0
Heat Transfer
Email Alert
Please Wait... Processing your request... Please Wait.

Journal of Manufacturing Science and Engineering  |  research-article
2017
Zhenguo Nie, Gang Wang, Dehao Liu and Yiming Rong
J. Manuf. Sci. Eng , (2017);  doi:10.1115/1.4038729

Journal of Heat Transfer  |  research-article
2017
Graydon L. Yoder, Jr., Dennis Heatherly and Mario Caja
J. Heat Transfer 140, 042501 (2017) (9 pages);  doi:10.1115/1.4038132

Journal of Engineering for Gas Turbines and Power  |  research-article
2017
Tao Ren, Michael F. Modest and Somesh Roy
J. Eng. Gas Turbines Power 140, 051503 (2017) (10 pages);  doi:10.1115/1.4038153

Journal of Heat Transfer  |  research-article
2017
Reda Ragab and Ting Wang
J. Heat Transfer 140, 042201 (2017) (12 pages);  doi:10.1115/1.4037641

Journal of Heat Transfer  |  research-article
2017
Reda Ragab and Ting Wang
J. Heat Transfer 140, 042202 (2017) (11 pages);  doi:10.1115/1.4037642

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Tasawar Hayat, Mumtaz Khan, Taseer Muhammad and Ahmed Alsaedi
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038700

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Ravi Babu Sajja and Sambasiva rao G
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038701

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Yi Han, Feng Liu and Xin Ran
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038702

Journal of Thermal Science and Engineering Applications  |  Technical Brief
2017
Muhammad Qasim and Idrees Afridi
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038703

Journal of Thermal Science and Engineering Applications  |  research-article
2017
Bijan Nouri, Marc Röger, Nicole Janotte and Christoph Hilgert
J. Thermal Sci. Eng. Appl , (2017);  doi:10.1115/1.4038706

Companion Guide to the ASME Boiler and Pressure Vessel and Piping Codes, Fifth Edition-Volume 2  |  Paper
2018
Jimmy E. Meyer
Companion Guide to the ASME Boiler and Pressure Vessel and Piping Codes, Fifth Edition-Volume 2 ASME Piping Codes: B31.3 Process, B31.5 Refrigeration, B31.9 Building Services and ASME Standards for Piping: B31E Seismic Design, B31J Stress I-Factors, B31T Toughness Requirements (2018) (28 pages);  doi:10.1115/1.861318_ch36

Companion Guide to the ASME Boiler and Pressure Vessel and Piping Codes, Fifth Edition-Volume 1  |  Paper
2018
Chakrapani Basavaraju and Marcus N. Bressler
Companion Guide to the ASME Boiler and Pressure Vessel and Piping Codes, Fifth Edition-Volume 1 Section III: Subsections NC and ND—Class 2 and 3 Components (2018) (54 pages);  doi:10.1115/1.861301_ch7

Companion Guide to the ASME Boiler and Pressure Vessel and Piping Codes, Fifth Edition-Volume 1  |  Paper
2018
Robert I. Jetter and D. Keith Morton
Companion Guide to the ASME Boiler and Pressure Vessel and Piping Codes, Fifth Edition-Volume 1 Division 5—High Temperature Reactors (2018) (46 pages);  doi:10.1115/1.861301_ch17

Risk Importance Measures in the Design and Operation of Nuclear Power Plants  |  Paper
2017
OPEN ACCESS Front Matter
Risk Importance Measures in the Design and Operation of Nuclear Power Plants Front Matter (2017) (10 pages);  doi:10.1115/1.861394_fm

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Zahra S. Hosseini, Mohsen Dadfarnia, Kevin A. Nibur, Brian P. Somerday, Richard P. Gangloff and Petros Sofronis
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Trapping Against Hydrogen Embrittlement (2017) (10 pages);  doi:10.1115/1.861387_ch6

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
M. Bharadwaj, W. C. Hoskins, C. D. Lundin and M. Prager
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Effects of Heat Treatment and Chemical Composition on the High Temperature Hydrogen Attack (HTHA) Resistance of C-½ Mo Steels (2017) (9 pages);  doi:10.1115/1.861387_ch7

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
S. Puydebois, A. Oudriss, X. Feaugas, P. Bernard and L. Briottet
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Relation Between Microstructure and Hydrogen: Consequence on the Fatigue Behavior of Laser Beam Melting Inconel 718 (2017) (8 pages);  doi:10.1115/1.861387_ch35

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Ken-Ichi Ebihara, Kei Saito and Kenichi Takai
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Determination of Detrapping and Trapping Rate Constants for Hydrogen Based on Experimental Thermal Desorption Spectra (2017) (8 pages);  doi:10.1115/1.861387_ch53

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
C. F. Nigro, C. Bjerkén and P. A. T. Olsson
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Kinetics of Crack-Induced Hydride Formation in Hexagonal Close-Packed Materials (2017) (9 pages);  doi:10.1115/1.861387_ch72

Combined Cooling, Heating, and Power Systems: Modelling Optimization, and Operation  |  Paper
2017
Combined Cooling, Heating, and Power Systems: Modelling Optimization, and Operation State-of-the-Art of Combined Cooling, Heating, and Power (CCHP) Systems (2017) (48 pages);  doi:10.1115/1.861COMQ_ch1

 141-160 of 29213 Articles
Volume 2B: 43rd Design Automation Conference
2017
Tong Wu, Namrata Upadhyaya, Douglas Acheson and Andres Tovar
IDETC/CIE2017, pp. V02BT03A008- (2017) 12 pages
doi:10.1115/DETC2017-67975

Volume 2B: 43rd Design Automation Conference
2017
Nordica MacCarty, Grace Burleson, Nicholas Moses, Tejas Mulky, Joshua Johnson, Elizabeth Andreyka, Damon Ogle, Fred Colgan, Adam Creighton, Tom Carter and Dale Andreatta
IDETC/CIE2017, pp. V02BT03A016- (2017) 10 pages
doi:10.1115/DETC2017-67830

Volume 2B: 43rd Design Automation Conference
2017
Paolo Cicconi, Vincenzo Castorani, Michele Germani, Marco Mandolini and Alessio Vita
IDETC/CIE2017, pp. V02BT03A028- (2017) 9 pages
doi:10.1115/DETC2017-67977

Volume 2B: 43rd Design Automation Conference
2017
Paolo Cicconi, Anna Costanza Russo, Mariorosario Prist, Francesco Ferracuti, Michele Germani and Andrea Monteriù
IDETC/CIE2017, pp. V02BT03A029- (2017) 9 pages
doi:10.1115/DETC2017-68020

Volume 2B: 43rd Design Automation Conference
2017
Valtteri Niutanen and Kevin Otto
IDETC/CIE2017, pp. V02BT03A043- (2017) 11 pages
doi:10.1115/DETC2017-67751

Volume 3: 19th International Conference on Advanced Vehicle Technologies; 14th International Conference on Design Education; 10th Frontiers in Biomedical Devices
2017
Narayan Jatinder Bhatia, Elia Missaglia, Giorgio Previati, Gianpiero Mastinu, Kesavan Ramakrishnan and Massimiliano Gobbi
IDETC/CIE2017, pp. V003T01A016- (2017) 12 pages
doi:10.1115/DETC2017-67856

Volume 4: 22nd Design for Manufacturing and the Life Cycle Conference; 11th International Conference on Micro- and Nanosystems
2017
Luis R. Robles, Johnny Ho, Bao Nguyen, Geoffrey Wagner, Jeremy Surmi, Khulood Faruqui, Ashley Carter, Tom Hinz, Fady Kakish, Zachariah Zousel, Kory Matthys and Joseph Piacenza
IDETC/CIE2017, pp. V004T05A046- (2017) 10 pages
doi:10.1115/DETC2017-68396

Volume 5A: 41st Mechanisms and Robotics Conference
2017
Yan Xie, Dengfeng Lu and Jingjun Yu
IDETC/CIE2017, pp. V05AT08A020- (2017) 8 pages
doi:10.1115/DETC2017-68142

Volume 5B: 41st Mechanisms and Robotics Conference
2017
Nathan Price, Andrew Gillman, Kazuko Fuchi, Edward J. Alyanak and Philip R. Buskohl
IDETC/CIE2017, pp. V05BT08A060- (2017) 10 pages
doi:10.1115/DETC2017-68343

Volume 8: 29th Conference on Mechanical Vibration and Noise
2017
Josef Voldřich, Jan Lazar, Pavel Polach and Štefan Morávka
IDETC/CIE2017, pp. V008T12A018- (2017) 12 pages
doi:10.1115/DETC2017-67712

Volume 10: 2017 ASME International Power Transmission and Gearing Conference
2017
Philipp Roth, Werner Sigmund, Sebastian Born, Daniel Kadach and Karsten Stahl
IDETC/CIE2017, pp. V010T11A002- (2017) 8 pages
doi:10.1115/DETC2017-67049

Volume 10: 2017 ASME International Power Transmission and Gearing Conference
2017
V. Roda-Casanova, F. Sanchez-Marin and A. Porras-Vazquez
IDETC/CIE2017, pp. V010T11A006- (2017) 10 pages
doi:10.1115/DETC2017-67724

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Daiwa Sato, T. Iwase, J. Xue, K. Tsuchihashi, H. Obara and N. Fushimi
FEDSM2017, pp. V01AT02A003- (2017) 8 pages
doi:10.1115/FEDSM2017-69115

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Yeon-Ho Lee and Youn-Jea Kim
FEDSM2017, pp. V01AT02A010- (2017) 7 pages
doi:10.1115/FEDSM2017-69263

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Kazuto Kakio and Y. Kawata
FEDSM2017, pp. V01AT03A016- (2017) 7 pages
doi:10.1115/FEDSM2017-69245

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Saqib Naseer, Syed Adnan Qasim and Raja Amer Azim
FEDSM2017, pp. V01AT03A025- (2017) 10 pages
doi:10.1115/FEDSM2017-69307

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Soo Young Kang, Jeong Jin Lee, Tong Seop Kim, Seong Jin Park and Gi Won Hong
FEDSM2017, pp. V01AT03A029- (2017) 9 pages
doi:10.1115/FEDSM2017-69514

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Houda Hachem, Ramla Gheith, Sassi Ben Nasrallah and Fethi Aloui
FEDSM2017, pp. V01AT04A001- (2017) 9 pages
doi:10.1115/FEDSM2017-69010

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Gen Fu and Alexandrina Untaroiu
FEDSM2017, pp. V01AT04A010- (2017) 10 pages
doi:10.1115/FEDSM2017-69356

Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery
2017
Arturo Schiaffino, Ashesh Chattopadhyay, Shaikh Tanveer Hossain, Vinod Kumar, V. M. K. Kotteda and Arturo Bronson
FEDSM2017, pp. V01AT04A013- (2017) 6 pages
doi:10.1115/FEDSM2017-69577

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In