0
Nanotechnology
Email Alert
Please Wait... Processing your request... Please Wait.

 1-20 of 2580 Articles
Journal of Thermal Science and Engineering Applications  |  research-article
2017
Tasawar Hayat, Mumtaz Khan, Taseer Muhammad and Ahmed Alsaedi
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038700

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Ravi Babu Sajja and Sambasiva rao G
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038701

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Sumita Debbarma and Rahul Dev Misra
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038708

Journal of Tribology  |  research-article
2017
Oluwatoyin Joseph Gbadeyan and Krishnan Kanny
J. Tribol , (2017);  doi:10.1115/1.4038679

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Yancheng Wang, Dai Xue and Deqing Mei
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038675

Journal of Micro and Nano-Manufacturing  |  Technical Brief
2017
Joon Hyong Cho and Michael Cullinan
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038676

Journal of Dynamic Systems, Measurement, and Control  |  research-article
2017
Robert H. Rogne, Torleiv H. Bryne, Thor Fossen and Tor Arne Johansen
J. Dyn. Sys., Meas., Control , (2017);  doi:10.1115/1.4038647

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Pedram Parandoush, Hanxiong Fan, Xiaolei Song and Dong Lin
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038669

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Xiuqing Hao, Hanlong Li, Xiaolu Song, Liang Li and Ning He
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038629

Journal of Micro and Nano-Manufacturing  |  Technical Brief
2017
Buddhika Jayasena and Shreyes Melkote
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038606

Journal of Heat Transfer  |  research-article
2017
Xiao Yuan, Songping Mo, Ying Chen, Lisi Jia, Tao Yin, Zhi Yang and Zhengdong Cheng
J. Heat Transfer , (2017);  doi:10.1115/1.4038558

Journal of Heat Transfer  |  research-article
2017
Alan Lugarini, Admilson T. Franco and Marcelo Risso Errera
J. Heat Transfer , (2017);  doi:10.1115/1.4038559

Journal of Micro and Nano-Manufacturing  |  research-article
2017
Lu Lu, Erina Baynojir Joyee and Yayue Pan
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038574

Journal of Micro and Nano-Manufacturing  |  Guest Editorial
2017
Yayue Pan
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038575

Journal of Heat Transfer  |  research-article
2017
Fayao Xu, Huiying Wu and Zhenyu Liu
J. Heat Transfer 140, 031501 (2017) (10 pages);  doi:10.1115/1.4038194

Journal of Dynamic Systems, Measurement, and Control  |  research-article
2017
Prasanth Kandula and Lili Dong
J. Dyn. Sys., Meas., Control , (2017);  doi:10.1115/1.4038493

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Aditi Sengupta and P.S. Ghoshdastidar
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038483

Journal of Heat Transfer  |  Technical Brief
2017
Arunkumar V and Sarith P Sathian
J. Heat Transfer , (2017);  doi:10.1115/1.4038477

Applied Mechanics Reviews  |  Review Article
2017
Samit Roy, John Ryan, Samantha Webster and Dhriti Nepal
Appl. Mech. Rev 69, 050802 (2017) (18 pages);  doi:10.1115/1.4038257

Journal of Micro and Nano-Manufacturing  |  Technical Brief
2017
Chi Zhou, Guanglei Zhao and Dong Lin
J. Micro Nano-Manuf , (2017);  doi:10.1115/1.4038452

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Kota Tomatsu, Tomohiko Omura and Yoshikazu Todaka
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Influence of Hydrogen on Nanohardness of Pure Iron with Different Dislocation Densities Investigated by Electrochemical Nanoindentation (2017) (8 pages);  doi:10.1115/1.861387_ch38

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Axel Griesche, Beate Pfretzschner, Thomas Schaupp, Thomas Kannengiesser and Nikolay Kardjilov
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Measurement of Hydrogen Distributions in Metals by Neutron Radiography and Tomography (2017) (7 pages);  doi:10.1115/1.861387_ch46

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Ryosuke Komoda, Nobutomo Morita, Fumiya Nakashima, Masanobu Kubota and Renshi Sawada
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Development of New Measurement Method Applying MEMS Technology for Relative Slip Range During Fretting Fatigue Test in Hydrogen (2017) (8 pages);  doi:10.1115/1.861387_ch51

High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging  |  Paper
2017
OPEN ACCESS Front Matter
High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging Front Matter (2017) (8 pages);  doi:10.1115/1.860441_fm

High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging  |  Paper
2017
High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging Micromachined Piezo-Composite (2017) (16 pages);  doi:10.1115/1.860441_ch4

High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging  |  Paper
2017
High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging Micromachined 1-3 Composite Single Element Transducers (2017) (16 pages);  doi:10.1115/1.860441_ch5

High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging  |  Paper
2017
High Frequency Piezo-Composite Micromachined Ultrasound Transducer Array Technology for Biomedical Imaging Micromachined High Frequency Transducer Arrays (2017) (20 pages);  doi:10.1115/1.860441_ch6

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
Wayne Cai, Shawn Lee and S. Jack Hu
Ultrasonic Welding of Lithium-Ion Batteries Introduction (2017) (14 pages);  doi:10.1115/1.861257_ch1

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
Jingzhou Zhao, Hang Li, Hongseok Choi, Chao Ma, Wayne Cai, Jeffrey A. Abell and Xiaochun Li
Ultrasonic Welding of Lithium-Ion Batteries Transient Temperature and Heat Flux Measurement Using Thin-Film Microsensors (2017) (20 pages);  doi:10.1115/1.861257_ch4

Advances in Multidisciplinary Engineering  |  Paper
2016
Said Jahanmir, Michael J. Tomaszewski and Hooshang Heshmat
Advances in Multidisciplinary Engineering Ultra High-Speed Micro-Milling of Aluminum Alloy (2016) (10 pages);  doi:10.1115/1.861080_ch18

ASME/BATH 2017 Symposium on Fluid Power and Motion Control
2017
Massimiliano Ruggeri, Giorgio Paolo Massarotti, Luca Belsito and Alberto Roncaglia
FPMC2017, pp. V001T01A076- (2017) 8 pages
doi:10.1115/FPMC2017-4355

Volume 1: Aerospace Applications; Advances in Control Design Methods; Bio Engineering Applications; Advances in Non-Linear Control; Adaptive and Intelligent Systems Control; Advances in Wind Energy Systems; Advances in Robotics; Assistive and Rehabilitation Robotics; Biomedical and Neural Systems Modeling, Diagnostics, and Control; Bio-Mechatronics and Physical Human Robot; Advanced Driver Assistance Systems and Autonomous Vehicles; Automotive Systems
2017
Keyvan Mollaeian, Yi Liu and Juan Ren
DSCC2017, pp. V001T08A005- (2017) 8 pages
doi:10.1115/DSCC2017-5254

Volume 2: Mechatronics; Estimation and Identification; Uncertain Systems and Robustness; Path Planning and Motion Control; Tracking Control Systems; Multi-Agent and Networked Systems; Manufacturing; Intelligent Transportation and Vehicles; Sensors and Actuators; Diagnostics and Detection; Unmanned, Ground and Surface Robotics; Motion and Vibration Control Applications
2017
Fadi M. Alsaleem and Mohammad H. Hasan
DSCC2017, pp. V002T18A004- (2017) 6 pages
doi:10.1115/DSCC2017-5333

Volume 2: Mechatronics; Estimation and Identification; Uncertain Systems and Robustness; Path Planning and Motion Control; Tracking Control Systems; Multi-Agent and Networked Systems; Manufacturing; Intelligent Transportation and Vehicles; Sensors and Actuators; Diagnostics and Detection; Unmanned, Ground and Surface Robotics; Motion and Vibration Control Applications
2017
Sicheng Yi and Qingze Zou
DSCC2017, pp. V002T23A002- (2017) 6 pages
doi:10.1115/DSCC2017-5103

Volume 3: Vibration in Mechanical Systems; Modeling and Validation; Dynamic Systems and Control Education; Vibrations and Control of Systems; Modeling and Estimation for Vehicle Safety and Integrity; Modeling and Control of IC Engines and Aftertreatment Systems; Unmanned Aerial Vehicles (UAVs) and Their Applications; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Control of Smart Buildings and Microgrids; Energy Systems
2017
Ezequiel Juarez, Dumitru I. Caruntu and Young-Gil Park
DSCC2017, pp. V003T32A002- (2017) 6 pages
doi:10.1115/DSCC2017-5120

Volume 3: Vibration in Mechanical Systems; Modeling and Validation; Dynamic Systems and Control Education; Vibrations and Control of Systems; Modeling and Estimation for Vehicle Safety and Integrity; Modeling and Control of IC Engines and Aftertreatment Systems; Unmanned Aerial Vehicles (UAVs) and Their Applications; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Control of Smart Buildings and Microgrids; Energy Systems
2017
Martin Botello, Christian Reyes, Julio Beatriz and Dumitru I. Caruntu
DSCC2017, pp. V003T32A003- (2017) 7 pages
doi:10.1115/DSCC2017-5122

Volume 3: Vibration in Mechanical Systems; Modeling and Validation; Dynamic Systems and Control Education; Vibrations and Control of Systems; Modeling and Estimation for Vehicle Safety and Integrity; Modeling and Control of IC Engines and Aftertreatment Systems; Unmanned Aerial Vehicles (UAVs) and Their Applications; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Control of Smart Buildings and Microgrids; Energy Systems
2017
Christopher Reyes and Dumitru I. Caruntu
DSCC2017, pp. V003T32A004- (2017) 8 pages
doi:10.1115/DSCC2017-5124

Volume 3: Vibration in Mechanical Systems; Modeling and Validation; Dynamic Systems and Control Education; Vibrations and Control of Systems; Modeling and Estimation for Vehicle Safety and Integrity; Modeling and Control of IC Engines and Aftertreatment Systems; Unmanned Aerial Vehicles (UAVs) and Their Applications; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Control of Smart Buildings and Microgrids; Energy Systems
2017
Julio Beatriz, Martin Botello, Christian Reyes and Dumitru I. Caruntu
DSCC2017, pp. V003T32A007- (2017) 5 pages
doi:10.1115/DSCC2017-5186

Volume 1: Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Bioinspired Smart Materials and Systems; Energy Harvesting; Emerging Technologies
2017
G. Y. Liao, S. Geier, T. Mahrholz, P. Wierach and M. Wiedemann
SMASIS2017, pp. V001T01A011- (2017) 8 pages
doi:10.1115/SMASIS2017-3908

Volume 1: Development and Characterization of Multifunctional Materials; Mechanics and Behavior of Active Materials; Bioinspired Smart Materials and Systems; Energy Harvesting; Emerging Technologies
2017
Sebastian M. Geier, Peter Wierach, Thorsten Mahrholz and Michael Sinapius
SMASIS2017, pp. V001T01A013- (2017) 9 pages
doi:10.1115/SMASIS2017-3975

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In