0
Dynamic Systems & Control
Email Alert
Please Wait... Processing your request... Please Wait.

Journal of Tribology  |  research-article
2018
Jianzhong Cui, Jun Liu, Fangwei Xie, Cuntang Wang and Pengliang Hou
J. Tribol , (2018);  doi:10.1115/1.4040376

Journal of Tribology  |  research-article
2018
Jing Liu and Yimin Shao
J. Tribol , (2018);  doi:10.1115/1.4040382

Journal of Offshore Mechanics and Arctic Engineering  |  research-article
2018
Mete Mutlu, Yingjie Tang, Matthew A. Franchek, Rob Turlak and Jose Gutierrez
J. Offshore Mech. Arct. Eng , (2018);  doi:10.1115/1.4040391

Journal of Nuclear Engineering and Radiation Science  |  research-article
2018
Hui Li and Guangxin Zhang
ASME J of Nuclear Rad Sci , (2018);  doi:10.1115/1.4040369

Journal of Mechanisms and Robotics  |  Technical Brief
2018
Mengze Li, Zhaofan Yuan, Tadayoshi Aoyama and Yasuhisa Hasegawa
J. Mechanisms Robotics , (2018);  doi:10.1115/1.4040354

Journal of Applied Mechanics  |  research-article
2018
Hanbin Yin, Shaohua Chen, Lihong Liang, Zhilong Peng and Yueguang Wei
J. Appl. Mech , (2018);  doi:10.1115/1.4040336

Journal of Applied Mechanics  |  research-article
2018
Zhongtong Wang, Jingda Tang, Ruobing Bai, Wenlei Zhang, Tongda Lian, Tongqing Lu and T.J. Wang
J. Appl. Mech , (2018);  doi:10.1115/1.4040330

Journal of Dynamic Systems, Measurement, and Control  |  research-article
2018
Haihong Huang, Rui Jin, Lei Li and Zhifeng Liu
J. Dyn. Sys., Meas., Control , (2018);  doi:10.1115/1.4040325

Journal of Dynamic Systems, Measurement, and Control  |  research-article
2018
Jianqing Li, Changsheng Gao, Tianming Feng and Wuxing Jing
J. Dyn. Sys., Meas., Control , (2018);  doi:10.1115/1.4040326

Journal of Dynamic Systems, Measurement, and Control  |  research-article
2018
Tao Li, Zhipeng Li, Haitao Zhang and S.M. Fei
J. Dyn. Sys., Meas., Control , (2018);  doi:10.1115/1.4040327

Engineering Optimization: Applications, Methods, and Analysis  |  Paper
2018
R. Russell Rhinehart
Engineering Optimization: Applications, Methods, and Analysis Front Matter (2018) (38 pages);  doi:10.1115/1.861OPT_fm

Engineering Optimization: Applications, Methods, and Analysis  |  Paper
2018
R. Russell Rhinehart
Engineering Optimization: Applications, Methods, and Analysis Dynamic Programming (2018) (10 pages);  doi:10.1115/1.861OPT_ch13

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
OPEN ACCESS Front Matter
Chao Li
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Front Matter (2018) (8 pages);  doi:10.1115/1.861677_fm

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Shao-Liang Wei, Wen-Bo Qin, Lian-Wei Han and Feng-Yu Cheng
International Conference on Control Engineering and Mechanical Design (CEMD 2017) The Research of Method of Malignant Load Identification based on Wavelet Analysis (2018) (9 pages);  doi:10.1115/1.861677_ch17

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Ren-Jie Zheng, Ming-Ying Lan and Li Gao
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Key Technology of Interactive Music Game Installation based on Arduino (2018) (6 pages);  doi:10.1115/1.861677_ch19

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Zhong-Shuang Wang, Chang-Shun Xu and He Zou
International Conference on Control Engineering and Mechanical Design (CEMD 2017) The Vector Bond Graph Method for the Dynamic Modeling of 3-RSR Spatial Parallel Robot Mechanism (2018) (7 pages);  doi:10.1115/1.861677_ch28

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy Accuracy-associated Models (2018) (14 pages);  doi:10.1115/1.861615_ch2

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy FSF of Parallel- and Hybrid-kinematics Machines (2018) (36 pages);  doi:10.1115/1.861615_ch5

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy Infinitesimal Mechanics of the PKMs (2018) (20 pages);  doi:10.1115/1.861615_ch11

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy Non-linear Problems of Machine Accuracy (2018) (30 pages);  doi:10.1115/1.861615_ch12

 1-20 of 8530 Articles
Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
Shivakumar Ulaganathan, Ch. Kanna Babu and Girish Kalyanrao Degaonkar
GTINDIA2017, pp. V001T01A003- (2017) 10 pages
doi:10.1115/GTINDIA2017-4528

Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
Zhang Xiao-bo and Wang Zhan-xue
GTINDIA2017, pp. V001T03A013- (2017) 10 pages
doi:10.1115/GTINDIA2017-4771

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Debabrata Gayen, Debabrata Chakraborty and Rajiv Tiwari
GTINDIA2017, pp. V002T05A001- (2017) 9 pages
doi:10.1115/GTINDIA2017-4534

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Sampath Kumar Kuppa and Mohit Lal
GTINDIA2017, pp. V002T05A010- (2017) 9 pages
doi:10.1115/GTINDIA2017-4641

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Ashutosh Kumar and Sashindra Kumar Kakoty
GTINDIA2017, pp. V002T05A011- (2017) 9 pages
doi:10.1115/GTINDIA2017-4646

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Narayana Murty Pilli, Lakshman Kasina, Kondaiah Bommisetty, Sreenivas Karri and Kotur Srinivasan Raghavan
GTINDIA2017, pp. V002T05A021- (2017) 6 pages
doi:10.1115/GTINDIA2017-4733

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Rajasekhara Reddy Mutra and J. Srinivas
GTINDIA2017, pp. V002T05A022- (2017) 8 pages
doi:10.1115/GTINDIA2017-4734

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Manoj Settipalli, Rahul Chandran, Venkatarao Ganji and Theodore Brockett
GTINDIA2017, pp. V002T05A024- (2017) 9 pages
doi:10.1115/GTINDIA2017-4749

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
S. Chandraker, J. K. Dutt and H. Roy
GTINDIA2017, pp. V002T05A029- (2017) 7 pages
doi:10.1115/GTINDIA2017-4781

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Gnanaraj Devadoss, Anil Thokala, Avinash Kumar and Prasanth Kumar Bysani
GTINDIA2017, pp. V002T05A030- (2017) 5 pages
doi:10.1115/GTINDIA2017-4837

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
S. Mohanty and S. K. Dwivedy
GTINDIA2017, pp. V002T05A033- (2017) 10 pages
doi:10.1115/GTINDIA2017-4850

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
N. C. Ajay Vishwath, Cris Thomas, Vindhya Devalla, A. J. Arun JeyaPrakash and Amit Kumar Mondal
GTINDIA2017, pp. V002T08A001- (2017) 8 pages
doi:10.1115/GTINDIA2017-4643

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Apurba Das, Ranojit Banerjee and Amit Karmakar
GTINDIA2017, pp. V002T10A002- (2017) 8 pages
doi:10.1115/GTINDIA2017-4611

Volume 1: Advances in Aerospace Technology
2017
Rasoul Askari, Peyman Shoureshi, Mohammad Reza Soltani and Afshin Khajeh Fard
IMECE2017, pp. V001T03A008- (2017) 7 pages
doi:10.1115/IMECE2017-71884

Volume 1: Advances in Aerospace Technology
2017
Serge Abrate
IMECE2017, pp. V001T03A033- (2017) 6 pages
doi:10.1115/IMECE2017-72247

Volume 2: Advanced Manufacturing
2017
Navid Nazemi, Ruth Jill Urbanic and Syed Saqib
IMECE2017, pp. V002T02A027- (2017) 11 pages
doi:10.1115/IMECE2017-71687

Volume 2: Advanced Manufacturing
2017
Fuhua Li, Tiemin Li, Yao Jiang and Fengchun Li
IMECE2017, pp. V002T02A046- (2017) 8 pages
doi:10.1115/IMECE2017-70863

Volume 2: Advanced Manufacturing
2017
Zheng Wang and Patrick Keogh
IMECE2017, pp. V002T02A079- (2017) 6 pages
doi:10.1115/IMECE2017-71670

Volume 2: Advanced Manufacturing
2017
Kristina Wärmefjord, Rikard Söderberg, Lars Lindkvist, Björn Lindau and Johan S. Carlson
IMECE2017, pp. V002T02A101- (2017) 10 pages
doi:10.1115/IMECE2017-70398

Volume 2: Advanced Manufacturing
2017
Robert Bohlin, Jonas Hagmar, Kristofer Bengtsson, Lars Lindkvist, Johan S. Carlson and Rikard Söderberg
IMECE2017, pp. V002T02A110- (2017) 7 pages
doi:10.1115/IMECE2017-71405

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In