipeline Safety Management Systems; Project Management, Design, Construction, and Environmental Issues; Strain Based Design; Risk and Reliability; Northern Offshore and Production Pipelines
2018
IPC2018, pp. V002T00A001- (2018) 1 pages
doi:10.1115/IPC2018-NS2

Volume 2: Pipeline Safety Management Systems; Project Management, Design, Construction, and Environmental Issues; Strain Based Design; Risk and Reliability; Northern Offshore and Production Pipelines
2018
Michael Tozer and Debra Tetteh-Wayoe
IPC2018, pp. V002T02A018- (2018) 8 pages
doi:10.1115/IPC2018-78230

Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining
2018
IPC2018, pp. V003T00A001- (2018) 1 pages
doi:10.1115/IPC2018-NS3

Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining
2018
Chris Alexander, Ryan LaVergne and Alan Turner
IPC2018, pp. V003T04A001- (2018) 12 pages
doi:10.1115/IPC2018-78037

Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining
2018
Chris Alexander and Richard Kania
IPC2018, pp. V003T04A040- (2018) 9 pages
doi:10.1115/IPC2018-78016

Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining
2018
Majid TabkhPaz, Lindsay Howell, Zachary Kockerbeck, Simon Park and Ron Hugo
IPC2018, pp. V003T04A044- (2018) 10 pages
doi:10.1115/IPC2018-78179

Volume 3: Operations, Monitoring, and Maintenance; Materials and Joining
2018
Philippa L. Moore and Wee Liam Khor
IPC2018, pp. V003T05A004- (2018) 7 pages
doi:10.1115/IPC2018-78278

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In